Tqsky T1 Slim Light and Fashionable AR or XR Glasses User Manual
- June 5, 2024
- Tqsky
Table of Contents
Tqsky T1 Slim Light and Fashionable AR or XR Glasses
Please keep it properly when traveling to avoid failure caused by extrusion of
products by external forces.
Don’t pull the glass’s leg excessively to avoid damage to the product by
external force.
The product shall not be washed or soaked with water to avoid short circuits
of the product.
Don’t wipe the lens with paper towel or towel, and use professional cleaning
tools to avoid adverse effects on the product.
When connecting products through T-Box, ensure that the power of T-Box is
sufficient.
When using mobile phone to connect glasses directly, the mobile phone used
shall support DP protocol.
The data transmission line of this product is damaged or abnormal, please stop
using and replace the data transmission cable.
OVERVIEW
T1
Model: T1
Display: Dual Display Module;
FOV43;192010802
Audio: HD Directional Speaker 2
PowerPort: USB Type-C-DP
Input:5V=1A
Rotate the knob clockwise to increase the degree of myopia; rotate the knob counterclockwise to reduce the degree of myopia- The lens with different colors can be replaced by taking off and buckle
- The position of the nose rest can be adjusted according to the shape of the nose
- If the video is in 3D format, long press for 5 seconds to switch the 3D mode, and long press for 5 seconds again to exit the 3D mode.
T-BOX
Model: T-Box
Battery:5000mAh
Input:5V=2A
PowerPort: USB Type-C-DP
Mirror Projection
Press and hold the start button of T-Box to start T-Box
Connect glasses and T-box
Turn on the WIFI of the phone and connect
Turn on “Screen Mirroring
Connect the wireless projection deviceTQSKY-TBOX”
Wireless Projection
-
Press and hold the start button of T-Box to start T-Box
Connect glasses and T-box -
Turn on the WIFl of the phone and connect
DIRECT-TQSKY-TBOX-
Turn on “Screen Mirroring”Connect the wireless projection device “TQSKY-TBOX”
Network Projection
Open the Wiki of the mobile phone and find the hotspot “DIRECT-TQSKY-TBOx-**
Open the browser, enter IP (192.168.49.1), connect to the current moment WIFI.
Open the APP that can support the screen projection function and click the
“TV” screen projection button.
Mobile Direct Connection
Mobile phones that support USB Type-C-DP are required
-
Connect mobile phone and glasses
The mobile phone displays “wired projection”, and click “agree -
Wired Direct Connection
Connect the glasses to the converter, and then connect the HDMI port of the adapter to STEAM, X-BOX, PS5, SWITCH and other devices
Low Blue Light (Hardware Solution) was developed to control the blue light
range emission.
Instead of reducing the total blue range, the selected range reduction does
not impact CCT and display color.
It exposes users to less blue light emission while letting them enjoy good
color on the display.
TUV Rheinland has tested this product in order to ascertain the product can
offer an effective reduction of hazardous blue light by offering a hardware
solution that can filter or reduce the blue light range of the display
spectrum.
Flicker Free confirms that the device has no visible and invisible flicker
within the range of 0- 3000 Hz under various brightness settings.
Recommendations for use:
It is recommended to not use the glasses for more than 2 hours per session.
Take at least a 10 to 15 minutes break every 45 minutes, even if you don’t
think you need it.
Please take more regular or longer breaks needed.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user s authority to operate the equipment
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Manufacturer: Shenzhen TQSKY Technology Co.,Ltd. ;
Address: Room 2306, Haowei Technology Building, No. 2, Keji Nan 8 Road,
Nanshan District, Shenzhen city, Guangdong Province, china
