Jinepin PN-W23 36000mAh Solar Charging Power Bank User Guide

PN-W23 36000mAh Solar Charging Power Bank

Important safety instructions

Warning: When using this product, basic precautions should always be followed, including the following:

A. Carefully read the User Manual before using the power bank.
B. Close supervision is needed when the power bank is used near children.
C. Do not strike, hit or insert any foreign objects into the power bank or any of its ports.
D. Do not expose the power bank to heavy rain/snow to avoid malfunction.
E. Do not immerge the power bank into water to avoid malfunction.
F. Do not disassemble or reassemble the power bank without authorization from manufacturer.
G. Do not use the power bank if it has been damaged or modified. If you see any bulging, swelling, leakage or other abnormality from the power bank, stop using it immediately.

Special Attention

1. The suggested working/storage temperature is between-4F and +140°F (-20°C*+60’C).

2. Do not expose a power bank to fire or extreme high temperature.
   Exposure to fire or temperature above 176°F /80°C may cause battery swelling up or explosion.

3. Do not leave the power bank on the car dashboard without supervison. Under hot weather, the temperature inside a parked car can reach above 176F/80C, where the battery may swell up or explode.

4. Do not leave the power bank on the flat surface of concrete, metal and wooden floor to have the battery being solar charged. Under strong Sunlight, the surtace temperature of concrete, metal and wooden floor may reach above 176°F /80°C, where the battery may swell up or explode.

5. For solar panel charging, we recommend that you hang the power bank in a ventilated environment for solar charging to avoid swell up of the battery due to extremely high temperature.

Legal and Regulatory Compliance

All power banks have undergone extensive tests and the strict quality control procedure.Both our factory and products are tested and certified.

1. ISO 9001: Quality management system that demonstrateits our ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements.
2. UN38.3 Test Certificate: This ensures that the battery cell used in the power bank adheres to safety standards for things like maximum continuous charge voltage, cut-off voltage, cell numbers, nominal voltage, discharge etc.
3. MSDS Certificate: This is the Material Safty Data Sheet, all our power banks come with MSDS sheets, these sheets outline the hazardousness material with batteries, handling procedures, precautions etc.
4. UL 2056 Test Certificate: A safety standard proves that the products has been going through a series of in-depth evaluations by UL expert engineers.
5. CE Certificate: All our power banks are certified with CE certificates to ensure they comply with regulations for sale in Europe Market.

Product Maintenance:
To ensure the maximum efficiency of this product, please pay attention to the following matters.

1. Keep away from moisture and corrosive substances.
2. Do not use chemicals to clean the product.
3. When the product is not used for a long time, please charge it once every six months.

PRODUCT DETAILS

Thank you for choosing our product, here is the instruction for your better experience.

Product Parameters

Package Include

• Solar Charging Power Bank x 1
• Charging cable x3
• Carabiner x 1
• User manual x 1 1

Product Specifications

1. Exclusive appearance design, fashion, beautiful.
2. Made of original A-grade polymer battery, sate, stable, and durable
3. Wireless charging, compatible with all Qi standard smartphones
4. High-capacity portable power bank, support multiple USB ports output at the same time.
5. Built-in solar panel charging input, charging anytime, anywhere
6. Equipped with LED lights, convenient for outdoor use.
7. The power bank can be load with two charging cables, venient for use. (3 cables provided in total)

Instructions

Turn on/off

Press the power button to turn on the power bank, the LED indicators will light on. Without the device connected, the power bank will automatically shut down after 30 seconds.

Charge the power bank

Solar charging
Place the solar panel facing upward in the direct sunlight, the sunlight will be converted into electricity to charge the power bank.
The solar charging performance will be more effective under strong light.

When the temperature is high in summer, please do not place the power bank on the concrete floor, car, and other places where heat gathers. When the body temperature of the power bank exceeds 50 degrees, please stop using solar charging.

Power charging
Plug the TYPE-C/Micro USB/Lightning cable into the input port to charge the power bank. The LED indicators will flash when charging and stay on when fully charged.

1. Charging cell phones and other electronic products

   • With cables
     Press the power button to turn on the power bank, plug the cable into the USB output ports, the other end is plugged into the power connector of the product to be charged.

   • With wireless charging

2. Press the power button and the green indicator light on the back. Align the phone with the wireless charging area of the product to charge the phone Wirelessly. The phone case must not contain metal, and the case’s thickness must not exceed 4mmn when using wireless charging

3. LED light
   Press and hold the power button for 3 seconds to turn on/off the LED Iights. Please turn the LED lights off to save power when no need to use.

Warning

1. This product is suitable for charging equipment within the specifications of DC5V/3A, used charging equipment beyond this specification may cause damage to the product.
2. Please do not disassemble or modify this product
3. Please pay attention to fire and moisture, to prevent malfunction.
4. Do not use this product in a high-temperature environment 55 C).
5. Please connect the equipment that meets the output specification of this product.
6. Please do not use it for too long.
7. If the battery expands, leaks, or emits a strange smell, please stop using it immediately.

Common problems and solutions:

Turn on the power button and the LED indicators show blue.

• Battery power is about to run out, please charge it immediately
  Unable to charge the power bank

• Replace the charger adapter and charging cable and try to charge again
  Cannot charge the phone or other devices

• Please plug and unplug the charging cable again to connect the cell phone and the power bank.
  The power bank cannot be fully charged even being charged for a long time.

• Please use the cable equipped and the charger adapter that supports 5V/2.1A or above output.

• The current of Lightning charging is low, resulting in a long charging time, it is recommended to charge the power bank through Micro USB or Type-C input.

Other common treatment methods:

• Check if the button is flexible
• Check if the charging indicator is well when charging
• Check whether the USB input cable is good and whether there is any abnormality after connecting to the power bank
• Check if the USB output cable is good and if there is any abnormality when connecting to the device that needs to be charged
• Check if there is any abnormal noise or odor in the product
• Please do not disassemble the power bank, the warranty does not cover human-made damage
• lf the problems cannot be solved after the above methods, please contact our after-sales service for help.

Warranty and After-Sales Service

1. Every GOODaaa product is provided with at least 12 months of warranty and lifelong technical support.
2. Within 30 days from the date of purchase, products in good packaging and without damage can be returned and fully refunded. Please noted that customers will bear the shipping fee if products have no quality problems.
3. Free exchange for products having quality problems within 12 months.
4. If you are not 100% satisfied with our products, please feel free to contact our customer service at support@GOODaaa.net.
   We attach great importance to customer feedback and will get back to you within 24 hours(excluding weekends).

FCC Statement

This equipment has been tested and found to comply with the limits tor a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy a nd, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmtul interterence, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or moditications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>