OUPES PS6 100-120V Portable Power Station User Manual
- June 1, 2024
- OUPES
Table of Contents
OUPES PS6 100-120V Portable Power Station
Ideal portable emergency power for outdoor camping and home use.
Disclaimer
- The Company is not responsible for any damage caused by force majeure (e.g. fire, typhoon, flood, earthquake or customer’s negligence, abuse or use in other unusual circumstances).
- The Company is not responsible for the loss caused by the use of non-standard connectors.
- The Company is not responsible for any damage caused by the wrong operation which didn’t follow the instructions of user manual.
Product List
| No | Items | Qty. |
|---|---|---|
| 1 | Portable Power Station | 1 |
| 2 | AC Adapter | 1 |
| 3 | 7909 connected wire for Vehicle’s 12V Output | 1 |
| 4 | User Manual | 1 |
| 5 | Warranty Card | 1 |
Function Instructions
Function Description
- AC Output Port
- AC Output Power On/Off Switch
- Main Power On/Off Switch
- Car Charger and DC5521 Output Ports Power On/Off Switch
- 12V Car Charger Output Port
- 12V DC5521 Output Port
- USB-C Input & Output Port
- USB-A Output Port
- USB-C & USB-A Output Power On/Off Switch
- LCD Screen
- LED Light Power On/Off Switch
- LED Light
- 7909 Recharging Input Port
LCD Screen Description
Direction of Use
The LCD Battery Capacity Ring indicates the left capacity. The ring has been divided into 6 equal segments, accounting for about 17%~35%~51%~68%~85%~100%. When discharging, the blue segments of the ring will disappear according to the real-time left capacity. When recharging, the blue ring will be flashed clockwise along the trajectory, and the digital number will show you the real- time input charging power. After full charge, the whole blue ring will light up and remain stable. After charging, please unplug the adapter.
CAUTION
- There will be efficiency loss of the input power which displays on the LCD screen.
- Please charge the Product at the ambient temperature of 0-40°C.
- Must make sure that the connection is in good contact , and adapter work normally, otherwise, it may cause potential safety hazards.
- In order to reduce the power consumption and prolong the In order to reduce the power consumption and prolong the when it is not in use.
5 Different Recharging Ways
Standard AC Adapter
Please connect the 7909 input charge port of the Product and wall outlet with
our standard 1 00W AC Adapter , it will take about 7 .5 hours to full charge.
USB-C Charger
Please connect the USB-C port of the Product and wall outlet with USB-C
charger which support the PD communication protocol, it will take at least 10
hours to full charge, depending on the input power of USB-C charger.
CAUTION
The max. input power of USB-C charging is 60W.
Car Charger
Please connect the input 7909 charging port and the vehicle’s 12V cigarette
output port with our standard 7909 transfer cables.
It will take at least 8 hours to full charge.
CAUTION
The max input power of car charging is 78W.
Solar Panels
Please connect the output cable of 1 00W solar panels and the 7909 input
charging port. It will take at least 8 hours to full charge, depending on the
light of the sun.
CAUTION
In order to get maximum solar conversion efficiency, please keep the solar panels at a vertical angle to the sun’s rays.
Adapter+ USB-C
Adapter and USB-C charging can be worked together to shorten the charging
time. In this way, 3.5 hours can be charged to 80%, and 5 hours to 100%.
CAUTION
The max. total input power is 160W.
AC Output Instructions
Main Power Switch
POWER ON: Long press the main power button for 3 seconds, the background light around the button will lit up , and the LCD screen will light up too, the blue battery ring and battery percentage will display.
POWER OFF: Long press the main power button for 3 seconds, the background
light and LCD screen will be off at the same time.
AC Output Instructions
When the main power button is turned on, gently press the AC Output button (2),the icon in the LCD screen will lit up. It means the function of this area can be used normally. Press this button again, the icon will disappear, and the function of this area will stop working.
DC5521 & Car Charger Output Instructions
When the main power button is turned on, gently press the Car Charger and DC5521 Output button(4), the icons and in LCD screen will lit up. It means the function of this area can be used normally. Press this button again, the icons will disappear, and the function of this area will stop working.
USB-C &USB-A Output Instructions
When the main power button is turned on, gently press USB-C& USB-A Output
button (9), the icons 
LCD screen will
lit up. It means the function of this area can be used normally. Press this
button again, the icons will disappear, and the function of this area will
stop working.
The USB-C port works independently, and can identify the working mode of input or output by itself.
LED Light Instructions
In the main power on state. The power on/off button is on the other side.
Presence, 50% brightness, press again, 100% brightness, then press again, it
will change to SOS flashing mode, and press once more to power off.
Appliances Run Time Instructions
| Icons | Appliances | Run time |
|---|---|---|
| 311OmAh phone | 42 times | |
| 30Wh Tablet PC | 17 times | |
| 60Wh Laptop | 8 times | |
| 10W Light | 50.5 hours | |
| 16Wh Camera | 31 times | |
| 60Wh Drone | 8 times | |
| SOW Mini Cooler | 10 hours | |
| 30W Fanner | 17 hours | |
| 30Wh Electric Tool | 17 times | |
| 10W WIFI | 50.5 hours | |
| 110W TV | 4.6 hours | |
| 40W Ventilator | 12.6 hours |
Frequency switching operation
- In the power-on state, turn off the AC output, and press the main power button & the DC button(USB output) at the same time to enter the switching frequency menu;
- Press the AC outputs button to switch the frequency, the setting the frequency will be flashing;
- Long press the main power button to set the frequency, SUC will be displayed if the setting is successful, and then long press the main power button to exit the setting menu.
Storage and Maintenance
- When the device is not in use, please turn off all switches to reduce product power consumption and prolong the product battery lifetime;
- Please keep the surface of the product clean, ensure that the product does not contact gasoline, volatile oil, thinner, kerosene, etc., to avoid corrosion of the product shell;
- Please store the product in a dry, ventilated and dustless environment. Storage temperature range in 0~4o·c , avoid direct sunlight;
- Please fully charged the battery before storage, and charge it at least once every 6 months, to avoid dormancy of the battery, which will affect normal use;
- If the product needs to be transported long distance, please Keep the battery power between 40%~60%, otherwise there will be potential safety risks.
Main Technical Specification
Output Technical Parameters
AC Output| Rated Voltage| 100~120Vac/220~240Vac
Rated Power| 600W
Peak Power| 1000W
Frequency| 50/60Hz
DC 12V & Car
lighter Output
| Rated Voltage| 12V
Rated Power| 10A
USB-A Output| 5V/3A; 9V/2A; 12V/1.5A (18W Max)
USB-C Output| 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/3A
(60W Max)
LED Light| Press once, 50% brightness, press again,
100% brightness, then press again, it will
change to SOS flashing mode, and press once
more to power off.
Input
Input Voltage| 12V~30V
AC7909 Input
Power
| 100W Max
USB-C Input
Power
| 60W Max
Battery
Rated Capacity| 595.2 Wh
Rated Voltage| 19.2 Vac
Battery Type| LiFePQ4
Common Information
IP Grade| IP21
Working
Temperature
| 0~40°C
Dimensions| 10.5 x 7.76 x 9.73 in (27 x 20 x 25 cm)
Net Weight| 15 lbs (6.8 kg)
Fault Code and Trouble Shooting
| Code | Description | Performance | Troubleshooting |
|---|---|---|---|
| EOO | AC Short Circuit Protection |
flashing, no output
| Press the AC Output Power on/off button for recovery.
E01| Over Load Production|
flashing, no output
| Flashing icons indicates which circuit overload. Press corresponding button
for recovery.
E02| Battery Low Voltage Protection| Related function icons flashing
Corresponding terminals no output| Press corresponding button for recovery.
E03| AC&DC Output run simultaneously, system overload| flashing, AC no
output| AC&DC Output run at the same time, the total load power is over 600W.
Shut down the AC output, or lower down the load of AC output, priority support
the DC output.
E04| Inverter fault|
flashing, no output
| Inverter output voltage too high/low; Inverter over temperature;
DC main line voltage too high/low;
Loaded current abnormal.
E05| BMS fault| flashing, other function icons Can’t lit up, no output|
Charge over voltage protection; Discharge under voltage protection; High
Temperature Protection; Low Temperature Protection;
Short Circuit Protection.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>