MILBANK CP3B Commercial Pedestals Instructions
- June 3, 2024
- MILBANK
Table of Contents
MILBANK CP3B Commercial Pedestals
Milbank Commercial Pedestals are pad-mounted, weatherproof electrical enclosures consisting of a utility pull section with an optional meter socket, and a customer section containing distribution and control equipment. Milbank Commercial Pedestals are an attractive, secure, easy-to-install and cost- effective solution when underground remote site power distribution and control equipment is required, replacing unsightly and inefficient strut and backboard structures.
Standard Features
- Type 3R rainproof, vandal-resistant cabinet of polyurethane powder-coated steel (aluminum or stainless steel also available)
- UL-listed
- Isolated lockable & sealable utility metering and lug landing sections
- Lockable customer section for distribution and control equipment with internal dead front
- Print pocket inside customer section door contains wiring schematics and installation instructions
- Most load centers are UL-listed for use with various manufacturers’ circuit breakers
- All stainless steel external hardware (screws, bolts, hinges, handles, hasps and sealing screws)
Utility requirements for this equipment may vary. Always consult the serving utility for their requirements prior to ordering or installing this equipment. This product must be installed by a licensed electrician. Installation of this equipment may require local electrical inspector approval.
Attractive
These units are ideal for controlling and metering:
- Traffic signals
- Street lighting
- Irrigation and sprinkler systems
- Cell towers and telephone vaults
- Pump stations
- Temporary power for fairgrounds, swap meets, outdoor markets, portable offices, holiday lights, etc.
- Outdoor lighting for athletic fields, tennis and basketball courts, parking lots, landscaping and subdivision entrances, etc.
Available Factory-Installed Options
- Meter sockets: ring type or ringless, up to 400 amp
- Main and branch breakers or T fuses
- Distribution: copper load centers and panel boards
- Clocks, timers and relays
- Photoelectric cells and controls
- Power receptacles: pin and sleeve, twist lock or straight blade
- Contactors: definite purpose, electrical or mechanically held, IEC and mercury types
- Surge protection and lightning arrestors
- Reserve inlet generator receptacle with interlocked circuit breakers
- Motor starters and relays
- Push button controls
- Thermostat controls, fans and heating strips
- Power blocks and terminal blocks
- Steel, aluminum and plywood backboards
- Transformers
- Interlock devices for circuit breakers
- Available in steel, aluminum (unpainted, painted or anodized) or stainless steel construction with powder-coated finish available in eight standard colors or special-ordered RAL colors
- Available for applications up to 400 amp, 120V, 208V, 240V, 277V, 480V – 1Ø or 3Ø
- Meter Socket
- 0 No socket
- 1 1 ring type socket (w/ test bypass)
- 2 2 ring type sockets (w/ test bypass)
- 3 2 ring type sockets (1 w/ test bypass,
- 1 without test bypass)
- 4 1 ring type socket (no test bypass)
- 5 1 ringless socket (w/ lever bypass)
- 6 2 ringless sockets (w/ lever bypass)
- 7 1 ringless socket (no test bypass)
- 8 1 bolt-on meter (w/ manual bypass)
- 9 1 ringless socket (-KK horn bypass)
- A 2 ringless sockets (-KK horn bypass)
- B 1 ring type socket (w/ test switches)
- C 1 ringless type socket (w/ test switches)
- Amp Rating
- 0 No rating
- 1 100 amps
- 2 200 amps
- 3 125 amps
- 4 400 amps
- 5 (Reserved)
- 6 600 Amp
- 8 800 Amp
- System Voltage
- 0 120V, 1Ø, 2W (4 jaw)
- 1 120V/240V, 1Ø, 3W (4 jaw)
- 2 208Y/120V, 1Ø, 3W (4 jaw + 105J)
- 3 240/480V, 1Ø, 3W (4 jaw)
- 4 480Y/277V, 1Ø, 3W (4 jaw + 105J)
- 5 208Y/120V, 3Ø, 4W (7 jaw)
- 6 240∆/120V, 3Ø, 4W (7 jaw)
- 7 240∆V, 3Ø, 4W (5 jaw)
- 8 480Y/277V, 3Ø, 4W (7 jaw)
- 9 480∆V, 3Ø, 3W (5 jaw)
- A No rating
- B 480∆/240V, 3Ø, 4W (7 jaw)
- C 120/240V, 1Ø, 3W (5 jaw)
- D 240/480V, 1Ø, 3W (5 jaw)
- E 480V, 1Ø, 2W (4 jaw)
- Main Disconnect
- 0 No main (up to 6 disconnects max)
- 1 (1) circuit breaker main
- 2 (2) circuit breaker mains
- 3 (1) T-fuse pullout main
- 4 (3) circuit breaker mains
- 5 (Obsolete)
- 6 (1) 4-pole main (100 amps max)
- 7 (Obsolete)
- 8 (1) 4-pole 100A & (1) 2-pole 100A
- 9 (Reserved)
- A (Obsolete)
- B (2) circuit breaker mains w/ interlock
- C (2) T-fuse pullout mains
- Enclosure Size
- A 16″W x 17″D x 48″H
- B 24″W x 17″D x 48″H
- C 24″W x 30″D x 48″H
- C 16″W x 5″D x 46″H (CP2B)
- D 44″W x 24″D x 60″H
- D 12″W x 9″D x 64″H (CP3A)
- E 16″W x 17″D x 41″H
- F 12″W x 9″D x 64″H
- G 16″W x 17″D x 48″H
- H 24″W x 17″D x 48″H
- J 16″W x 17″D x 32″H
- K 32″W x 20″D x 60″H
- L 16″W x 17″D x 48″H
- M 24″W x 17″D x 41″H
- N 16″W x 6″D x 46″H
- X 24″W x 24″D x 60″H
- Y 32″W x 24″D x 60″H
- Z 32″W x 24″D x 64″H
- Distribution Interior
- 0 (2) 16-circuit loadcenters
- 1 (1) metered 8-circuit load center & (1) unmetered 8-circuit load center
- 2 (2) 8-circuit loadcenters
- 3 (1) 12-circuit loadcenter
- 4 (1) 12-circuit loadcenter & (1) 8-circuit loadcenter
- 5 (1) 16-circuit loadcenter
- 6 Lug-lug main & branch breakers only
- 7 (1) 8-circuit loadcenter & (1) 16-circuit loadcenter
- 8 Fused pullout switch
- 9 (1) 24 circuit loadcenter
- A (2) metered 8-circuit loadcenters & (1) unmetered 8-circuit loadcenter
- B (2) 24-circuit loadcenters
- C (1) 24-circuit panelboard
- D (1) 42-circuit panelboard
- E (1) 30-circuit panelboard
- F (1) 18-circuit panelboard
- G (1) 30-circuit loadcenter
- H (2) 12-circuit loadcenters
- J No distribution (main only)
- K (1) metered 4-circuit load center & (1) unmetered 4-circuit load center
- L No branch breakers (distribution blocks only)
- M (Obsolete)
- N Metered & unmetered lug-lug breakers
- P Metered lug-lug breakers
- R (1) metered 8-circuit load center, (1) unmetered 8-circuit load center, & (1) metered 12-circuit load center
- T (1) 8-circuit loadcenter
- U Unmetered lug-lug breakers
- V (1) 6-circuit loadcenter
- W (2) 6-circuit loadcenters
- X Non-standard
- Y (1) 42 circuit loadcenter
note: Due to size and regulatory constraints, not all combinations will result in a valid catalog number.
Milbank Manufacturing | 4801 Deramus Ave., Kansas City, MO 64120 | 877.483.5314 | milbankworks.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>