WXM HSSKIA01 SKIPO Folding Scooter User Manual

WXM HSSKIA01 SKIPO Folding Scooter

Product Information

Specifications

• Model Numbers: HSSKIA01, HSSKIB01, HSSKIC01, HSSKID01
• Age Range: 3+
• Maximum Weight Capacity: 50kg
• Compliance: EN71 standard

Product Usage Instructions

Description of the Scooter

The scooter consists of various components including the handlebar post, handlebar clamping lever, front arm with handlebar and wheel, lock handle, platform, brake, wheels, and kickstand.

Assembly and Adjustment of the Scooter

1. Tilt the frame clamping lever (F) and release the lock by pulling the handle (E).

Handlebar Height Adjustment

1. Tilt the handlebar post clamping lever (B).
2. Adjust the height of the handlebar to one of the three available levels.

Braking

To reduce speed or stop the scooter, gently apply pressure to the brake (H).

Cleaning and Maintenance

1. Regularly inspect all components for wear and tear.
2. Use a silicone-based lubricant for moving parts when necessary.
3. Remove excess lubricant with a clean cloth.
4. Keep moving parts free from dirt, sand, or dust to prevent damage.
5. Store the scooter in a clean and dry place when not in use.

Environment

After discontinuing use, please dispose of the product in accordance with local waste disposal regulations to protect the environment.

Frequently Asked Questions

Q: What should I do if I encounter issues during assembly?
A: If you face any difficulties during assembly, please refer to the user manual for detailed instructions or contact our customer support team for assistance.

Q: Can adults also use this scooter?
A: The scooter is designed for children aged 3 and above with a maximum weight capacity of 50kg. It is recommended for children within this age and weight range.

MODEL: HSSKIA01, HSSKIB01, HSSKIC01, HSSKID01

FOLDING OUT THE PARKING LEG

Dear Customer!
Thank you for choosing Kidwell,
Our highest priority is the safety of your child and the creation of beautiful memories. We hope you will enjoy our product, in case of any questions please contact us at: bok@kidwell.eu
Please read through the entire manual carefully and follow all instructions. Before you start using our product make sure that all of the features are working as intended and are secure (fasteners, nuts, bolts, screws, etc.). The assembly must be performed by an adult. Failure to comply with the instructions and safety warnings could result in serious injuries.

NOTE: Remove and discard all packaging elements included with the product so they are out of the reach of the child (e.g. cardboard pieces, plastic film/bags, etc.). Risk of injury, e.g. choking hazard

NOTE: This product is for DIY assembly.

CAUTION!
READ AND KEEP THIS MANUAL FOR REFERENCE.

WARNING:

• Ensure that children are away from the location where the product is assembled or disassembled to avoid injury.
• Never leave children unattended.
• The product is suitable for children over 3 years of age and weighs a maximum of 50 kg.
• Do not operate in traffic.
• Use the product strictly under supervision of an adult.
• This toy must be used with caution as it requires adequate skills to avoid accidents or collision resulting in injury of the user and/or third parties.
• When using this toy, make sure that the child has the skills necessary to operate the product safely and can use the braking system.
• Wear protective equipment (helmets, gloves and knee and elbow protectors).
• Do not use the scooter if any part is damaged or missing.
• Before using this product, make sure that all parts are properly secured and all fasteners are engaged.
• Do not use any accessories or spare parts not recommended by the manufacturer.
• The scooter is intended for operation by one person and must not be ridden by more than one child at the same time.
• Use the toy on flat, level surfaces without obstacles and away from stairways.
• Always make sure that all parts fit as specified in the product manual.
• Do not attempt to repair or modify the product. Only qualified service technicians are authorised to do this.
• Routinely inspect the product for all damaged parts and the security of screws, nuts, etc.
• Do not install any objects [to the product] which could be dangerous to its proper performance or any objects that could injure children.
• If damage is found, discontinue use immediately
• and keep the product out of child’s reach until the product is repaired.
• Do not use the product in any manner not specified in the manual.
• It is unacceptable to use the scooter on roads where there is traffic, or any other roads on which motor vehicles travel and other places that pose a risk to the health and life of children.
• Do not operate the product on surfaces that are wet, slippery, sandy, gravely, etc. which can cause the risk of losing balance.
• Do not operate the product after dark, in mist or other weather which reduces visibility.
• Before using this product, make sure that the child understands how to operate it correctly – especially how to make turns and stop the scooter.
• Do not leave the product exposed to train, snow or heat.
• This product must be assembled by adults.

The product complies with the EN71 standard

Drawings and photos are for illustrative purposes only. The actual appearance of the product may differ from the visuals in the instructions.

PRODUCT CHARACTERISTICS

• Age range: from 3 years old.
• Maximum load – 50 kg.
• Lightweight aluminium construction.
• Quick folding system.
• 3 levels of handlebar height adjustment (69 /74 /79 cm).
• Non-slip platform.
• Durable 120 mm diameter polyurethane wheels with integrated LED lights.
• High-quality ABEC-7 bearings.
• FLEX BRAKE type brake.
• Ergonomic rubber grips.
• Folding kickstand for easy parking.
• EN-71 compliant.

DESCRIPTION OF THE SCOOTER

• A Handlebar post
• B Handlebar clamping lever
• C Handlebar post ends
• D Front arm with handlebar and wheel
• E Lock handle
• F Frame clamping lever
• G Platform
• H Brake
• I Wheels
• J Kickstand

ASSEMBLY AND ADJUSTMENT OF THE SCOOTER

1. Tilt the frame clamping lever (F) and release the lock by pulling the handle (E).
   Then, unfold the front arm with handlebar and wheel (D) until an audible anti- fold lock engages. For added security, push the frame clamping lever (F) in as far as possible. NOTE: If the clamping lever is too loose or difficult to tighten, adjust the pressure with the nut.

2. Clip the handlebar post ends (C) out of the plastic clips and mount them on either side of the handlebar post (A). Ensure that the lock buttons pop into the dedicated holes located in the centre of the handlebar (A). Also be careful not to cut the flexible rubber attached to the post ends.

HANDLEBAR HEIGHT ADJUSTMENT

1. Tilt the handlebar post clamping lever (B).
2. Adjust the height of the handlebar to one of the three available levels. Note the lock button, which must appear in one of the three lock holes, depending on the set handlebar height.
3. Tighten the handlebar clamping lever (B) as far as possible.
   NOTE: If the clamping lever is too loose or difficult to tighten, adjust the pressure with the nut.

BRAKING

To slow down or stop the scooter, gently press the brake (H).

UNFOLDING THE KICKSTAND

Tilt the kickstand (J), located on the underside of the platform, to an upright position and rest the scooter on the kickstand. Remember that the kickstand only works on level and firm ground. To continue riding, the kickstand must be placed in a horizontal position adjacent to the platform.

CLEANING AND MAINTENANCE

1. Clean the cot with a damp cloth using a solution of water and soap.
2. Do not use hard brushes or sharp-edged objects to clean the product.
3. Do not use aggressive chemicals to clean the dirt.
4. When the product is not used, it should be kept in a room without moisture and extreme temperatures.
5. If individual components have to be replaced, use original parts or parts authorised by the manufacturer.
6. Frequent use of adjusting parts leads to slow wear and tear of these components. When they lose their properties, replace them as soon as possible.

ENVIRONMENT

For environmental reasons, we kindly ask of the disposal of this product at a specifically for this purpose designed disposal site which is in accordance with local legislations.

LIMITATIONS OF WARRANTY

The warranty does not cover destruction or loss of individual elements due to falling, abrasion, incorrect assembly and use which is not in accordance with the user manual.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>