ToniTrui 1022-001 Cabinet Door Magnetic Catch Installation Guide
- June 1, 2024
- ToniTrui
Table of Contents
ToniTrui 1022-001 Cabinet Door Magnetic Catch
Product Features
- Adopting high-quality magnets to provide long-lasting strong magnetic force.
- The shell is stamped from real stainless steel, which is not easy to rust in a humid environment.
- The installation of nail-free adhesive is firm and sturdy, and it is not as easy to age as double-sided adhesive.
- Mini size.square design, or any combination, providing stronger magnetic attraction.very suitable for DIY
Important Notes
- This product is not suitable for doors with tension, such as caused by damage to hinges.
- This product is not suitable for scenarios where the gap is too large and the spacing cannot be reduced.
- Apply nail-free glue to the side where the magnet cannot be seen.
- The nail-free glue should not be applied too much to avoid overflow.
- Stick the magnetic catch on the door and press firmly to adhere sturdily.
- Stick the strike plate on the door magnet, Apply adhesive on the strike plate.
- Please close and open the door after 8 hours to get a good adhesive bond.
Installation Steps
- Clean up where to paste
- Apply nail-free glue on the back (do not apply on the front of the magnet)
- Paste fixed
- Put the iron piece on the magnet
- Apply nail-free glue to the back of the iron sheet and spread it evenly.
- Merge drawers and let sit for 24 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>