Urocomm UROZETTA 2 4G LTE Mobile Router User Manual

: June 4, 2024
: Urocomm

Table of Contents

Buttons
How to connect a device to your UROZETTA WiFi Network
Use of SIM card slot
Device Management
About WebUl Change your settings though your web browser
About 4G LTE Mobile Router Specifications
FAQ
FCC Statement
RF EXPOSURE INFORMATION (SAR)
Contact
Copyright Notice
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

**Urocomm UROZETTA 2 4G LTE Mobile Router User Manual

U2A

U2A
U2A

U2B

U2B
U2B

Buttons

Power Button

Hold the Power Button for more than 3 seconds to power on/off the device. Press to turn the screen on or off.

Forced Reset Button

Use a pin (not provided) to press the reset button for more than 8 seconds to force power off.

Screen Lock

After 60 seconds without use, the device screen will lock. After 90 seconds without use, the screen will turn off. To lock and turn off the screen, just press the power button.

Unlock Screen

Press the power button to turn on and unlock the Screen.

How to connect a device to your UROZETTA WiFi Network

WiFi Network Manual Connection (1) Find the SSID and KEY displayed on the bottom label of the UROZETTA WiFi device.
Select the SSID and enter the KEY on your phone or any other device to connect to the network.
Note: If the SSID and the KEY displayed on the bottom label of the device are worn off and cannot be viewed clearly, you can start the UROZETTA WiFi device and view it in “Home”-> “Network” -> “WLAN”.
2. Code Scan Connection (Camera Scanning)
Start up your UROZETTA WiFi device and enter the Home screen.
Press the “I want to connect ” button at the middle right of the screen to enter the code scanning page.
Scan the QR code with your phone.
Your phone will automatically connect to the network upon scanning.
WPS One-Press Connection
Turn on the “WPS” function in the settings of your phone or other device you want to connect.
Press the “I want to connect ” button at the bottom right of UROZETTA WiFi device’s screen to enter the connection mode selection page.
Select “WPS connection” to enter the WPS network operation page, and Press the ” ” button to activate the WPS network function of UROZETTA WiFi device.
Your phone or other device should automatically find the network. After the confirmation prompt pops up on your phone or other device, Press “OK” to connect to the network. Note: This feature is only available on Android devices.

Use of SIM card slot

UROZETTA WiFi device supports “Physical SIM “mode and “Virtual SIM “mode. You can change the setting by navigating to “Home”-> “Network “->” SIM Card Mode “.
In the” Physical SIM ” mode, a SIM card must be inserted to use the UROZETTA WiFi device. Some SIM cards also need an APN to be setup, which should be setup on the WebUl or App. The external card slot does not support switching SIM cards when the UROZETTA WiFi device is on. If you need to use a SIM card , restart the UROZETTA WiFi device after inserting or extracting an external SIM card .
In the “Virtual SIM “mode, there is no need to insert a SIM card into the external card slot. You can purchase a data package through the UROCOMM App, and you can connect to a local network by turning on the UROZETTA WiFi device when you arrive at your destination.

Device Management

Scan the QR code below to download the Urocomm app. With the app you can easily buy data packages, manage your data, change passwords, set up your device, restart your device, and more.
Buying data packages and managing your data are supported for both U2A and U2B.

About WebUl Change your settings though your web browser

Connect to the WLAN WiFi network of your mobile phone or PC device using Urozetta 2 devices.
Enter the address “urocomm.info” or “192.168.225.1” in the browser, the default password is: 12345678 3. Afterlogging in, you can use the Web Page to change your password and set an APN, etc.

About 4G LTE Mobile Router Specifications

Product Name

Urozetta 2 Cloud Mobile WiFi

---|---|---

Model No.

U2A

U2B

Dimensions

1367013mm

1387114mm

Weight

153g

146g

Display

2.0-inch LCD

240 x 240 resolution

Touch Panel

Yes

Processor

MDM9207,28nm LP Soc process, Cortex-A7, up to 1.3GHZ

RAM

256MB

Storage

512MB ROM

Cloud MiFi

Yes

Bands

LTE-TDD: B41 LTE-FDD: B2/134/B5/B7/B12 WCDMA: B2/B4/B5

LTE-TDD: B41 LTE-FDD: B2/B4/B5/137/1312 WCDMA: B2/B4/B5

WLAN

2.4G IEEE 802.11 b/g/n

Battery

3600mAh lithium battery/Non-removable

Connectivity

USB Type-C 5V2A input

WPS

Yes

Keys

Power key/Reset hole

Protection Level

IP53

Software

linux kernel 3.x

FOTA SW upgrade

Yes

Support APP

Yes

Continuous Working Hours

13 Hours

Working Environment

-10°C — 35°C

Certification

Giteki,PSE,VCCI,CE, WEEEE, ROHS,FCC,CCC,KC

FAQ

How do I change the Wifi name and password?

You cannot change the Wifi name, but you can change the password of the Wifi in the APP.

What should I do when my Phone/Tablet cannot connect with the device?

Make sure the Phone/Tablet’s WLAN is turned on.
Refresh the network list, and search for the Wifi Name of the device.
Make sure to input the correct key.
Disconnect your device from your current network and then reconnect.

What should I do when the device has no internet connection?

Make sure the device status is normal .The signal may be harbors, weaker when in airports, mountain areas, high ways, basements, rural areas and islands. Please restart and try again after moving to a different location.
If you still can not get an internet connection, please contact us through email: [email protected]

What should I do if my device is lost?

If your device is lost accidentally, please contact customer service to freeze your account in time to avoid additional fees.

Why can I not use my device after a SIM card is inserted?

In some countries when you insert a SIM card, you need to manually set an APN (Access Point Name) . If this is the case, please go to the website: urocomm . info or 192.168.225.1 , and enter the password 12345678; After entering the Web UI, go to “Menu”-“Apn”, manually add a network operator APN, and then save the settings.

Warning

Please only use original accessories provided with purchase. Use of unauthorized chargers or other accessories may cause damage to the device and can result in fire, explosions, or other hazards.
If users of the UROZETTA WiFi device use a power adapter to charge the UROZETTA WiFi device, they should purchase a power adapter that meets the requirements of the correspond- ing safety standards or a power adapter that has obtained the quality and safety certification of the country in which it is used.
Please keep the device in a dry and cool environment and do not let the device come into contact with water. Extreme high or low-temperatures may cause damage to the device.
Please do not expose the device to high temperature environments or heating , such as strong sunlight, heaters, microwaves, ovens, or water heaters etc. An overheated battery might cause explosion.
When charging is complete or the device is fully charged, please disconnect the charger from the device and unplug the charger from the power outlet.
The built-in battery is non-removable. Please do not attempt to change or disassemble the battery by yourself. This may result in damage to the battery or the device. The battery can only be replaced by an official authorized service provider.
Notice: Using the wrong model of battery may result in an explosion. Please make sure to dispose of used batteries as instructed.
Device Working Temperature: The device should be kept at a working temperature of -10°C to 35°C. For the user’s safety, please avoid using the device in a high-temperature environment for long periods of time, as this leads a shorter device lifetime. The device will stop charging automatically when the battery temperature reaches 45°C, and shut down automatically when battery temperature is more than 55°C.
When using an external SIM card, self-cutting SIM cards and non standard SIM cards can not be used.
We are only responsible for the function of the device’s official operating system and update system. The use of any other systems or software from unofficial third parties might cause security risks.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference radio or television reception, which can be determined by to turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help:

FCC Radiation Exposure Statement

This device complies with FCC SAR exposure limits set forth
for an uncontrolled environment. SAR compliance for using
the equipment in close proximity to the human body has
been evaluated at 10mm. This equipment must not be co-
located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provide with
antenna installation instructions and consider removing the
no-collocation statement.

Caution!

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Countries:

(BE/BG/CZ/DK/DE/EENE/EL/ES/CY/LV/LT/LU/HU/MT/FR/H AT/ NUAT/PL/PT/RO/SW/SK/FI/SE/UK/TR/NO/CH/IS/LI)

RF EXPOSURE INFORMATION (SAR)

This device meets the government’s requirements for exposure to radiowaves.
- The SAR limit set by the CE is 2.0W/kg
The highest reported SAR values under the CE regulatory for your device are listed below:
- Body SAR: 1.051W/kg

Contact

Service Email: [email protected]

Copyright Notice

Urocomm International Limited. reserve the final interpretation of the UROZETTA trademarks for this product.

For More Surprises: Please visit www.urocomm.com

QR CODE

Documents / Resources

| Urocomm UROZETTA 2 4G LTE Mobile Router [pdf] User Manual
U2A, 2A7R8U2A, UROZETTA 2 4G LTE Mobile Router, UROZETTA 2, 4G LTE Mobile Router, Mobile Router, 4G LTE Router, Router
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual >>