TOOLGANIZE TG-02 4-STATION Garden Tool Storage Rack Instruction Manual

May 15, 2024
TOOLGANIZE

TOOLGANIZE TG-02 4-STATION Garden Tool Storage Rack

Product Information

Specifications

  • Model Number: TG-02 4 STATION
  • Dimensions (WxHxD): 1000mm x 240mm x 75mm
  • Garden Tool Storage Bays: 4
  • Weight (Net): 4.4kg

Introduction

This rack is designed for wall mounting and can store up to 120kg of garden tools, with a maximum of 30kg per station.

Contents

  • A1 Garden Tool Rack x 1
  • A2 Masonry Anchors x 3

Maintenance

Regularly check that the rack mountings are securely fitted and not compromised. Do not use chemical or abrasive cleaners on the surface, only wipe clean with a damp cloth.

Disclaimer

Richard Aiden Ltd. reserves the right to alter data, specifications, and components without prior notice. The company does not accept liability for incorrect use of the product. The warranty is a lifetime guarantee from the purchase date, requiring proof of purchase for any claims. This guarantee does not cover normal wear to the painted finish.

Product Usage Instructions

Safety Guidelines

It is crucial to follow these safety guidelines for proper usage of the garden tool storage rack:

  • Ensure all health & safety and local authority regulations are followed during assembly and use.

  • Mount the rack on a flat, solid wall like brick or block that can support the weight when fully loaded.

  • Affix the rack securely to the wall at a suitable height to minimize injury risks.

  • Avoid wall mounting alone; seek assistance or use manual handling equipment.

  • Keep children and unauthorized persons away from the working areas.

  • Do not use the rack for purposes other than storing garden
    tools, avoid outdoor placement, getting it wet, or using it in damp locations.

  • Avoid cleaning with solvents or abrasives that may damage the finish.

  • Ensure proper assembly and installation before use to prevent overloading.

Installation Steps

  1. Prepare the necessary tools and components.
  2. Select a suitable location on a flat, solid wall.
  3. Securely affix the rack to the wall using the provided fixings.
  4. Check the stability of the installation.
  5. Organize your garden tools within the storage bays.

Frequently Asked Questions

Q: Can I use this rack outdoors?

A: No, it is recommended not to site the tool rack outdoors or in wet/damp locations to prevent damage.

Q: What is the weight limit per station?

A: The maximum weight per station is 30kg, with an overall capacity of up to 120kg for the entire rack.

GARDEN TOOL STORAGE RACK MODEL: TG-02 4-STATIO

Thank you for purchasing a quality Toolganize product which is manufactured from 5mm thick &10mm diameter cold-rolled steel to a high standard, this product, if used according to these instructions, will provide a lifetime of trouble-free use. This rack comes with a lifetime structural guarantee as standard ***.
We are a small UK based family business and take the complete satisfaction of our customers extremely seriously, please kindly leave an honest product review on our Amazon listing page – many thanks!

IMPORTANT: PLEASE STUDY THE INSTRUCTIONS CAREFULLY AND NOTE THE SAFETY RECCOMENDATIONS, AND WARNINGS. USE THE PRODUCT CORRECTLY FOR THE PURPOSE FOR STORAGE OF GARDEN TOOLS. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP THIS INSTRUCTION SHEET SAFE FOR FUTURE REFERENCE.

SAFETY

  • WARNING! Ensure all health & safety, and local authority regulations are followed when assembling and using this rack.
    Position in a suitable, clean, uncluttered area where it will not cause an obstruction. Ensure adequate lighting.

  • WARNING! Mount the rack on a flat and solid wall such as brick or block that is strong enough when fully laden.

    • The rack should be firmly affixed to the wall using the fixings provided, at a suitable height that minimises risk of injury.
    • DO NOT attempt to wall mount the tool rack on your own. Obtain assistance or use manual handling equipment. Please keep children and unauthorised persons away from the working areas.
    • DO NOT use the tool rack for any purpose other than that for which it is designed and do not site outdoors.
    • DO NOT get the tool rack wet or use in damp or wet locations or areas where there is condensation.
    • DO NOT clean the tool rack with solvents or abrasives which may damage the finish.
    • DO NOT overload, and ensure that the tool rack is firmly assembled and properly installed before use.

INTRODUCTION

This rack is supplied ready for wall mounting and for the storage of up to 120kg of garden tools – 30kg per station max.

SPECIFICATION

  • Model Number: ………………………………………… TG-02 4 STATION
  • Dimensions (WxHxD) ………………. 1000mm x 240mm x 75mm
  • Garden toolstorage bays………………………………………………………..4
  • Weight (Net) …………………………………………………..…..4.4kg

TOOLGANIZE-TG-02-4-STATION-Garden-Tool-Storage-Rack-
FIG-1

CONTENTS

TOOLGANIZE-TG-02-4-STATION-Garden-Tool-Storage-Rack-
FIG-2

FITTING

  • Step 1. Carefully unpack rack and anchors from cardboard packaging taking care not to damage rack painted surface if using a sharp blade.
  • Step 2. Chose a suitable location point on wall, Brick, Block or Concrete (Can also be mounted to timber studs with suitable M8 wood anchors).
  • Step 3. Mark out 3 x mounting points on 400mm centres using spirit level, tape measure and pencil, or mark positions through rack holes.
  • Step 4. Drill 3 x Holes into masonry with an 8mm diameter Masonry bit to a minimum depth of 60mm (with hammer action selected).
  • Step 5. Blow out or clean debris from holes and hammer in the masonry anchors until approximately 15mm is left protruding from the wall.
  • Step 6. Remove bolts and washers and lift rack into position, loosely screw on the three M8 Washers and Nuts.
  • Step 7. Torque up bolts to 20Nm which will securely affix the rack to the wall – the rack is now ready to store all your garden tools!

TOOLGANIZE-TG-02-4-STATION-Garden-Tool-Storage-Rack-
FIG-3

MAINTENANCE

  1. Check rack mountings are firmly fitted on a regular basis, and that the security of the rack is not compromised.
  2. DO NOT use chemical or abrasive cleaners as this may result in damage to the surface. Only wipe clean with a damp cloth.
    Richard Aiden LTD, 71-75 Shelton Street, Covent Garden, London, WC2H 9JQ. www.richardaiden.com
    ENVIRONMENTAL PROTECTION
    METAL RECYCLES FOREVER – PLEASE RECYCLE

Note: Richard Aiden Ltd. continually improves its products, we reserve the right to alter data, specifications and components without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is Lifetime from purchase date, proof of which is required for any claim. *** Does not apply to normal wear to painted finish.

Richard Aiden LTD, 71-75 Shelton Street, Covent Garden, London, WC2H 9JQ.

www.richardaiden.com
TG-02 4-STATION Issue 6 03/06/2023
Customer Service: support@richardaiden.com

© Richard Aiden LTD

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals