TH GLOBAL K12 Handheld Audio Microphone Speaker User Guide

June 1, 2024
TH GLOBAL

TH GLOBAL K12 Handheld Audio Microphone Speaker

TH-GLOBAL-K12-Handheld-Audio-Microphone-Speaker-
product

Product Usage Instructions

  1. Reorient or Relocate the Receiving Antenna
    To improve reception, adjust the position of the receiving antenna. Experiment with different orientations or move the antenna to a location with better signal reception.

  2. Increase Separation Between Equipment and Receiver
    Ensure there is adequate distance between the equipment and the receiver to minimize interference. Position them apart to reduce signal disruptions.

  3. Connect Equipment to a Different Circuit
    Plug the equipment into a power outlet on a circuit that is separate from the one powering the receiver. This can help in reducing electrical interference.

  4. Consult Dealer or Technician
    If you encounter persistent issues with reception or interference, seek assistance from the dealer or a qualified radio/TV technician for expert help.

Frequently Asked Questions (FAQ)

Q: What should I do if I still experience reception issues after following the instructions?
A: If reception problems persist, try repositioning the equipment and antenna, ensuring proper connections, and minimizing nearby electronic devices’ influence. If problems continue, consult a professional for further assistance.

Function Introduction

TH-GLOBAL-K12-Handheld-Audio-Microphone-Speaker-fig-
\(1\)

  1. Short press once to decrease the volume and long press the previous song
  2. Manually switch playback mode. BluetOOth/TF card A-J disk. etc
  3. Short press the volume once. and long press one song
  4. Short press toggle LED light.ng effect. Long press for 2 seconds to turn off the LED lighting effect
  5. Long press for three seconds to power on/oft short press play/pause, double-click to turn On/off couplets.
  6. Short press to turn on/off the Original Sound.
  7. On and on. and short press once to mute the microphone. on and on. and short press once to mute the microphone.
  8. Short press Microphone Volume Plus. double-click Reverb Plus.
  9. Short press the microphone volume down. double-click the reverb to decrease
  10. Short press to cancel the original sound on/off. long press to switch the magic sound.
  11. Microphone indicator. blue light flashing in an unconnected state. blue light is always on when connected successfully. red light is on when charging. and the red light is Off after full charge.
  12. Microphone Type-C SV charging port
  13. Headphone jack.
  14. TF card slot. insert files With MP3 audio class automatically switch to TF mode.
  15. Audi0 Type-C SV charging interface.
  16. USB socket. insert files With MP3 audio class automatically switch to USB mode.
  17. Audio indicator. blue light flashing in an unconnected state. blue light is always on when connected successfully. red light is on when charging. and the red light is off after full charge.

Specification

  • Output power: SW
  • Input signal: 42DB
  • Battery:  high-performance large-capacity lithium battery
  • Charging voltage: DCSV
  • Frequency range: 90Hz-18KHz
  • Power supply mode: DC charging and built-in battery

Key features

  • It adopts a high-reduction electroacoustic system
  • 3.7V high-performance battery
  • Strong sound penetration and wide coverage
  • Super MP3 audio decoding technology
  • Full digital audio processing, and clear sound quality. high sensitivity

Charging Connection Diagram

TH-GLOBAL-K12-Handheld-Audio-Microphone-Speaker-fig-
\(2\)

Warranty Card

Product Information

  • Product Name: Pocket K song audio
  • Product model: KI 2
  • Executive standard: GB-T92S4.1-2021

Service & Warranty

Warranty Service Terms:

  1. If the product has any functional problems. it can enjoy warranty service, and the warranty period is 12 months.
  2. Man-made damage, breakage. artificial scratches. those without warranty cards are not covered by the warranty.
  3. The customer must fill in all the necessary information (such as customer name, address, telephone number, date of purchase, etc.).
  4. We are responsible for the repair costs incurred during the warranty and we are not responsible for freight and other costs.
  5. Warranty service requires a warranty card and operation according to the requirements to be guaranteed, other- wise there is no warranty.
  6. This product complies with the radio management regulations and technical standards of the People’s Republic of China.

Tips
This product is sold without a power adapter, if the power adapter is used for power supply. it should be purchased to use a power adapter that has obtained CCC certification and meets the requirements of the standard. Batteries must not be exposed to conditions such as sunlit ht. fire or similar overheating, and should on be replaced with the same type of battery if there is a risk of explosion If the battery is not replaced properly.

Handling of common issues

TH-GLOBAL-K12-Handheld-Audio-Microphone-Speaker-fig- 4

FCC STATEMENT

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals