EPOFIT B0CSK3CZM9 28 X 84 Inch Sliding Door 2M Classic Instruction Manual
- June 1, 2024
- EPOFIT
Table of Contents
EPOFIT B0CSK3CZM9 28 X 84 Inch Sliding Door 2M Classic
HARDWARE LIST
INSTALLATION METHOD
Installation examples of 2m classical standard
- Step 1: Drilling and Installing Track
- Specific drilling location : the gate height increases by 43 mm, which is the position of the central hole of the track.
- The center position is the edge of
- Install the track on the wall in the
- Please drill the hook according
- Then install the anti-slipping the door + 120 mm and the height of the order of fittings shown in the figure. to the size of the side drawing. block on the top of the door and the door + 43 mm, drilling holes to the horizontal line according to the rotate the anti-slipping block to the distance of 450 mm holes. Drilling the outside of the top of the door. diameter: M8, depth 30 mm.
- Hang the door with a hook and anti-dislodging on the track, and adjust the anti-dislodging under the track to prevent the hook from jumping out of the track.
- The installation dimension of the pendulum stopper at the center of the sliding trajectory of a wooden door (need to slot the bottom of the door in advance) is shown in the figure.
- Adjust the stroke of the door and install the limiter. After the adjustment is completed, tighten the screw with a 7-word hexagonal key.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>