MAL 4737-034 Luri Metal Textile Pendant Light Instruction Manual
- June 4, 2024
- Luri
Table of Contents
MAL 4737-034 Luri Metal Textile Pendant Light
**Instruction Manual
**
MAL 4737-034 Luri Metal Textile Pendant Light
Safety directions / Please read this information carefully before installing or using this product. Please keep this user manual for further reference.
-
The lamps may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
-
The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
-
Maintenance of the lights is limited to the surfaces. For electrical safety reasons, this product must not be cleaned with water or other liquids. Use
only a dry, lint-free cloth for cleaning. -
****Caution! Risk of electric shock. Before connecting to the mains, always check the entire light for possible damage. Never use the light if you
notice any damage. -
Caution! Disconnect the main cable from the power supply before assembling or disassembling. Switch off the earth leakage circuit
breaker/automatic circuit breaker or unscrew the fuse. Turn the switches to “OFF”. -
****Caution! Before drilling the mounting holes, make sure that no gas, water, or electricity pipes and wires can be drilled through or damaged in
your chosen mounting location. -
When mounting, ensure that the attachment material is suitable for the subsurface and that this surface is capable of carrying the weight of the
fixture. The manufacturer is not liable for improper installation of the item on the relevant subsurface. -
****The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed of with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic devices. Please ask your local municipality for the point of acceptance.
-
Safety class I This light must be connected to the earthed conductor-terminal with the earthed conductor (green-yellow wire) .
-
Description of the supply terminals: L = Phase N = Neutral conductor = Earthed conductor.
-
Do not install the light on a damp or conductive subsurface.
-
Please make sure that no cables get damaged during the installation work.
-
Attention! During operation, lamp parts and illuminants can reach temperatures of more than 60°C. Do not touch during operation!
-
The lamp may only be adjusted and positioned after having cooled down.
-
Caution! Risk of burns due to hot surfaces. First, allow the light to cool down completely.
-
This product is intended for normal operation and may only be used for ceiling mounting.
-
The lights have a protection class rating of “IP20“ and are solely intended for indoor use only in private households.
-
The maximum wattage indicated for each lighting unit must not be exceeded.
-
Make sure that illuminants are securely fixed during the installation.
-
Please make sure that illuminants have first cooled down before replacing them. Attention! Switch the mains power line to zero potential and switch off the circuit breaker and/or remove the fuse before!
-
Do not look directly into the light source (illuminant, LED, etc.).
-
The following accessories are not included in delivery: illuminants
-
The included or insertable light bulb can be replaced by the end customer.
-
This product can be used with light bulbs of the energy efficiency classes “A – G“, based on the EU regulation 2019/2015.
00800/BRILONER
(00800/27456637) Briloner Leuchten / Im Kissen 2 / 59929 Brilon
Revision 00_05/2022
Documents / Resources
| Luri
MAL 4737-034 Luri Metal Textile Pendant
Light
[pdf] Instruction Manual
MAL 4737-034, Luri Metal Textile Pendant Light, MAL 4737-034 Luri Metal
Textile Pendant Light, Metal Textile Pendant Light, Textile Pendant Light,
Pendant Light, Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>