COOPERS OF STORTFORD K812 Plug in Mini Heater User Manual

June 3, 2024
Coopers OF STORTFORD

STORTFORD K812 Plug-in Mini Heater
User Manual


K812 Plug-in Mini Heater

Dimensions (H) 17.8 x (W) 9.6 x (D) 11cm

  • QUICK AND EASY TO USE
  • PORTABLE
  • INSTANT HEAT USING ANY PLUG SOCKET
  • SAVE MONEY BY HEATING ONLY THE SPACE YOU ARE IN
  • EASY TO USE
  • REMOTE CONTROL
  • 2 SPEED SETTINGS – LOW AND HIGH
  • 1-12 HOUR TIMER
  • ADJUSTABLE THERMOSTAT 15-32 DEGREES C
  • FREES UP FLOOR SPACE
  • NO MESSY WIRES
  • POWERFUL 500W
  • LED THERMOSTAT SCREEN
    Power Details: 220-240V 500W  50Hz-60Hz

DESIGNED FOR IN-WALL SOCKET USE ONLY
THIS PRODUCT IS ONLY SUITABLE FOR WELL-INSULATED SPACES OR OCCASIONAL USE.
WARNING! DO NOT COVER WHEN IN USE.
CAUTION: To reduce the risk of fire or electric shock connect directly to an earthed three-prong wall socket.
WARNING: To reduce the risk of fire or electric shock do not use with an extension cord.
WARNING: POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO.
WARNING: The heater must not be used if the glass panels are damaged.
WARNING: The heater is not equipped with a device to control the room temperature.
THIS PLUG-IN MINI HEATER CAN NOT BE USED WITH AN RCD (RESIDUAL CURRENT DEVICE) PLUG.

IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this heater.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, and electric shock. And injury to persons, including the following:

  • THIS HEATER MUST BE PLUGGED INTO A 220-240V, 15 AM (OR MORE) CIRCUIT OF ITS OWN. DO NOT PLUG ANYTHING ELSE INTO THE SAME CIRCUIT. IF UNSURE IF YOUR HOME MEETS THE SPECIFICATION,

Plug in Mini Heater

Please read and retain these instructions for future reference.
CONSULT A QUALIFIED ELECTRICIAN PRIOR TO USE. RISK OF FIRE, OVERHEATING, MALFUNCTION, PROPERTY DAMAGE, INJURY OR EVEN DEATH MAY RESULT IF NOT ADHERED TO.

  • CONNECT TO A PROPER OUTLET ONLY. DO NOT CONNECT THE HEATER TO EXTENSION CORDS, SURGE PROTECTORS, TIMERS, DIRECT BREAKERS, OR AN OUTLET WITH OTHER APPLIANCES CONNECTED TO THE SAME OUTLET. RISK OF FIRE, OVERHEATING, MALFUNCTION, PROPERTY DAMAGE, INJURY, OR EVEN DEATH MAY RESULT IF NOT ADHERED TO.
  • THIS HEATER IS HOT WHEN IN USE. TO AVOID BURNS, DO NOT LET BARE SKIN TOUCH HOT SURFACES.
  • KEEP COMBUSTIBLE MATERIALS, SUCH AS FURNITURE, PILLOWS, BEDDING, PAPERS, CLOTHES, AND CURTAINS AT LEAST 1M FROM THE FRONT OF THE HEATER AND KEEP THEM AWAY FROM THE SIDES AND REAR OF THE HEATER.
  • EXTREME CAUTION IS NECESSARY WHEN ANY HEATER IS USED BY OR NEAR CHILDREN, INVALIDS, OR PETS. DO NOT LEAVE THE HEATER RUNNING UNATTENDED.
  • ALWAYS UNPLUG THE HEATER WHEN NOT IN USE.
  • DO NOT OPERATE ANY HEATER WITH A DAMAGED PLUG OR AFTER THE HEATER MALFUNCTIONS, HAS BEEN DROPPED, OR IS DAMAGED IN ANY MANNER. DISCARD THE HEATER, OR RETURN TO THE AUTHORIZED SERVICE FACILITY FOR EXAMINATION AND/OR REPAIR.
  • DO NOT USE OUTDOORS. EXPOSURE TO OUTDOOR ELEMENTS SUCH AS RAIN, SNOW, SUN, WIND, OR EXTREME TEMPERATURES MAY CAUSE THE HEATER TO BECOME A SAFETY HAZARD.
  • THIS HEATER IS NOT INTENDED FOR USE IN BATHROOMS, LAUNDRY AREAS AND SIMILAR INDOOR LOCATIONS. THIS HEATER IS NOT INTENDED FOR USE IN ANY LOCATIONS THAT USE RCD OUTLETS.
  • NEVER PLACE THE HEATER WHERE IT MAY FALL INTO A BATHTUB OR OTHER WATER RECEPTACLES.
  • TO DISCONNECT THE HEATER, FIRST TURN THE POWER BUTTON TO THE OFF POSITION AND THEN REMOVE FROM THE WALL SOCKET.
  • BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE FOUND. TAKE CARE NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY CAUSE INTERNAL DAMAGE.
  • CHECK THE APPLIANCE CAREFULLY FOR DAMAGE BEFORE EACH USE.
  • THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8 YEARS AND ABOVE, AND PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE IN A SAFE WAY AND UNDERSTAND THE HAZARDS INVOLVED. CHILDREN SHALL NOT PLAY WITH THE APPLIANCE. CLEANING AND USER MAINTENANCE SHALL NOT BE MADE BY CHILDREN WITHOUT SUPERVISION.
  • CHILDREN OF LESS THAN 3 YEARS SHOULD BE KEPT AWAY UNLESS CONTINUOUSLY SUPERVISED.
  • USE ON A LEVEL, STABLE SURFACE.
  • DO NOT COVER THE ITEM IN ANY WAY WHEN IN USE AS THIS MAY CAUSE OVERHEATING.
  • DO NOT USE THIS APPLIANCE FOR ANY OTHER USE THAN THE INTENDED USE IT IS DESIGNED FOR.
  • ALLOW THE ITEM TO COOL THOROUGHLY BEFORE PUTTING ON OR TAKING OFF PARTS.
  • ANY REPAIRS MUST BE CONDUCTED BY A QUALIFIED ELECTRICIAN OR ELECTRICAL SERVICE AGENT.

Operating Instructions

  1. Plug Mini Heater into a desired 220-240V power socket.

  2. Press the “On/Off Switch” on the side of the unit to the “On” position to turn on the heater.

  3. Select your desired temperature. Use the “+” button to raise the temperature or the “-“ button to lower the temperature between 15°-32°C on “Digital Display”.

  4. Select your desired fan speed. Press the “Fan Speed Button” to choose between High (HH) or Low (LL) on “Digital Display”.

  5. When finished, press the “On/Off switch” to the “Off” position and unplug the Mini Heater from the socket. Store in a cool, dry place until the next use.

Setting the timer
Mini Heater has a built-in timer that will turn the unit off after a set amount of time.
Instructions for Use

  1. While Mini Heater is plugged in and turned on, press the “Timer Button” to activate timer, as shown.
  2. Repeatedly press the “Timer Button” to set a number of hours before Mini Heater turns off. You can choose between 112 hours.
  3. Once desired hours have been chosen, stop pressing the “Timer Button” to set.
  4. To cancel the timer, turn Mini Heater off.

Note: The Plug-in Mini Heater has an automatic 12 hours default time feature.

Remote Control
(batteries required 1PCX button battery 2025 not included) The heater can also be operated by remote control.

  1. Standby and work status Press “ON/OFF” to set standby or work status.
  2. Timing setting Press the “Timer” button until the desired set time is displayed.
  3. Fan speed adjustment Press the “Speed” button to switch to “HH” (high speed) or “LL” (Low speed).
  4. Temperature adjustment Press “+” or “-“button to increase or decrease the temperature.

Care and Maintenance

WARNING: Before beginning, any maintenance, unplug your heater, and allow to cool completely. To clean, wipe the exterior with a non-abrasive, damp cloth. Use a mild soap if needed. Dry with a soft cloth.
CAUTION: Do not let the liquid enter the heater.
DO NOT use alcohol, petrol, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage to the casing of the heater.
DO NOT immerse the heater in water. Wait until the unit is completely dry before use. Store in a cool, dry place when not in use.
Note: If the unit stops working due to overheating, please detach it from the socket and plug it in again for a reset.

DISPOSAL

  • Coopers of Stortford use recyclable or recycled packaging where possible.
  • Please dispose of all packaging, paper, cartons, and packaging in accordance with your local recycling regulations.
  • Plastics, polybags – Contains the following recyclable plastic.

Code & Symbol|
---|---
Type of Plastic| ABS
Commonly used for| CDs, crisp packets, various flexible packaging, baby bottles, sunglass lenses
Notes| Not often or widely recycled

At the end of the product’s lifespan please check with your local council- authorized household waste recycling center for disposal.

The Enterprise Department
UK Head Office, 11 Bridge Street, Bishop’s Stortford, CM23 2JU
Tel: 0844 4824400, Fax: 01279 756595
www.coopersofstortford.co.uk
EU address: D.S.B. LD, 160 Bd. de Fourmies, 59100 Roubaix, France
Tel: (+44) 1279 701269
UK Calls cost around 7 pence per minute plus your telephone company’s network access.
Please check with your telephone supplier.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Coopers OF STORTFORD User Manuals

Related Manuals