Multikomplex S-KFHE4 Evaporator Activated Carbon Filter Set Installation Guide
- June 1, 2024
- Multikomplex
Table of Contents
Multikomplex S-KFHE4 Evaporator Activated Carbon Filter Set
TECHNICAL INFORMATION
WARNINGS
The appliance is not intended for use by young children and inexperienced or
infirm persons without supervision.+
USES
The appliance is designed to re-circulate and purify air flow into the room where it is mounted.
INSTALLATION
- Fit a false ceiling with an opening of the following sizes: 550mm X 320 mm X h=150mm
- Remove the central part of the blower by applying traction, as shown in fig. 1.
- Remove the charcoal filters (fig. 1)
- The product is assembled with the air inlet rectangular (220x90mm). If you need to use the round inlet, you can do as indicated here below.
- Remove the plastic side flange and put the metal plug supplied.
- Remove the metal plug from top of the appliance and install the plastic round flange. (fig. 2)
- Perform the four holes in the solid ceiling using a helical tip with a diameter of 8mm. (fig. 3)
- We suggest to use the appliance to track the exact point to drill, with a pencil.
- Insert the plastic inserts supplied into the holes made.
- Bring the product near the false ceiling and connect the air inlet duct.
- Otherwise, it is possible to install the product by using the four hole in the white frame, see picture 4. Four suitable screws are supplied.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of the product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. This appliance is marked according to the European directive 2012/19/EC on waste electrical and electronic equipment (WEEE).
Specifications
- Model: SS-KKFHE44
- Dimensions: 550mm X 320mm X 150mm
- Air Inlet Size: 220mm x 90mm
FAQ
What should I do if I need to switch to a round air inlet?
If you need to switch to a round air inlet, remove the plastic side flange,
replace it with the metal plug supplied, remove the metal plug from the top of
the appliance, and install the plastic round flange as shown in figure 2 of
the manual.
How often should I clean the appliance?
We recommend cleaning the appliance regularly using tepid water and mild
detergents to maintain optimal performance. Additionally, replace charcoal
filters as needed for efficient air purification.