Smart Juice BJ-01 3 In 1 Rechargeable Blender and Juicer Instruction Manual
- June 1, 2024
- Smart Juice
Table of Contents
Smart Juice BJ-01 3 In 1 Rechargeable Blender and Juicer
Thank you
Thank you for purchasing. Please read this instruction manual carefully and follow the instructions. Please keep this instruction manual for future reference.
Parts Name
1. | Citrus juice cone | 8. | Stainless steel blades |
---|---|---|---|
2. | Citrus juice filter | 9. | Unit cover |
3. | Axis | 10. | 380ml juice cup (SPA free) |
4. | 220ml citrus juice cup (SPA free) | 11. | Silicon hand strap |
5. | Axis hole | 12. | Cup cover |
6. | Juicer button | 13. | Pure juice cone |
7. | Blender button | 14. | USS cord |
Important Safeguards
The following safety precautions should always be followed to reduce the risk of electric shock, personal injury or fire. It is important to keep these instructions after you have read and understood them and before attempting to use the product.
-
This appliance is designed for personal, non-professional use only.
-
Please place the unit on a flat, firm and safety surface before use.
-
Always switch off the unit when not in use, installing or before cleaning.
-
This is not a toy. And children should be supervised by a responsible adult to ensure that
they do not play with the appliance. -
Blades are sharp. Handle with care. Do not touch the blades directly with your hands when removing or installing.
-
Do not overload the cup with excess food.
-
Do not insert foreign objects, such as knives, forks or spoons etc. into the cup as this may cause damage to the unit or hurt the person.
-
Do not use attachments not recommended and not provided with the appliance.
-
The appliance is designed for fruit juicing. It is not suitable for blending meat or nuts.
-
Never operate this unit when it is damaged and not working properly, return it to service center for repairing.
-
Keep the unit far away from any heated surfaces and equipment.
-
Do not drop the main unit into fire, it contains batteries, and may cause explosion.
-
Do not immerse the USS cord and main body into water to avoid and accident.
-
Do not try to dis-assemble unit by yourself.
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. Do not let them use the appliances without supervised by a person responsible for their safety.
Specification
Model no. | BJ-01 |
---|---|
Input | DCSV |
Output | DC7.4V, SSW |
Juice cup capacity | 380ml |
Citrus juice cup capacity | 220ml |
Rotation speed | 18000rpm |
Charging time | Approx. 3 hours |
Operation time (full charges) | Around 16 times (for blender) 40S) Around 28 |
times (3 mins) & 85 times (1 min) (for juicer)
Operating Instructions
A. Before first use
- Unpack the unit
- Remove the unit from the packaging and unpack all the accessories as well as the printed documents.
- Remove all accessories and clean all accessories thoroughly.
- Put the parts back into the unit.
- Charge the unit
- When you receive the machine, charge it for 3 hours first. During charging, the LED indicating light will go on in Red color. When the charging is finished, the light will turn to White color on.
- Charge Alert
- When the blender is low on power, the LED will flash red
B. Operation
Use as Blender:
-
Wash and cut the fruit into small pieces (please get rid of nuts, hard items, thick skin etc.).lace cubes or too much pulp may also cause the blades to get stuck. Shaking the cup can make the blender work better, Milkshakes or smoothies will be more uniform.
-
Put the fruits into the juice cup at about 60°/o of the max capacity. Then, add water into the juice cup to the max level or below.
-
install the unit cover to the side of airhole of the main unit( Fig.1 ).
-
install the main unit to the juice cup (with in gradients )by turning the manumit lock wisely until you hear a “beep” sound (Fig. 2).
-
Place the minion upside-down on a flat surface( Fig .3 ).
-
DoubleClick the Blender button to start the blending. The corresponding indicator will go on in White color accordingly.
-
After 40 seconds, the unit will stop operation automatically. Or you could stop the operation at any time by pressing the Blender button once.
lf the mixtures opt we limited ,start the unit to blend again. -
Remove the main unit carefully by turning ant-clock wisely and you can enjoy the juice directly from the cup. Or you could cover the juice cup with the cup cover (Fig. 4) and put into the refrigerator for storage.
Notes:
- Blades are sharp, please handle with care!
- The unit can be used for ice crushing. But, please blend the ice immediately once get out from the freezer.
Use as Citrus Juicer:
-
install the unit cover to the side of blades of the main unit by turning clock wisely ( Fig. 5 ).
-
The installation is well finished until there is a “beep” sound. Then put the main unit upside down on a flat and stable area.
-
Put the citrus juice cup onto the main unit by aligning the dots ( Fig. 6 ).
-
Then, put the citrus juice filter onto the citrus juice cup ( Fig. 7 ).
-
install the axis in the middle of the filter ( Fig. 8 ) and press it firmly into the axis hole.
-
Put the citrus juice cone align with the axis ( Fig. 9 ).
Wash and cut the Citrus (like orange, lemon or grapefruit) into half. -
Double click the Juicer button to start the operation. You can select the operation for 1 minute or 3 minutes by pressing the Juicer button. The unit will stop operation automatically when the selected time is reached.
3 seconds after the time is selected, the corresponding indicator light will go on in White and there is a “beep” sound. -
Put the half citrus on the cone and squeeze it by hand ( Fig. 10 ).
-
You can stop the operation at any time by pressing the Juicer button once.
-
After finishing, pour the citrus juice into a cup and enjoy.
Notes:
- Pulp buildup on citrus juice cones and filters can interfere with juicing and needs to be removed during use.
Use as juice maker:
Install the unit cover to the side of blades of the main unit by turning
clock. wisely ( Fig. 11 ).
The installation is well finished until there is a “beep” sound.
-
Choose the short connecting rod( Fig.12 ).
-
laser the short connecting rod into the hole of the main unit ( Fig. 13 ).
-
Place the citrus juice cone align with the connecting rod ( Fig. 14 ).
-
install the pure juice cone into the juice cup by turning clock. wisely (Fig. 15 ).
-
Wash and put the fruits (like grapes, blueberries or pomegranate) into the pure juice cone ( Fig. 16).
-
Hold the main unit with the cone downward ( Fig. 17 ).
-
Double click the Juicer button to start the operation. You can select the operation for 1 minute or 3 minutes by pressing the Juicer button. The unit will stop operation automatically when the selected time is reached.
-
seconds after the time is selected, the corresponding indicator light will go on in White and there is a “beep” sound.
-
Press the main unit downward towards the fruit and squeeze them. The juice will drop into the juice cup.
-
After finishing, you can enjoy the pure juice directly from the cup. Or you could cover the juice cup with the cup cover and put into the refrigerator for storage.
Notes:
- Pulp buildup on citrus juice cones and filters can interfere with juicing and needs to be removed during use.
Cleaning Instruction
WARNING: DO NOT IMMERSE THE USB CORD AND THE MAIN BODY INTO WATER OR RINSE UNDER THE TAP!
Caution: Do not use detergent, gasoline, benzene, thinner, or other solvents to clean the unit to avoid damage of the appliance.
- Turn off the unit before cleaning.
- It can be rinsed with running water, but do not immerse the host and USS cable in water. Use a damp cloth to clean and wipe dry.
- Wash the all parts and glass bowl under running water with sponge.
- Make sure all parts are dry thoroughly after each cleaning esp. the blades in order to avoid rusting.
WARNING:
- The Blades are sharp. Handle with care and patience.
- Cleaning must be process after each operation.
Trouble shooting
Problem | C a use | Solution |
---|---|---|
Cannot tum on/ power off during operation |
- Not enough power supply.
- The unit cover is not installed properly
|
- Connect the USS cord for charging.
- install the unit cover to the side of blades of the main unit by turning clock wisely
Power off during operation and 3 “didi” sounds occur| Overload protection or the blades are block|
- Remote the excess ingredients or cut into smaller pieces and restart again.
- Shaking the cup can make the blender work better, Milkshakes or smoothies will be more uniform
Water leakage during blending| The installation of main unit and juice cup is not tight.| Install the main unit with juice cup properly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>