CEILING SAM Tote Slide Pro Storage System Instruction Manual

CEILING SAM Tote Slide Pro Storage System

Product Information

Specifications:

• Product Name: Tote Slid e Pro Storage System
• Maximum Weight Capacity: 150 lbs per row, evenly distributed
• Warranty: Lifetime Limited Warranty

Product Usage Instructions

Installation:

• We highly recommend watching the installation video before beginning the installation process. Ensure to read through the entire installation instructions available at CeilingSAM.com/installation before starting.
• If any part is missing, please do not return the unit to the seller. Instead, contact info@ceilingstorageandmore.com for assistance.

Warranty Information:
The CeilingSAM Tote Slide Pro Storage System is covered by a Lifetime Limited Warranty against defects in material and workmanship. The warranty includes repair or replacement at the
discretion of CeilingSAM. Ensure that the weight limit of 150 lbs per row is not exceeded and follow the installation instructions carefully.
Maintenance:
Check and tighten all hardware and fasteners at least annually. Do not install more than two Heavy Duty Tote Slide Pro Storage systems on any two ceiling rafters, trusses, or ceiling studs.

FAQ :

• Q: What is the weight capacity of the Tote Slide Pro Storage System?
  A: The maximum weight supported per row is 150 lbs, evenly distributed.

• Q: How can I claim warranty service?
  A: Contact CeilingSAM at 833-255-1122 before returning the unit to the seller. Ensure you have the original receipt or proof of purchase for warranty claims.

• Q: Are there any limitations to the warranty coverage?
  A: The warranty covers defects in materials or workmanship only. It does not include damage due to corrosion, misuse, abuse, faulty installation, or lack of care.

Tote slide pro storage SYSTEM

We highly recommend watching our installation video before beginning your installation

INSTALLATION INSTRUCTIONS
CeilingSAM.com/installation

IMPORTANT: READ THROUGH ENTIRE INSTRUCTIONS BEFORE BEGINNING ANY INSTALLATION

Tote SIide Storage System
MISSING A PART? There is no need to return this unit to the seller. Please email: info@ceilingstorageandmore.com

• We appreciate your purchase of the CeilingSAM Tote Slide Pro Storage System. CeilingSAM has made every effort to supply a quality product that ensures a lifetime of trouble-free service. In the event that you encounter any urgent problems, please call our toll-free number at 833-255-1122 BEFORE RETURNING THE UNIT TO THE SELLER.

CeilingSAM Heavy Duty Tote Slide Lifetime Limited Warranty

• CeilingSAM warrants this ceiling storage system against defects in the material and workmanship for the life of the product. CeilingSAM agrees to either repair the product or replace it at the sole discretion of CeilingSAM. This warranty does not include the costs associated with the physical installation, removal, or return of the CeilingSAM Tote Slide Storage System.

• This warranty is valid and enforceable provided that the maximum weight supported by each Heavy Duty Tote Slide Storage System does not exceed 150 lbs per row, evenly distributed. The customer, dealer, and/or installer releases CeilingSAM of all claims, which includes the CeilingSAM ceiling unit and the structure it is attached to.

• This unit must also be installed according to the manufacturer’s instructions (both written and/or by video). At no time should you install more than two Heavy Duty Tote Slide Pro Storage systems on any two ceiling rafters, trusses, or ceiling studs. All hardware and fasteners must be checked and tightened at least annually.

• Only the original purchaser of this product is extended this warranty. No warranty work will be provided under this warranty without purchaser’s original receipt or other proof of the date of the original purchase acceptable to CeilingSAM. There are NO other warranties expressed or implied except those stated herein as required by applicable law.

• This CeilingSAM limited warranty covers product failure due to defects in materials or workmanship ONLY! It does not cover corrosion, rust or discoloration of it components, or product failure due to misuse, abuse, faulty
  installation, alteration, lack of reasonable care, or any other failure not related to the defects in materials or workman-ship.

• There are NO other warranties expressed or implied except those stated herein as required by applicable law.
  CEILING SAM SHALL NOT BE LIABLE FOR INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF

• THIS WARRANTY. ALL IMPLIED WARRANTIES, IF ANY, INCLUDING IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO

• THE DURATION OF THIS WARRANTY.

• Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above exclusions or limitation may not apply to you. No other warranty, written or verbal, will be honored for this product. This warranty gives you the specific legal right and you may also have other rights that vary from state to state.

• CeilingSAM is not responsible for damages of merchandise in transit. Repaired or replaced products shall be subject to the terms of this warranty, to be inspected by CeilingSAM prior to return shipment. Damages incurred during transit should be reported at once to the carrier and a claim should be filed with them.

• CeilingSAM – www.CeilingSAM.com
  Phoenix, AZ 85281

TOte Slide pro Storage System

REQUIRED TOOLS

STEP 1: UNBOX YOUR TOTE SLIDE STORAGE SYSTEM

Make sure all parts are included

Parts included: TOte Slide pro

PARTS INCLUDED IN YOUR TOTE SLIDE STORAGE SYSTEM:

CONFIGURATION OPTIONS

tote slide pro

MOUNT your support rails

• STEP 2: MOUNT YOUR SUPPORT RAILS
  • Use a Stud Finder to locate the Ceiling Joists.
  • Pre-drill at the very center of the joists with a 3/16” Drill Bit before inserting the Lag Screws.

• * Parallel with the ceiling joists: Mount two support rails 48” apart, using 4 Lag Screws with Washers.

  • Perpendicular to the ceiling joists: Mount two support rails 48” apart, using 4 Lag Screws with Washers.

ASSEMBLE AND MOUNT YOUR CHANNEL RAILS

STEP 3: ASSEMBLE AND MOUNT YOUR CHANNEL RAILS

• Connect the Channel Rails using Channel Rail Connectors.
• Fasten the Hex Bolts using a 1/2” Socket.
• Insert the Hex Bolts into the Channel Rails 48” apart, and loosely hand-tighten the Slide Nuts. Ensure the teeth are facing down.
• Mount the Channel Rails by rotating the Slide Nuts 90 degrees inside the Support Rails.

FASTEN YOUR CHANNEL RAILS

STEP 4: FASTEN YOUR CHANNEL RAILS

• Fasten the first Channel Rail using a 1/2” Socket.
• Use an empty Tote to align the second Channel Rail. Ensure a snug fit.

• Ensure the Channel Rails are in-line by measuring from the Support Rail to the tip of the Channel Rails. Adjust if necessary.
• Fasten the second Channel Rail using a 1/2” Socket.

LOADING

STEP 5: LOADING

• We recommend no more than 35 lbs. per Tote. Each row has a load capacity of 150 lbs.
• ONLY use Totes with a thick reinforced “lip”.

• The standard 27-gallon Totes require ~18” of clearance from the ceiling.
• The standard 17-gallon Totes require ~15” of clearance from the ceiling.

extra storage

•  To maximize your storage, leave a 24” gap between your Support Rails.
•  Organize your totes in either direction.

• If you combine 2 systems, you will get an extra row of storage.
• The Tote Slide Pro holds 450 lbs. of distributed weight.

extra storage

STEP 6: Extra Space

• Purchase Hooks on our website for  additional storage!
• Organize bikes, ladders, and more!

YOUR INSTALLATION IS NOW COMPLETE! Please visit our website for more information: www.CeilingSAM.com

NEED MORE STORAGE?

CHECK OUT OUR OTHER PRODUCTS

MANUFACTURED 100% IN THE U.S.A

References

• Ceiling SAM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>