TAOPATCH 1715112309 Photonic Cap User Manual
- June 1, 2024
- TAOPATCH
Table of Contents
TAOPATCH 1715112309 Photonic Cap User Manual
CONNECTION DIAGRAM FOR USE
- Connect one end of the controller cable (male connector) to the connector (female) on the back of the cap, next to the closure, and insert the connector on the 12V power supply (male connector) on the other end of the controller cable (female connector). At that point, plug the 12V power supply into a power
- Connect one end of the controller cable (male connector) to the connector (female) on the back of the cap, near the Insert the other end of the controller cable (female connector) to the 5V to 12V USB converter cable (male connector). Then connect the USB 2.0 connector of the 5V to 12V USB adapter cable to the USB power bank socket (not supplied) to power the cap.
PROCEDURE FOR CONTROLLER USE
- Turn on by pressing the Power button once, which will illuminate all the Press the button again to turn on all the LEDs and select the 10HZ pulsed light mode.Press the button again to turn it off.
- After turning the power on, press the Light Mode button until the display shows “RED 660nm / NIR 850nm / ALL”.
- Then, select the light intensity, which can be set in ± 5 steps, L0 20%, L1 40%, L2 60%, L3 80%, L4 100%.
- Finally, press the Time button to add 5 minutes at a time (up to 30 minutes). Press the button until “ALL”, this way it will always be on without using the timer.
WARNINGS
- Many studies have shown the effectiveness of light therapy in improving
- It is recommended not to look directly at the LED light in order not to cause damage to the eyesight.
- This cap is not recommended for children and pregnant Do not use it if you have skin sensitivities or if you are taking skin medications. In case of illness, please consult your doctor.
- If you feel warm while using the LEDs, adjust the intensity until you find your ideal temperature.
- LED diode is sewn and wrapped in SBR cloth. Do not soak in water or get it wet when in use, but keep it dry to prevent
- When cleaning the cap, make sure that the device is not connected to any power source and disconnect it from the power input. Clean the fabric part of your cap with a toothbrush so you don’t wear out the LEDs.
- Disconnect the cap and store it in a cool, dry Do not immerse the box in water or in a place that is too wet.
- Do not expose it to strong sunlight, radiation or high temperature, because it may affect the life of the product.
- After using the product, it is recommended to put on a protective nylon It is recommended to avoid rubbing or flaunting it to prevent damage to the LEDs.
We thank you for purchasing our red phototherapy, we hope you can reap the benefits at home.
An extensive bibliography demonstrates the benefits of light therapy on brain
healing. Taopatch® PHOTONIC CAP works with the right wavelengths to penetrate
different depth levels, achieving good results in pathologies such as
Parkinson’s, Multiple Sclerosis and
Alzheimer’s. It can also improve emotional well-being, concentration, memory
and sleep.
PRODUCT TECHNICAL SPECIFICATIONS
| Parameter | Data |
|---|---|
| Nominal Power | 55W |
| LED (Quantity) | 110LED*0.5W |
| Actual Power | Dimmable (L0 20% 4W, L1 40% 8W, |
L2 60% 12W, L3 80% 16W, L4 100% 20W)
Wavelengths| RED 660nm1pcs / NRI 850nm2pcs
Product dimensions| L280W193H134mm
Net weight| 160gr
Magnetic field intensity| 0 µT (Safe)
Radiation| 0cm > 135 mW/cm2
Time| 30 minutes
Material| Fabric
Service life| Over 50,000 hours
THE BOX INCLUDES
| 1* Red phototherapy cap | 1* Adapter (1.5m) |
|---|---|
| 1* USB cable (1m) | 1* Controller cable (1m) |
| 1* User manual |
HOW IT WORKS
Ultra-light laser therapy – also called red phototherapy and cold laser therapy – radiates photons into the skull tissue, which absorbs them. It is widely believed that the procedure is safe and tolerable.