iwata 12-X Hvls Ceiling Fan Instruction Manual
- June 1, 2024
- iwata
Table of Contents
Iwata 12-X Hvls Ceiling Fan
Features and Uses
- The rare earth Ndfeb permanent magnet synchronous external rotor motor directly drives the fan blade.
- The blade is made of high-strength aluminum alloy material, with a high lift-resistance ratio aviation airfoil design.
- The installation hanger adopts an adjustable structure and automatically adjusts the perpendicularity.
- Suitable for houses, classrooms, offices, shops, hospitals, supermarkets hotels, and many other public places for ventilation and improving the environment.
Operating Instructions
- Please refer to the installation and operation specification before installation. Check the spare parts carefully to prevent bumping or damage during transportation.
- The ceiling fan should be used at the voltage and frequency specified in the nameplate and should not be used in an excessively wet or corrosive environment.
- The ceiling fan is controlled by the inverter. Press the “START/ STOP” button, the “RUN” indicator lights up and the ceiling fan runs.
- The air volume can be adjusted by the key “INCREASE” and “DECREASE”.
- When turning off the ceiling fan, please press the “START/ STOP” button. The STOP” indicator lights up and the ceiling fan stops running.
Specification
Button icon/indicator icon
Definition and operation instructions
Installation Diagram
- Permanent magnet synchronous external rotor motor
- Blade
- Motor mounting parts
- Mounting bracket
- Connecting square tube
- Blade flange
Installation dimensions and wiring
- Ceiling fan
- The ceiling fan is installed in hoisting mode as shown in Figure 2-1, Figure 2-2, and Table 2-1.
- The ceiling fan is installed in hoisting mode as shown in Figure 2-1, Figure 2-2, and Table 2-1.
- Wiring
- Power input cable (single-phase power supply example)
- The power distribution terminal for the customer is on the table. A 3m power cable for the control box is provided as standard. If the required power cable length exceeds 3m, route cables accordingly.
- Distributed wiring diagram, power cable, and circuit breaker specifications.
- Centralized wiring diagram, power cable, and circuit breaker specifications
Product advantage
- Permanent magnet synchronous external rotor motor.
- Features: High efficiency and energy saving (85% efficiency), small size and lightweight; The IP65 structure of the motor is waterproof and dustproof.
- Blade
- Features: Aviation blade design and high-density aluminum alloy material as high strength, impact resistance, long service life, product air volume, high wind pressure, uniform air volume, high efficiency, and energy saving.
- Product performance
- Omnidirectional natural wind covers a super large area. Soft, comfortable, and cool wind makes people feel temperature drop scale from 2°C ~ to 6°C. Using together with a central air-conditioner, the effect of this fan will be much better.
- High efficiency and energy saving are achieved.
- Omnidirectional natural wind
- Inverter
- Developed in cooperation with a professional manufacturer of inverters with over-current protection, over-voltage / under-voltage protection, overload protection, and effective matching with fans.
- Start, accelerate, decelerate, and stop softly without impact, it can effectively reduce vibration and noise.
- Features
- Steel beam locking safety structure protection.
- Hanger safety steel cable protection.
- Safety design of step type reverse buckle inside the motor.
- Permanent magnet self-locking safety protection.
- Reinforced blade mounting bracket.
- Blade safety link mechanism protection.
- Control system overload protection.
- High-strength fasteners as Grade 12.9.
- CE and CB certification.
Wind speed curve for optimal use area
Common Faults Handling
- Abnormal sound of the motor
- The magnetic steel inside the motor is loose or broken, leading to internal friction.
- Shaking blade
- In long-term operation, when there is a sudden power failure and the fan is turned on immediately, shaking blade is likely to occur in this case. Please wait for the motor to stop completely, then restart.
- Check whether the safety wire rope is loose. If it is loose, tighten the wire rope again.
- Fault and Diagnosis
Cautions
- Do not throw anything and jump under the ceiling fan. Users with lower ceilings should pay more attention.
- Do not allow to hold up any objects under the rotating ceiling fan to prevent them from contacting the ceiling fan and causing mechanical injury
- Do not cut off the ceiling fan directly when turning it off. In case of sudden overload protection, press STOP to shut it down and restart it.
- In case of abnormal noises, smoke, or blades not rotating when using ceiling fans, please contact qualified full-time personnel for inspection and maintenance.
- Except for the scope of maintenance permitted in this specification, non-professional personnel shall not disassemble, repair, or modify the fan on their own, and all disassembly.
- All repair or modification personnel must hold an electrician’s certificate and an aerial work certificate to operate
- Turn off the ceiling fan immediately when running with a strong wind to avoid danger or accidents.
- It is strictly prohibited to touch any wiring terminal of the product or disassemble parts of the product under the energized state, otherwise it may be dangerous!
Maintenance
- Regularly check the running state of the ceiling fan and check if the fan runs abnormally or emits abnormal noise.
- Regularly check the working status of the control box whether there is a failure.
- Check whether the blade is horizontal or shaking.
- Check whether the fastening bolts are loose.
- Check the building structure where ceiling fans are installed.
- Check the tension of the protective rope.
- Check if the power wire is damaged.
- The fan must be cleaned periodically to keep it clean and attractive.
- When cleaning the fan, the power supply should be cut off first. Arrange professional aerial workers with a soft sweep, soft cloth or a little cleaning liquid wipe (do not use gasoline or other corrosive liquid such as paint parts) to clean and dry with cloth.
- Be careful not to let water flow into the motor or contact other electrical components with water when cleaning; Do not collide with the blade or change the angle of the blade.
- Please clean the air inlet and outlet on both sides of the inverter regularly, which is conducive to the heat dissipation of the inverter.
INSTALLATION INSTRUCTIONS
- Determined installation scheme
- Wear labor safety protection equipment (safety helmet, safety belt for high-altitude operation, and professional insulating shoes). The installation personnel must qualify for high-altitude operation and electrician certification.
- Estimate that the structure has sufficient bearing strength and can be installed safely and firmly. Measure the installation height and evaluate the safety distance (refer to operation instructions) between the blades and building and lamps after the installation. Adequate lifting platform space is reserved below the ceiling fan for easy maintenance and overhaul.
- Determine the installation position of the control box, evaluate the safety of the high-altitude wiring passing through, and measure the total wiring length.
- Isolate the installation area.
- Ground auxiliary work
- Open the box and check the quantity and integrity of all the parts according to the packing list
- Prepare the tools required for aerial work, and confirm that the equipment is in normal condition.
- Insert the power cable into the plastic-coated metal hose using a cable threading tool. Ensure that both ends of the power cable expose enough length of the plastic-coated metal hose for connecting cables. Finally, use a multimeter to measure both ends of the power cable and check whether the cables are broken.
- Install the motor mounting plate on the motor shaft.
- Installation of lifting bracket group
- Install the ceiling fan mounting support
* Cement floor/cement beam structure
* Pipe beam structure
* Steel beam structure
2. Install the connecting square tube- Installation of motor
- Place the motor equipped with the motor mounting plate on the high-altitude working platform, align the mounting hole of the motor mounting plate with the mounting hole of the square tube, and fix it with bolts.
- Measure the verticality of the connecting square tube and the levelness of the motor using a level, and tighten the bolts and locknut.
- According to the installation structure, cut a wire rope of appropriate length, pass the wire rope through the connecting square tube, bypass the beam, and tighten both ends of the wire rope with the wire rope tie for safety protection.
- Wiring and installation of inverter
- Fix the plastic-coated metal hose with wire clamps. The two ends of the hose are fixed with two wire clamps respectively, and the middle is fixed with a wire clamp every 1.5 meters; Clamps are firmly installed, which can not be disassembled by hand or prised loose and can not be arranged on the temporary member.
- Pass the sheath wire through the connecting square tube connect it with the electronic wire of the same color as the motor and fix it with the closed circuit terminal.
* After connecting the power cable and the motor cable, bind them with cable ties and insert them into the connecting square tube to keep their appearance neat.
* The inverter is installed in a suitable position for convenient operation, at least 1.5 meters above the ground, firmly installed, and must meet the requirements of safe electricity consumption.
* Connect the power cord and motor line to the inverter terminal according to the number tube instructions.- No-load test run of the motor
- After checking that all the connections are correct, switch on the inverter and check the parameter settings of the inverter.
- Switch on the motor, check if it is running normally, and no abnormal noise.
- After passing the no-load operation inspection, turn off the power supply.
- Installation of protective wire rope
- According to the installation structure, measure the length of the cable-stayed protective wire rope rope, and cut four pieces of cable-stayed protective wire ropes.
* One end of the protective wire rope is tied into a safety lock with a wire rope rolling head, and the other end is reserved for the pull codes.
* (To ensure safety, the length of the connecting square tube must be 1 meter or more, and the ceiling fan must be fitted with wire rope.)
2. Fix the 4 protective rope ends with safety locks on the 4 supporting points, and the other end is hooked to the mounting hole of the motor through a wire rope tightener.
3. Keep the motor horizontal by adjusting the wire rope tightener- Installation of blade and blade holders
- Place the blades on the lifting operation platform, align the blades with the installation position of the blades on the upper-end cover of the motor, fix them with bolts, and install the six blades in turn.
- Tighten other bolts after the blade is installed.
- Install six connecting rods in turn on the installation holes reserved for the blades, and pay attention to the correct positions of the connecting rods above and below the connection points, as shown in the following figure.
- Checking after completed installation
- Check the square tube verticality and the motor horizontal.
- Lower the lifting operation platform and manually rotate the blade under the ceiling fan to ensure smooth rotation without mechanical collision.
- Install the motor decoration cover.
- Check all fasteners and make sure that they are securely installed. Use a marker to mark all bolts and lock nuts. Take pictures of bolts and lock nuts at key positions for archiving.
- Trial operation
- Switch on the inverter and run the ceiling fan by adjusting to the highest speed… Check the output current of the inverter and confirm that the motor is not overloaded and the ceiling fan is operating normally.
- Repeat start and stop three times and run the fan continuously for more than half an hour. Ensure that the ceiling fan starts, runs and stops properly.
Packing list
Standard part list
For after-sales service:
- Berton’s Place #46 Sta. Rosa Street Barangay Manresa Quezon City, Philippines.
- Tel Nos. 8282-5049; 8282-5098
- Mobile Nos. : 0908-8908597; 0917-3079188
- Email:iwata@colentco.com, iwata2@colentco.com, iwata3@colentco.com
- sales_mktg@colentco.com
- Website:www.colentco.com
- Before operating this series unit, please read this manual carefully.
Documents / Resources
|
iwata 12-X Hvls Ceiling
Fan
[pdf] Instruction Manual
12-X Hvls Ceiling Fan, Hvls Ceiling Fan, Ceiling Fan, Fan
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>