CANDY HW50-BP1026 Washing Machine

Specifications

• Brand: Haier
• Age Recommendation: Suitable for children aged 8 years and above
• Safety Features: Child lock, self-locking door
• Installation: Indoor, well-ventilated area

Product Usage Instructions

1. Safety Information

General Safety Guidelines:

• This appliance is suitable for children aged 8 years and above under supervision.
• Keep children under 3 years away from the appliance unless supervised.
• Avoid letting children or pets near the appliance when the door is open.
• Store washing agents out of reach of children.

2. Daily Use

General Usage Tips:

• Avoid laundry entanglement; use appropriate bags or nets if needed.
• Avoid using the appliance barefoot or with wet hands.
• Avoid covering the appliance during or after operation to allow moisture to evaporate.
• Avoid placing heavy objects or heat sources on top of the appliance.

3. Installation

Installation Guidelines:

• Place the appliance in a well-ventilated area.
• Avoid installing the appliance outdoors or in damp places.
• Ensure the location allows for full door opening.
• Avoid placing the appliance directly on a carpet or close to walls or furniture.

Frequently Asked Questions

• Q: Can children below 3 years use the appliance unsupervised?
  • A: No, children under 3 years should always be supervised around the appliance.
• Q: What should I do if I encounter a water leak near the appliance?
  • A: In case of a water leak, cut off the power supply and allow the machine to dry naturally.

EN

Thank You

EN

Thank you for purchasing a Haier Product.
Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance. Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance. If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass this manual so that the new owner can become familiar with the appliance and safety warnings.
Legend
Warning ­ Important Safety information

General information and tips

Environmental information
Disposal
Help protect the environment and human health. Put the packaging in applicable containers to recycle it. Help to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with this symbol with the household waste. Return the product to your local recycling facility or contact your municipal

WARNING!
of it. Remove the door catch to prevent children and pets to get closed in the appliance.

Safety information

EN

Bef

–

ing safety hints!

WARNING!

Make sure there is no transport damage. Make sure all transport bolts are removed. Remove all packaging and keep out of children´s reach. Handle the appliance always with at least two persons because it
is heavy.

Daily use

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental ca-

pabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved.

Keep away children under 3 years of age from the appliance unless they are constantly supervised.

Children shall not play with the appliance.

Do not let children or pets come close to the appliance when the door is open.

Store washing agents out of reach of children.

–

vent laundry from being entangled. If necessary, use an appropri-

ate bag or net.

Do not touch or use the appliance when barefoot or with wet or damp hands or feet.

Do not cover or encase the appliance during operation or afterwards to allow any moisture or dampness to evaporate.

Do not place heavy objects or sources of heat or damp on top of the appliance.

Do not use or store flammable detergent or dry cleaning agent in close vicinity to the appliance.

Do not use any flammable sprays in close vicinity to the appliance.

Do not wash any garments treated with solvents in the appliance without having dried them previously in the air.

4

EN

1-Safety information

WARNING!
Daily use Do not remove or insert the plug in the presence of flammable
gas. Do not hot wash foam rubber or sponge-like materials. Do not wash any laundry which is polluted with flour. Do not open detergent drawer during any wash cycle. Do not touch the door during the washing process, it gets hot. Do not open the door if the water level is visibly over the porthole. Do not force the door to open. The door is tted with a self-lock
device and will open shortly after the washing procedure is ended.
undertaking any routine maintenance and disconnect the appliance from the electrical supply to save electricity and for safety. Hold the plug, not the cable, when unplugging the appliance. Maintenance / cleaning Make sure children are supervised if they carry out cleaning and maintenance. Disconnect the appliance from the electrical supply before undertaking any routine maintenance. Keep the lower part of the porthole clean and open door and detergent drawer if appliance is not in use to prevent odours. Do not use water spray or steam to clean the appliance. Replace a damaged supply cord only by the manufacturer, its ser-
Do not try to repair the appliance by yourself. In case of repair please contact our customer service.
Remove all foreign objects such as metal objects, chemicals, fragile goods, lighted candles, lighted cigarettes, etc. from the appliance.
Installation
The appliance should be placed in a well-ventilated place. Ensure a location which allows opening the door fully.
Never install the appliance outdoors in a damp place, or in an area which may be prone to water leaks such as under or near a sink unit. In the event of a water leak cut power supply and allow the machine to dry naturally.
5

1-Safety information

EN

WARNING!
Installation
Install or use the appliance only where the temperature is above 5 °C.
Do not place the appliance directly on a carpet, or close to a wall or furniture.
Do not install the appliance in direct sunlight or in the near of heat sources(e.g. stoves, heaters).
Make sure that the electrical information on the rating plate agrees with the power supply. If it does not, contact an electrician.
Do not use multi-plug adapters and extension cables. Make sure only the delivered electric cable and hose set are used. Make sure not to damage the electric cable and the plug. If dam-
aged have it replaced by an electrician. Use a separate earthed socket for the power supply which is easy
accessible after installation. The appliance must be earthed.
no leakage.

Intended use This appliance is intended for washing machine-washable laundry only. Anytime follow the instructions given on the label of each garment label. It is designed exclusively for domestic use inside the house. It is not intended for commercial or industrial use. use may cause hazards and loss of of all warranty and liability claims.
6

EN

Installation

2.1 Preparation
Take the appliance out of the packaging.
keep them out of childrens reach. While opening the package, water drops may be seen on plastic bag and porthole.
This normal phenomenon results from water tests in the factory.
Note: Packaging disposal

Keep all packaging materials out of children´s reach and dispose them in an environmentally friendly manner.

2.2 OPTIONAL: Install noise reduction pads

1.When opening the shrink package,you will find four nnooiissee(rFeigd.u2c- t1io)n. pad s.These ar e used fo r reducing

2. Lay the washing machine down to its side, porthole pointing upwards, bottom side towards op-

2-1

3. Take out the double-sided

naodihseesrievedupcrtoiotencptiavdesfialmndpraesmteoavreotuhned

the bottom the noise reduction pads under the w-

ashing machine cabinet as shown in Figure 3(two

longer pads in position 1 and 3, two shorter pads in

position 2 and 4). Finally set the machine upright again.

2.3 Dismantle the transportation bolts
The transportation bolts are designed for clamping anti-vibration components inside the appliance during transportation to prevent inner damage.

2-2

2-3

1. Remove all 4 bolts on the rear side and take out plastic spacers (Fig. 2-2)(Fig. 2-3).

2. Fill left holes with blanking plugs (Fig. 2-4) (Fig. 2-5).

2-4

2-5

7

2-Installation

EN

Note: Keep in safe place
Keepall partsofthetransportprotectioninasafeplaceforlateruse.Whenevertheap-

2.4 Moving the appliance

Ifthemachineistobemovedtoadistantlocation,replacethetransportation bolts removed before installation to prevent damage: The assembly takes place in reverse order.

2-6

2.5 Aligning the appliance Adjustallfeet(Fig.2-6) to achieve acomplete le vel position. This will minimize vibrations and thus noise duringuse.Itwillalsoreduce wearandtear.Werecommendtouseaspiritlevelforadjustment.Floorshould be as stable and flat as possible.

1. Loose the locknut (1) by using a wrench. 2. Adjust the high by turning the foot (2). 3. Tighten lock ut (1) against the housing.

WARNING!

Mini Washer can not be placed directly on the washing machine and dryer.

8

EN

2-Installation

2.6 Drain Water Connection
Fix the water drain hose properly to the piping. The hose has to reach at one point a height between 80 to 100 cm above the appliance bottom line! If possible keep always drain

WARNING!

Use only the supplied hose set for the connection. Never reuse old hose sets! Only connect to cold water supply. Before connection, check whether the water is clean and clear.

Following connections are possible:

2-7

2-8

2.6.1 Drain hose to sink

Hang the drain hose with the U-support over the

edge of a sink with adequate size (Fig. 2-7).

ping.

80-100 cm

2.6.2 Drain hose to waste water connection
The internal diameter of the stand pipe with vent-hole must be minimum 40 mm.
Putthe d rain hose fo r 80- 100 mmin the wastewater pipe.
(Fig. 2-8).

2-9 2.6.3 Drain hose to sink connection
The junction must lie above the siphon. A spigot connection is usually closed by a pad (A).
That must be removed to prevent any disfunction (Fig. 2-9).
Secure the drain hose with a clamp.

CAUTION!
The drain hose should not be submerged in water and should be securely xed and leak-free. If the drain hose is placed on the ground or if the pipe is at a height of less than 80 cm, the washing machine will continuously drain while being lled (self-siphoning).
Drain hose is not to be extended. If necessary contact after sales service.

9

2-Installation

2-10

2-11

EN
2.7 Fresh Water Connection Make sure that the gaskets are inserted. 1. Connect the water inlet hose with the angled
end to the appliance (Fig. 2-10). Tighten the screw joint by hand. 2. The other end connect to a water tap with a 3/4″ thread (Fig. 2-11)

2.8 Electrical Connection
2-12 Before each connection check if: power supply, socket and fusing are appropriate to the rating plate. the power socket is earthed and no multi-plug or extension are used. the power plug and socket are strictly according.
Put the plug into the socket (Fig. 2-12).
WARNING!
dry and leack free!
Take care these parts are never to be crushed, kinked, or twisted. If the supply cord is damaged, it must be replaced by the service agent (see warranty
card) in order to avoid a hazard.

10

EN

Product description

Note:

3.1 Picture of appliance Front (Fig. 3-1):

12

3

–

Rear side (Fig. 3-2):

3-1

3-2

1 23 4 5 6

T4

S1

T3

4

S2 T1

S3
T2 S4

5

1 Detergent / Softener drawer
2 Work top
3 Control Panel

6
4 Washer door 5 Service flap 6 Adjustable feet

1 Transportation bolts (T1-T4) 2 Back cover 3 Back cover screws (S1-S4) 4 Power cord 5 Water inlet valve 6 Drain hose

3.2 Accessories Check the accessories and literature in accordance with this list (Fig. 3-3):
3-3

Inlet hose- 5 Blanking assembly plugs

Drain hose bracket

Noise reduction pads

Warranty 10 YEAR PARTS Simple operation General Energy

card

GUARANTEE explanation

safety rules label

11

Control panel

4-1

1

2

Temp. Speed Delay

3

4 56

40-60

Cotton20°C Cotto1n5DelicateQuick

1 Detergent/softener drawer

2 Function buttons

4 Programme selection buttons 5 “Start/Pause” button

3 Display 6 “Power” button

4-2

4.1 Power

Press the “Power” button to start the machine or shut down the machine(Fig. 4-2).

4-3

15

4.2 Programme
Select programme by pressing the selection buttons (<>), its default settings will be displayed(Fig. 4-3).

4-4
12

4.3 Display
The display (Fig.4-4) shows following information: °Washing time °End time delay °Anti-crease °Error codes and service information °Locking the door °Child lock

4-Cont rol panel

4.4 Detergent/Softener drawer Open dispenser drawer, the following components can be seen(Fig.4-5) 1:compartment for powder or liquid detergent. 2:detergent flap slector, lift it up for powder detergent, keep it down for liquid detergent. 3:compartment for softener. 4:lock tab, press it down to pull out dispenser drawer. the recommendation on the type of the detergents is suitable for the various washing temperatures. Please refer to the manual of detergent(P15).
4.5 Function buttons The function buttons (Fig.4-6) enable additional options in the selected programme before the programme starts.The related indicators are displayed. By switching off the appliance or setting up a new programme,all options are disabled. If a button has multiple options, the desired option can be selected by pressing the button sequentially.

4 2 1

4-5
3

4-6
Temp. Speed Delay

Note: Factory settings
To get the best results in each programme, Haier has well defined specific default settings. If there is no special requirement, default settings are recommended.

4.5.1 Function button “Delay” Press this button (Fig.4-7) to start the programme with a delay.End
time delay could be increased in steps of 30 minutes from 0-24h
(End time will be longer than original programme time). For example display off 6:30 means end of programme cycle will be in 6 hours and
30 minutes.Press “Start/Pause” button to activate the time delay.

4-7
Delay

Note: Liquid detergent

If using liquid detergent, it is not recommended to activate the end time delay.

4.5.2 Function button ” Temp.”

Press this button(Fig.4-8) to change the washing temperature

of the programme. If no value is illuminated (the display “–“°C)

the water will not be heated.

Temp.

4.5.3 Function button ” Speed”
Press this button (Fig.4-9) to change or deselect the spin
of the programme. If no value is illuminated the display “” the laundry will not spin.

4-8 4-9
13

4-Cont rol panel

EN

4-10

4.5.4 Function button ” Anti-crease”

Press this button (Fig.4-10) . to select this function and the

corresponding icon will light up. Press again or select another

programme this feature will be cancelled.

Under “Anti-crease” function, the max spin will be set to 800 rpm.

4-11

After spin, the washing machine keeps intermittent operation to shake off the clothes to prevent mildew and odor, reduce wrinkles

and make them smoother after hanging up.

During operation, the LED display will show “-” “–“” —“” —-“, and

this phase lasts for 12 hours at most, users can press “Start/Pause”

to terminate the programme at any time.

4-12

4.5.5 Function button ” Extra Rinse”

Press this button (Fig.4-11) .to rinse the laundry more intense with

fresh water. This is recommended for people with sensitive skin.

By pressing the button several times zero to three additional cycles

can be selected. They appear in the display with P–0/P–1/P-2/P–3. Different programme options are different.

4.5.6 “Start/Pause” button

Press this button (Fig.4-12) gently to start or interrupt the currently

displayed programme.

4-13

4.6 Child lock

Choosing a programme and then start,touch button”Temp.” and

“Delay” for 3 seconds simultaneously to block all panel elements

against activation, panel display .

For unlocking please touch again this two buttons. The child lock

indication lights up when the child lock works. Feature is optional

when the machine is running.

The display shows” ” (Fig.4-13) if a button is pressed when the

child lock is activated, nothing will change.

The acoustic signal can be selected if necessary ; see DALIY USE (P21 7.13)
Note: The procedure to check the number of cycles that the machine has run.
Procedure: under standby mode, select “Cotton” programme first,then press “Temp.” and “Speed” at the same time, it will display the number of running cycles for 2 seconds, and then back to standby interface. The cumulativer running cycles will add 1 after the programme ends. The running cycles will be displayed in hexadecimal if it is over 9999.
14

Preset Delay Temp. Speed Anti-crease Extra Rinse

EN

Programmes

12
· Yes, º Optional, / No
Max. load Temperature

in kg

in °C 1)

Detergent compartment for: 1 Detergent 2 Softener or care product
3

Preset spin
speed in rpm

Function

Programme

selectable range

1 2 Fabrics type

Eco 40-60

5.0

/

Cotton 20°C 5.0

/

/ /

· ·

º º

/ Cotton

/

º/ / / /

1000 º / º º º

Rapid 15

1.5

Mix and color 5.0

• to 40 · º Cotton/Synthetics 1000 º º º º º to 60 30 · º Lightly soiled mixed 1000 º º º º º

laundry of cotton

and synthetics

Cotton Synthetics Delicate

5.0

• to 90 40 · º Cotton

5.0 1.5

• to 60 * to 30

40 30

··

º º

Synthetics Delicate laundry

1200 º º º º º
1200 º º º º º 600 º º º / º

and silk

Sport Hand wash

1.5 1.5

· to 40 20 · to 40 *

º Cotton/Synthetics º Machine-washable

800 800

ººººº ººº/ º

fabric made of wool

Hygiene + Jeans

5.0

• to 90

60

·

º

or with wool content Cotton

1000

º

º

º

ºº

5.0

• to 60 30 · º Jeans

1000 º º º º º

Drain + spin

5.0

/

/ / / All fabrics

1000 / / º º º

• Water is not heated up. 1) Choose 90°C wash tempera ture on ly for special hygienic requirements.

2. Reduce detergent amount because programme duration is short. The design and specifications are subject to change without notice for quality improvement purposes.

15

Consumption

EN

Scan QR code on energy label for energy consumption information. The actual energy consumption may differ from the declared one according to local
conditions.

Note: Auto Weight
The appliance is equipped with loading recognition. At low loading, energy, water and washing time will be reduced automatically in some programmes. The display default time may vary depending on the load weight.

16

EN

Daily use

7.1 Power supply
Connect the washing machine to a power supply (220V to 240V~/50Hz; Fig. 7-1). Please refer also to section INSTALLATION (see P10).
7.2 Water connection
Before connecting check the cleanliness and clarity of the water inlet.
Turn on the tap (Fig.7-2).

7-1

7-2

Note: Tightness
Before use check for leakage in the joints between the tap and the inlet hose by turning on the tap.

7.3 Preparing laundry

Sort out clothes according to fabric (cotton, syn-

7-3

thetics, wool or silk etc.) and how dirty they are

(Fig. 7-3). Pay attention to the care labelling of w- –

ashing labels.

Separate white clothes from coloured ones.

they fade or run.
Empty pockets (keys, coins, etc.) and remove harder decorative objects (e.g. brooches).

into a wash bag to care for this delicate laundry
(hand or dry cleaning would be better).
Close zippers, velco fastener and hooks, make sure the buttons are sewn on tightly.
hem, delicate underwear (Dessous) and small
items such as socks, belts, bras, etc. in a wash
bag.
Unfold large pieces of fabric such as bed sheets, bedspreads etc.
Turn jeans and printed, decorated or color-intensive textiles inside out; possibly wash separately.

CAUTION!
Non-textile, as well as small, loose or sharp-edged items may cause malfunctions and damage of clothes and appliance.

17

7-Daily use

EN

Care chart
Washing Washable up to 95°C normal process Washable up to 40°C normal process Washable up to 30°C normal process Wash by hand max. 40°C
Bleaching Any bleaching allowed
Drying Tumble drying possible normal temperature

Washable up to 60°C normal process Washable up to 40°C mild process Washable up to 30°C mild process Do not wash
Only oxygen/ non-chlorine
Tumble drying possible lower temperature

Washable up to 60°C mild process Washable up to 40°C very mild process Washable up to 30°C very mild process
Do not bleach
Do not tumble dry

Line drying

Flat drying

Ironing Iron at a maximum temperature up to 200 °C Do not iron
Professional Textile Care
Dry cleaning in tetrachloroethene Professional wet clean

Iron at a medial temperature up to 150°C
Dry cleaning in hydrocarbons Do not professional wet clean

Iron at a low temperature up to 110 °C; without steam (steam ironing may cause irreversible damage)
Do not dry clean

7.4 Loading the appliance
Put in the laundry piece by piece.
thumb for maximum load: Keep six inches between load and drum top. Close the door carefully. Make sure that no pieces of laundry are pinched.

18

EN

7-Daily use

7.5 Selecting detergent

Use only machine wash approved detergent.

See tips for countertop detergent stickers. Do not use dry cleaning agents such as trichloroethylene and similar products.

Choose the best detergent

Programme Eco 40-60 Cotton 20°C Rapid 15 Mix and color Cotton Synthetics Delicate
Sport Hand wash Hygiene + Jeans Drain + spin

Universal L/P L/P L L L/P –
L/P –
–

Kind of detergent

Colour

Delicate

L/P

–

L/P

–

L

–

L/P

–

L/P

–

L/P

–

–

L/P

–

L/P

–

L/P

L/P

–

L

–

–

–

Special L/P
L/P L/P –
L/P –

Softener o o o o o o o
o o
o o

L = gel-/liquid detergent P = powder detergent O = optional @ = no If using liquid detergent, it is not recommended to activate the time delay.

We recomment by using: Laundry powder:

20°C to 90°C* (best use: 40-60°C)

Color detergent:

20°C to 60°C (best use: 30-60°C)

Wool/delicate detergent: 20°C to 30°C (best use: 20-30°C)

• Choose 90 °C wash temperature only for special hygienic requirements. If you choose the water temperature 60°C or above, we would like to advise you to use
  less detergent. Please kindly use the special disinfectant, which is suitable for cotton or synthetic cloth. * It is better to use less or free suds detergent powder.
• Please add softener according to the weight of the clothes. 19

7-Daily use
7-4

EN
7.6 Adding detergent 1. Slide out the detergent drawer. 2. Put the required chemicals into corresponding
compartments (Fig. 7-4), 3. Push back the drawer gently.

Note:

Remove detergent residues before next wash cycle from the detergent drawer. Do not overuse detergent or softener. Please follow the instruction on the detergent package. Concentrated liquid detergent should be diluted before adding. Do not use liquid detergent if function “Delay” is selected. Carefully choose the programme settings according to the care symbols on all laun-
dry labels and according to the programme table.

7-5

7.7 Turn on the power

Press the “Power” button to start the machine or shut down the machine(Fig.7-5)

7-6

7.8 Select a programme

To get the best washing results, select a programme which fits the degree of soiling and sort of laundry type. Press the buttons of programme selection to selcet the right programme. the default settings are displayed (Fig. 7-6).Press the “Speed” button + “Extra Rinse” button at the same time for about 3 seconds to enter the “Spin” programme.

Note: Odour removal

Before first use we recommended to run programme “Cotton+90°C+600rpm” with

no load and small amount of detergent in washing agent compartment or special

machine cleaner to remove possibly corruptive residues

7-7

7.9 Add individual selections
Select required options and settings (Fig. 7-7); refer to Control Panel.

20

EN

7-Daily use

7.10 Start wash programme

Press “Start/Pause” button (Fig. 7-8) to start.

7-8

Appliance operates according to present settings.

Changes are only possible by cancelling the programme.

7.11 Interrupt / Switch wash programme

To interrupt a running programme press gently “Start/Pause”. Press it again to resume operation. To cancel a running programme and all its individual settings:

1. Press “Start/Pause” button to interrupt the running programme. 2. Select a new programme and start it

7.12 After washing

Note: Door lock

For safety reasons the door is locked partially during the washing cycle. It is only pos sible to open the door at the end of the programme or after the programme was can

celled correctly In case of high water level, high water temperature and during spinning it is not pos

sible to open the door;

is displayed.

1. At programme cycle end 2.

is displayed.

3. Remove laundry as soon as possible to go easy on it and to prevent more wrinkling.

5. Unplug the power cable.

6. Open the door to prevent formation of moisture and odours. Let it open while not used.

7. Small clothes are easy to stick to the wall after high-speed swing drying, please do not

omit when opening the door to pick up clothes.

Note: Standby-mode / energy -saving mode
The switched on appliance will go into standby-mode if it will not be activated within 2 minutes before starting the programme or at the end of programme. The display switches off. This save energy.

7.13 Activate or deactivate the buzzer

The acousitc signal can be deselected if necessary:

1.Switch on the appliance.

2.Select the “Rapid 15” programme.

3.Press the “Delay” button and “Extra Rinse” button at the same time for about 3 seconds.

”

” will be displayed and the buzzer will be turned on.

Press these two buttons at the same time again to turn off the buzzer,”

” will be

displayed.

21

8-Eco-friendly washing

EN

Environmentally responsible use
To achieve best use of energy, water, detergent and time you should use the recommended maximum load size.
Do not overload (hand width clearance above laundry). For slightly soiled laundry select the Rapid 15 programme. Apply exact dosages of each washing agent. Choose the lowest adequate washing temperature-modern detergents are effi-
ciently cleaning below 60°C.
Raise default settings only due to heavy staining.

22

EN

Care and cleaning

9.1 Cleaning the detergent drawer
Take always care there are no detergent residues. Clean the drawer regularly (Fig. 9-1): 1. Pull out the drawer until it stops. 2. Press the release button and remove the drawer. 3. Wipe the inside of the sink clean with a towel. 4. Flush the drawer with water until it is cle. an and
insert the drawer back in the appliance

9.2 Cleaning the machine
Unplug the machine during cleaning and maintenance.
Use a soft cloth with soap liquid to clean the machine case (Fig. 9-2) and rubber components.
Do not use organic chemicals or corrosive solvents.
Turn on the tap to see if it leaks. 9.3 Water inlet valve and inlet valve filter
To prevent blockage of water supply by solid substan-

supply.

Unscrew the water inlet hose at the back (Fig.

9-3) of the appliance as well as on the tap.

(Fig. 9-4).

9.4 Cleaning the drum

2 1
9-3

9-1 9-2 9-4 9-5

9

After the procedure, open the door, use a towel to clean the stains and foam around the gasket, and keep the inside and outside of the gasket clean. (Fig. 9-5)
23

9-Care and cleaning

EN

9-6

9-7

9-8

9-9

9-10

9-11

9-12

9-13

9.5 Long periods of disuse

If the appliance is left idle for a longer period:

1. Pull out the electrical plug (Fig. 9-6).

9

3. Open the door to prevent formation of moisture

and odours. Let door open while not used.

Before next usage check carefully power cord, water inlet and drain hose. Make sure everything is properly installed and without leakage.

9

for instance if the appliance: Doesn´t drain the water. Doesn´t spin. Cause unusual noise while running.
WARNING!

hot! Before any action please ensure water has cooled down.

9

2. Push and open service flap (Fig. 9-9).

3. Provide a flat container to catch leach water

(Fig. 9-10). There could be bigger amounts!

4. Pull the drainhose out and hold its end above the container (Fig. 9-10).

5. Take the sealing plug out of the drainhose (Fig. 9-10).

6. After complete drainage close drainhose (Fig. 9-11). and push it back into the machine.

7. Unscrew and remove counter clockwise the pump 9

8. Remove contaminants and dirt (Fig. 9-13).

24

EN

9-Care and cleaning

9. (Fig. 9-14).

9-14

9-15

10. After cleaning, reinstall the handle and tighten it

until it does not move. At this time, the handle is in

vertical state (Fig. 9-15).

11. Close service flap.

CAUTION!
can escape.

25

Troubleshooting

EN

of a problem please check all shown possibilities and follow below instructions before you
WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
improper repairs can cause considerable consequential damages.
A damaged power cable should only be replaced by the manufacturer, its service
For the safety of the end-user ,self-repair or non-professional repair is not recommended. Please contact an after sales service.

10.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No measures must be performed.

Code

Message The remaining wash cycle time will be 1 hour and 25 minutes.

The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 minutes.

Door is closed because of high water level, high water temperature or spinning cycle. The buzzer is deactivated. The buzzer is activated. The function keys is closed.The programme changing is invalid.

10.2 Troubleshooting with display code

Problem

Cause

Solution

· Drainage error, water is not fully drained ·

within 6 minutes.

· Check drain hose installation.

· Lock error.

· Shut the door properly.

· In the main washing water inlet stage and · Make sure that tap is fully opened and water

rinsing water inlet stage, the water does not pressure is normal.

reach the set level after the set time · Drain hose is self-syphoning.

· Check drain hose installation.

· Water protective level error.

· Contact the After sales service.

26

EN

10-Troubleshooting

Problem
/ or

Cause
Temperature sensor error. Heating error. Motor error. Water level sensor error. Abnormal communication error.

Solution Contact the After sales service. Contact the After sales service. Contact the After sales service. Contact the After sales service.
Contact the After sales service.

10.3 Troubleshooting without display code

Problem

Cause

Solution

Washing machine fails to operate.
Washing machine water.
Machine is draining
Drainage failure.
Strong vibration while spinning.
Operation stops before completing wash cycle.

Programme is not yet started. Door is not properly closed. Machine has not been switched on. Power failure. Child lock is activated.
No water. Inlet hose is kinked. Water pressure is less than 0.03 MPa. Door is not properly closed. Water supply failure.
Height of drain hose is below 80 cm. Drain hose end could reach into water.
Drain hose is blocked.
Drain hose end is higher than 100 cm above floor level.
Not all transportation bolts have been removed. Appliance has no solid position.
Machine is overloaded.
Water or electric failure.

Check programme and start it. Close the door properly. Switch the machine on. Check power supply. Deactivate child lock.
Check water tap. Check inlet hose. Check water pressure.
Close the door properly. Ensure the water supply.
Make sure that height of drain hose is between 80 to 100 cm Make sure the drain hose is not in water.
Unblock drain hose.
Make sure that drain hose is properly installed.
Removeall transportation bolts.
Ensure solid ground and a evelled position. Check load weight and balance.
Check power and water supply.

Operation stops for a period of time.

Appliance displays error code. Problem due to load pattern. Programme performs soaking cycle.

Consider display codes. Reduce or adjust load. Cancel programme and restart.

27

10-Troubleshooting

EN

Problem

Cause

Solution

Excessive foam detergent drawer. Automatic adjustment of washing time. Spinning fails.
washing result.
Washing powder residues are on the laundry.
Laundry has grey patches.

· Detergent is not a appropriate. · Excessive use of detergent. · Washing programme duration will
be adjusted.
·
· Degree of pollution does not agree with selected programme
· Detergent quantitiy was not suf-
· Maximum load has been exceeded.
· Laundry was unevenly distributed in the drum.
· Insoluble particles of detergent can remain as white spots on the laundry.
· Caused by fats such as oils, creams or ointments.

· Check detergent recommendations.
· Reduce amount of detergent.
· This is normal and doesn`t affect functionality.
· Check machine load and laundry and run a spinning programme again.
· Select an other programme. · Choose the detergent acc.
to the degree of pollution and according to manufacture specifications · Reduce loading. · Loose the laundry.
· Perform extra rinse. · Try to brush the points from the
dry laundry. · Choose an other detergent.
· Pretreat the laundry with a special cleaner.

Note: Foam formation

If too much foam is inspected during spin cycle, motor stops and drain pump will be activated for 90 seconds. If that elimination of foam fails up to 3 times, programme ends without spinning.

ance, disconnect the power supply and contact the customer service.

10.4 In case of power failure The current programme and its setting will be saved.

10-1

When power supply is restored operation will be re-

sumed.

If a power failure cuts an operating wash programme door opening is mechanically blocked. To get out any laundry water level should not be seen in the glassy

A

parts.
When the washing machine in a safe state (under the water level below the window along a certain distance, barrel temperature below 55 ¥, the inner barrel did not turn), may unlock the doors of the machine operation.
28

EN 11.2 Additional technical data
Voltage in V Current in A Max. power in W Water pressure in MPa Net weight in kg 11.3 Product dimensions
”

11-Technical data
CW50-BP12307-S 220-240 V~/50Hz
10 1800 0.03P 1
47

‘ &

$

%

FRONT VIEW

WALL

TOP VIEW

PRODUCT DIM ENSIONS

CW50-BP12307-S

A Overall height of product mm

700

B Overall width of product mm

510

C Overall depth of product
(To main control board size) mm

448

D Overall depth of product mm

490

E Depth of door open mm

869

F Minimum door clearance to adjacent wall mm

1 40

Note: The exact height of your washer is dependent on how far the feet are extended from

the base of the machine. The space where you install your washer needs to be at least

40mm wider and 20mm deeper than its dimensions.

11.4 Standards and Directives
ThisproductmeetstherequirementsofallapplicableECdirectiveswiththecorresponding harmonised standards, which provide for CE marking.

29

Customer service

EN

We recommend our Candy Customer Service and the use of original spare parts, and the minimum period during which the spare parts for the household washing machine is 10 years.
your local dealer.
and FAQs and where you can activate the service claim.

To contact our Service, ensure that you have the following data available. The information can be found on the rating plate.

Model ____

Serial No. _____

Also check the Warranty Card supplied with the product in case of warranty. For general business enquiries please contact our Customer Care Centre according to Warranty Card.

30

– 2023.06 –

– CW50-BP12307-S –

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>