4 BABY CAR SEAT GR. IlI: 22-36 KG User Guide

June 4, 2024
4 BABY

CAR SEAT GR. I: 22-36 KG
**User Guide

**

WARNING

  • This is a “Universal” child restraint; it is approved by ECE Regulation 44.04 for general use in vehicles and will fit most, but not all, vehicle seats.
  • Read this instruction manual carefully. Study the illustrations before using the car seat and during installation. Save this manual in the storage compartment for future reference.
  • The baby car seat is a safety product and is only safe when used according to the instructions.
  • Correct routing of the seat belt is essential for the safety of your child. Never thread the belt in a manner other than the one described in this manual.
  • Never leave your child unattended in the car.
  • DO NOT use a child safety seat if the vehicle is equipped with a front airbag. This can be dangerous. This does not apply to so-called side airbags.
  • No alterations may be made to the car safety seat (seat and harness belt) as this could affect part or the overall safety of the seat.
  • After an accident, your car safety seat should be replaced. Although it may appear undamaged, if you were to have another accident it would not protect your child as well as it should.
  • Ensure that all luggage/objects, on the parcel shelf for instance, likely to cause injury in the event of an accident are properly secured.
  • The car safety seat must not be used without the cover. Always use an ORIGINAL car safety seat cover, as the cover contributes to the safety of the seat.
  • The safety of the seat can only be guaranteed by the manufacturer when used by the original owner. We strongly advise you not to use a second-hand product, as you are never sure if the seat has been involved in an accident or whether it has been otherwise damaged.
  • The baby car seat can be used in the front or back seat of the car, provided that the seat is not equipped with an airbag. ONLY use the baby car seat with a 3-point automatic or 3-point static seat belt, provided that is approved according to ECE R16, or an equivalent standard.
  • The seat must always be secured with a seat belt, even when not in use A loose car seat can injure the other passengers in the car during an abrupt stop.
  • Make sure the car seat fits property in your car before purchasing.
  •  It is advisable not to use car safety seats longer than 5 years after the date of purchase. Due to the aging process of the plastic, for instance, the quality of the product may have unnoticeably deteriorated.
  • Make sure the baby car seat does not get trapped or overloaded by heavy baggage, reclinable seats, or slamming doors.
  • Always cover the baby car seat when the car is parked in the sun.

NOTICE

  • This is a”Universal” child restraint. it is approved to Regulation No.44,04 series of amendments, for general use in vehicles and it will fit most, but not all, car seats.
  • A correct fit is likely if the vehicle manufacturer has declared in the vehicle handbook that the vehicle is capable of accepting a”Universarchild restraint for this age group.
  • This child restraint has been classified as “Universal’ under mom stringent conditions than those applied to earlier designs that do not carry this notice.
  • If in doubt, consult either the child restraint manufacturer or the retailer.

CLEAN AND MAINTENANCE

  1.  The cover must be washed by hand at a maximum temperature of 30°. Do not wash by machine. Never iron the cover at a high temperature.

STRUCTURE

  1. Seat armrest
  2. Base
  3. ISOFIX attachment
  4.  ISOFIX release button
  5.  Seat belt lock

4 BABY CAR SEAT GR IlI 22 36 KG - fig 1

INSTALL POSITION OF THE CHILD SEAT IN VEHICLE

4 BABY CAR SEAT GR IlI 22 36 KG - fig 2

Only suitable if the approved vehicles are fitted with a 3-point safety belt , approved to UN/ECE Regulation No.16 or other equivalent standards.
4 BABY CAR SEAT GR IlI 22 36 KG - fig 3 Not to use in seating positions where an active frontal airbag is installed.
Only use on this seat if ISOFIX anchorages are fitted.
4 BABY CAR SEAT GR IlI 22 36 KG - fig 4

  • The ISOFIX attachments can be adjusted for many positions to fit the different positions of ISOFIX low anchorages expending from the car seat.
  • Press down the release button to adjust the ISOFIX attachment of both sides to the longest. Then put the ISOFIX attachments into guide sleeves, and insert them into ISOFIX anchorages. Make sure that you have heard a “click” and the ISOFIX latching indication shows GREEN.
  • If you want to release the ISOFIX attachments, just installation of the ISOFIX attachments is finished. Push the red release button of the ISOFIX chuck in the direction shown, and the ISOFIX chuck will be released.
  • After install led the ISOFIX chuck, push the child restraint forwards until it is tight against the car seat. Now, the ISOFIX base is installed in place.

INSTALLATION

METHOD I: ISOFIX + 3-POINT BELT
4 BABY CAR SEAT GR IlI 22 36 KG - fig 5
Slip the car seat belt Into the seat belt lock. Imp: Go behind the shoulders of the child!
Place the safety seat on the car seat, and at the same time ISOFIX locks the car ISOFIX interface, when you hear”KA; the release button is green. Make sure close to the car seat. Then place the child on the safety seat, and insert the car seat belt through the seat belt lock around the child’s body into the car safety card slot according to the installation path shown in the figure.
MONTAt II: PAST 3-PUNKTOWE
Place the safety seat on the car seat, close to the car seat. Then place the child on the safety seat, and insert the car seat belt through the seat belt lock around the child’s body into the car safety card slot according to the installation path shown in the figure.
MONTA2 II: PASY 3-PUNKTOWE
Place the safety seat on the car seat, close to the car seat. Then place the child on the safety seat, and insert the car seat belt through the seat belt lock around the child’s body into the car safety card slot according to the installation path shown in the figure.
4 BABY CAR SEAT GR IlI 22 36 KG - fig 64 BABY CAR
SEAT GR IlI 22 36 KG - fig 7After the belt is fixed, the seat buckle and belt guide hook can not be placed in this position. Please contact the manufacturer if in doubt.
IMPORTANT! Make sure the car seat belt is not slack or twisted.

4 BABY Sp. z o.o. ul. Kasprowicza 72, 20-232 Lublin, Poland tel.
+48 81 746 15 80 / info@4baby.pl www.4baby.pl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals