VUEROID D21 Ultra Solo Duo Tegas Broadcast Multimedia User Manual

June 1, 2024
VUEROID

VUEROID D21 Ultra Solo Duo Tegas Broadcast Multimedia

Specifications:

  • Model: D21 ULTRA Solo / Duo
  • Camera Resolution : 4K UHD
  • Memory Card Slot : MicroSD
  • Connectivity: Built-in Wi-Fi, GPS
  • Special Features : AI ADAS, Ultra Night Vision, HDR

Product Usage Instructions

Safety Information:

Before using the VUEROID Dashcam, ensure the following safety measures:

  • Do not expose the product to rain, moisture, or water to avoid electric shock or fire risks.
  • Do not attempt servicing unless qualified. Contact a service technician if the product has been exposed to water, operates abnormally, or shows performance changes.

Items Included in the Package:

The package includes:

  • Dashcam
  • Rear Camera (only in D21 ULTRA Duo model)
  • Hardwiring Cable (3m/9.8ft)
  • Rear Camera Cable (6m/19.6ft)
  • Quick Manual

Key Features:

  • Front CMOS camera with 4K UHD Image Sensor
  • AI ADAS for safety alerts
  • Ultra Night Vision for enhanced low-light recording
  • Built-in Wi-Fi and GPS
  • Format Free memory card support

Installation Caution:

  • Install the device in a safe area with the vehicle turned OFF.
  • Ensure correct MicroSD card insertion before powering on.
  • Keep the installation area clean and unplug the DC power if not in use for an extended period.
  • Avoid dropping the product and consider parking indoors during extreme temperatures.

Inserting MicroSD Card:

  • Avoid applying excessive force or inserting the MicroSD card incorrectly.
  • Frequent testing for errors is recommended as MicroSD cards are consumable items.
  • Turn off the Dashcam before removing the MicroSD card and back up important files regularly.

FAQ

  • Q: What should I do if the Dashcam shows a marked change in performance?
    • A: Contact a qualified service technician for assistance as it may require servicing.
  • Q: Can I use a MicroSD card other than VUEROID’s recommended card?
    • A : Yes, but any issues arising from using a different card are the user’s responsibility.
  • Q: How can I format the memory card manually?
    • A: Press the Voice and Wi-Fi buttons simultaneously for more than 3 seconds.

Safety information before using VUEROID Dashcam

Warning

Caution

Do not expose the product to rain, moisture or water under any circumstances, it may result in the risk of electric shock or fire.

To reduce the risk of electric shock, do not perform any servicing other than that contained in this instruction unless you are qualified to do so. Please make sure to have the product serviced by a qualified service technician if you are facing with some cases as follows;

  1. The product has been exposed to rain or water.
  2. The product does not seem to operate normally.
  3. The product shows a marked change in performance.
    VUEROID does not warrant any defects that can be caused by the owner’s fault.
    VUEROID is not responsible for any damage that occur while driving.

Items included in the package

VUEROID-D21-Ultra-Solo-Duo-Tegas-Broadcast-Multimedia-
fig1

Rear camera and cable included in D21 ULTRA Duo model only.

VUEROID-D21-Ultra-Solo-Duo-Tegas-Broadcast-Multimedia-
fig2

Part names

VUEROID-D21-Ultra-Solo-Duo-Tegas-Broadcast-Multimedia-
fig3

VUEROID-D21-Ultra-Solo-Duo-Tegas-Broadcast-Multimedia-
fig4

  • Format memory card manually: Press the Voice and Wi-Fi buttons simultaneously for more than 3 seconds.

Key features

VUEROID-D21-Ultra-Solo-Duo-Tegas-Broadcast-Multimedia-
fig5

Installation

Caution

  • Make sure the installation area is clean.
  • Unplug the DC power if you are not using the device for a long period of time.
  • Do not drop the product as it may not function properly.
  • During extremely high temperatures or in a hot weather season, parking indoors is suggested.

Inserting MicroSD Card

  • Do not apply excessive force on the MicroSD card or insert in the wrong direction. Any actions that may cause a MicroSD card error will be the responsibility of the user.
  • Please test the MicroSD card for errors frequently because it is a consumable item, it should be replaced periodically.
  • Make sure the Dashcam is turned off when you remove the MicroSD card.
  • Any problems arising from the use of MicroSD cards other than VUEROID are the responsibility of the user.
  • Periodically back up the important recorded files on other storage devices.
  • Make sure to install a device in a safe area and make sure the vehicle is turned OFF.
  • Check if the MicroSD Card is inserted correctly before connecting to a power.

Installing front camera

VUEROID-D21-Ultra-Solo-Duo-Tegas-Broadcast-Multimedia-
fig6

  1. Clean the area where Dahscam will be installed.
  2. Remove the protective film from the mount bracket.
  3. Make sure the front camera lens is located in the center of the windshield. Press the mount to the installation location.
  4. Connect the power cable to DC-IN power port and rear camera.
    • Leave enough space and avoid overlapping wires to avoid interrupting reception with other devices such as navigation systems.

Connecting Hardwiring Cable

VUEROID-D21-Ultra-Solo-Duo-Tegas-Broadcast-Multimedia-
fig8

Installing Rear camera

VUEROID-D21-Ultra-Solo-Duo-Tegas-Broadcast-Multimedia-
fig9

  1. Clean the area where the rear camera will be installed.
  2. Remove the protective film from the mount bracket.
  3. Make sure the rear camera lens is located in the center of the windshield. Press the mount to the installation location.
  4. Connect rear camera cable.

WARNING

  • * Before installation, make sure the vehicle engine is off.
    • Make sure the installation location doesn’t interfere with the camera view.

Using PC Viewer (Windows/Mac)

Software download and install

You can download VUEROID PC Viewer software from the VUEROID website (https://vueroid.com/support/downloads) and install it on your PC.

VUEROID-D21-Ultra-Solo-Duo-Tegas-Broadcast-Multimedia-
fig10

Start PC Viewer

  1. Insert the MicroSD Card to your PC.
  2. Open VUEROID PC Viewer.
  3. Click ‘Open Folder’ and select the inserted MicroSD Card.
  4. Video files in the MicroSD Card will be added in the file list of PC Viewer.
  5. Select the video you want to play

Using a smartphone application (Android/iOS)

App download and install

Search “VUEROID Dashcam” in the Google Play Store or Apple Store then install it on your smartphone.

Connect your Dashcam to your smartphone via Wi-Fi

Turn on the Wi-Fi by pressing the Wi-Fi button on the Dashcam. Then it shows an SSID (VUEROID_D21-UTLRA-D/S_xxxxxx) in the list of Wi-Fi networks.

VUEROID-D21-Ultra-Solo-Duo-Tegas-Broadcast-Multimedia-
fig11

  1. Press “OK” once the “Connect Dashcam” screen pop up.
  2. Select the Wi-Fi network (VUEROID_D21-UTLRA-D/S_xxxxxx) in the Wi-Fi network list.
  3. Enter password. The default password is 12345678

Initial Setting

  1. Voice Pack : Select the language of voice guidance
  2. Country: Select country
  3. GMT : Select standard time

Home screen

VUEROID-D21-Ultra-Solo-Duo-Tegas-Broadcast-Multimedia-
fig12,.,.,.,.,..,

  1. Wi-Fi Status : Displays Wi-Fi status and information of the connected Dashcam.
  2. Connect Wi-Fi : Connect or disconnect Wi-Fi.
  3. Live View : Front / Rear live view.
  4. File List : View and play the recorded files.
  5. History: View your driving history.
  6. Setting: Menus for setting.

Live View Mode

  1. Left/Right Reverse: Reverse the image Left / Right.
  2. Snapshot : Capture an image from the video.
  3. Full Screen: Display the full screen.
  4. CH :(Front / Rear): Select front or rear live view.
  5. ADAS Setting: Advanced Driver Assistance System (ADAS) settings.

ADAS Setting

ADAS On/Off (default On)
Vehicle Type STaebdatnh/eSbUaVr/Ttoruscwki(tdchefaSueldtaSne/dSaUnV)/Truck
LDWS On/Off (default On)
LDWS Sensitivity 5Ta0bkmth/eh,b6a0rktmo/shw, i8tc0hkmsp/hee, d100km/h

(default 80km/h)
FCWS| On/Off (default On)
FCWS Sensitivity| Low/Middle/High (default Middle)
FVSA| On/Off (default On)
RCWS| On/Off (default On)
RCWS Sensitivity| Low/Middle/High (default Middle)
Front PCWS| On/Off (default On)
Rear PCWS| On/Off (default On)
Safety Camera| On/Off (default On)
Mobile Camera Zone Alert| On/Off (default On)

  1. LDWS: Lane Departure Warning System
  2. FCWS: Front Collision Warning System
  3. FVSA: Front Vehicle Start Alarm
  4. RCWS: Rear Collision Warning System
  5. Front PCWS : Front Pedestrian Collision Warning System
  6. Rear PCWS: Rear Pedestrian Collision Warning System
  7. Safety Camera : Alert when the vehicle approaches or passes the speed limit zone

File list

You can view and play the recorded videos through  File list

  1. Drive: Driving recorded videos. Recorded videos are saved for a 1-minute segment with an auto-looping mechanism.
  2. Event: Event-triggered videos. Video saved for 30 seconds, 10 seconds before an impact and 20 seconds after an impact.
  3. Park: Parking recorded videos. Video saved for 30 seconds including motion/impact event.
  4. Manual: Manual recording videos are saved for 30 seconds, 10 seconds before the manual recording button is pushed and 20 seconds after.
  5. Phone : Recording videos downloaded in your smartphone

History

VUEROID-D21-Ultra-Solo-Duo-Tegas-Broadcast-Multimedia-
fig16

View your overall driving history such as trip distance, events, recording time, speed. You can check the data sorted by day, week, month and year base.

Travel log

VUEROID-D21-Ultra-Solo-Duo-Tegas-Broadcast-Multimedia-
fig17

Travel-log-Drive shows vehicle’s location on map, distance, speed, and event. You can check the data by date and time.

Edit video and share

VUEROID-D21-Ultra-Solo-Duo-Tegas-Broadcast-Multimedia-
fig18

You can edit the recorded videos in the file list. To start the editing, the video should download to your smartphone first. Edit the video then share it after disconnecting VUEROID Wi-Fi and use the mobile network.

Setting

Recording| Image Quality

Voltage Cut-off Voltage and Time Parking Record, Driving Record Low Power Mode

Driving, Parking Mode Rear Recording in Parking

---|---
Event| Driving and Parking Impact Front and Rear Motion
Sound| Voice Recording Speaker Volume Event Notification
Time| Standard Time Daylight Saving Time Time Setting
Memory| Memory Allocation for recording priority SD Card Format
System| Front, Rear Security LED Speed Unit, Mode

Wi-Fi Auto-On, Wi-Fi Bandwidth, Wi-Fi AP Change Password

Firmware Upgrade System Information Reset

Product Specifications

Camera Sensor Front: SONY STARVIS 2 (IMX678) Rear: SONY STARVIS (IMX307)
View Angle Front: (D)165° x (H)125° x (V)62° Rear: (D)139° x (H)101° x (V)60°
Memory Card MicroSD Card support 16GB/32GB/64GB/128GB/256GB
Wi-Fi Built-in
GPS Built-in
LED Indicators Front: Security & Status LED Rear: Security LED
G-Sensor 3-Axis Acceleration Sensor, +2g / -2g
Speaker Built-in
Microphone Built-in
Video Codec H.265 Main Profile
Recording mode DSlreiveipng&/EWveanket/MUpa)nual/Parking (Motion, Time-lapse,
Dimensions / Weight Front: 114 x 65 x 37 mm / 93g

Rear: 58 x 33 x 26.5 mm / 25g

Power Input| DC 12V-24V
Power Consumption| Max. 4.0W (12V)
Operating Temp.| -20℃ ~ 70℃ (-4℉ ~ 158℉)
High Temp. Cut-off| Approximate 70℃ (158℉) / Battery discharge prevention

Frequently Asked Questions

Is it possible to use the product regardless of vehicle type

The product for both 12V and 24V can be used regardless of vehicle type.

What is a low voltage prevention function (vehicle battery discharge

The product is embedded with a low voltage prevention function. You can set the voltage value in the settings menu. If the voltage of a vehicle drops below the set value, the power of the product will be turned off automatically.

No impact has occurred but a video file is saved in an event folder.

The product detects impact through a G-sensor. An impact is saved in an event folder when the product detects the shaking of a vehicle going over a speed bump or in other situations. It is possible to adjust the impact sensitivity in setting menu.

No power or keeps rebooting

Check the power jack is properly plugged in Check the hardwiring cable is properly connected with the fuse and ground wire to the vehicle body Check the SD card SD card properly inserted Replace SD card Format SD card

Warranty Information

The following not apply to the warranty.

  1. Cosmetic damage such as scratches and dents.
  2. Damage caused by accident or natural disaster.
  3. Damage caused by service performed by anyone who is not an authorized service provider of VUEROID.
  4. Damage to a product by using power or accessories not supplied by VUEROID.

Firmware and Manual downloads is available in the VUEROID website (http://www.vueroid.com/support/downloads)

N OTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency  energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Caution : Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals