Merritt Sheridan 9111-1W One Light Wall Sconce Instruction Manual
- June 2, 2024
- Merritt Sheridan
Table of Contents
**Merritt Sheridan 9111-1W One Light Wall Sconce Instruction Manual
**
INSTALLATION INSTRUCTION
WARNING: To avoid risk of electrical shock, be sure to shut off power while installing or servicing this fixture.
NOTE: We advise calling a qualified electrician when making the wire connections to the junction box.
- Carefully unpack your new fixture and lay out all the parts on a clean surface.
- Thread the 2 mounting screws through the mounting screw holes from the back of the mounting bracket.
- Attach mounting bracket to the outlet box using 2 box screws. The side of the mounting bracket marked “GND” must face out.
- Follow the wiring instruction carefully as detailed below.
- Attach the fixture main body onto the outlet box by protruding 2 mounting screws through the mounting screw holes on the fixture cover plate (A), then tighten with 2 ball nuts (B).
- Assembly the shade (C) onto the socket sleeve (D).
- Install the bulb into the socket. BULB(S) NOT INCLUDED. DO NOT EXCEED THE MAXIMUM WATTAGE RATING.
- Installation is now complete. Turn on power.
CONNECT THE ELECTRICAL WIRES AS FOLLOWS:
- Connect the black wire from the fixture to the black (HOT) house wire with wire connector.
- Connect the white wire from the fixture to the white (NEUTRAL) house wire with wire connector.
- Connect the ground wire to the house ground wire (GREEN OR BARE COPPER). Or attach the bare copper fixture wire to the green ground screw on the cross bar.
- Tuck the wire connections neatly into the junction box.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>