MIUFLY S2 PRO Body Camera User Guide

MIUFLY S2 PRO Body Camera
User Guide

About this Guide

The content in this document is for information purpose and is subject to change without prior notice. We have made every effort to ensure that this User Guide is accurate and complete.
However, no liability is assumed for any errors or omissions that may have occurred.
The manufacturer reserves the right to change the technical specification and accessories without prior notice.
Caution
Do not expose battery being placed in high temperature environment. If battery leaks or bulges, stop to use.
Risk of explosion if battery is placed by an incorrect type.
Dispose of used batteries according to the instructions.
Never replace the battery on your own. Doing so may cause the damage or explosion. Please have the dealer do it for you.
Do not put the LCD displayer or lens under the sunshine.
Note
A specific emission frequency may influence the image quality.
Please try a few times of video-taking test before you formally use this product in order to be familiar with this product.
Always full charge the battery before use.
Never dismantle, crush, or pierce the product, or allow the product to short- circuit. Please persuade for professional assistance if the product doesn’t work properly.
Before you start using this product, it is assumed that you agree to the above statement.

Introduction

Product Overview
MIUFLY S2 PRO Body Camera is ruggedly designed to provides law enforcement, security and emergency personnel with super Full HD 1512p video recording capabilities, and one-button recording and activation. When worn on the front of clothing, an ultra-wide 140° field-of-view lens captures what happens in the field as accurate information for further analysis. Featuring a 32GB (64GB) internal memory, pre-record buffering, importance tagging, and integrated Infrared LEDS for night vision, MIUFLY S2 PRO is equipped to perform in any conditions. With full featured and adaptable operation, MIUFLY S2 PRO can record video and audio simultaneously, or audio only for suspect interrogations and victim/witness statements. MIUFLY S2 PRO is fully configurable and offers multiple recording qualities, super full HD 1512p video down to 864×480 resolution, giving users the options to adjust the recording quality according to their storage capabilities.
MIUFLY S2 PRO can also take up to 20 high-resolution snapshots, which, together with video, can be viewed on backlit, 2 inch LCD color screen. Security protocols of the device are secure to prevent accidental deletion of evidence or modification of system settings. Video footage is also digitally watermarked with the user ID, time and date, ensuring the authenticity of collected video of the event. The internal GPS receiver provides automatic location tagging of video- and still-captures, offering irrefutable substantiation of where and when the audio and video were recorded.
The MIUFLY S2 PRO has voice control function, and users can awaken voice control through the wake-up word “muifly”. They can control video/audio recording, and photography functions of the law enforcement instrument by controlling keywords.
Box contents

• MIUFLY Body Camera
• Charging Dock
• USB Cable
• Wall charger
• Crocodile Clip
•  360 Degree Rotatable Clip
• User Manual
• Epaulette Clip

Product Diagram

recording
Infrared LED| Records clear image in low light situation. Enable Clear face view with up to 10 meters
Flash Light| Hold Photo button to turn on/off white light
Speaker| Built-in speaker
Up key& Change Resolution| a). Press to scroll up in menu mode
b). In play mode, hold to zoom out the playing image
c). In play mode, press to rewind video
d). Hold to change resolution between 1080P and 720P
Confirm Key| a). Press to make a selection in menu mode
b). In play mode, press to pause/resume video or audio playback.
c). In standby mode, press to review files.
Menu & Down key| a). Press to enter into menu mode
b). Press to scroll down in menu mode
c). In play mode, hold to zoom in the playing image
d). In play mode, press to fast forward video
FN key| a). Press to tag importance to audio/video file when camera is on recording
b). Press to switch between video, photo and audio when playback files
c). Hold to turn IR light on/off;
One Press Audio Recording| a). Press to start/stop audio recording
b). Hold to power up camera and start audio recording immediately when camera is powered off.
c). Hold to turn on/off white flash light
One Press Photo Shot| a). Press to take pictures in standby mode
b). Press to take a single snapshot image while in video recording
c). Hold to turn on/off white light
One Press Video Recording| a). Press to start/stop recording
b). Hold to power up camera and start video recording immediately when camera is powered off.
USB Port| Connects to USB cable for charging or connection to PC
PS: optionally connects to external camera
Reset Port| Inside the USB port, press to reset the device
Power ON/OFF Button| a). Hold for 3 seconds to turn on/off camera.
b). Press to enter or exit screen saver when camera is on
Status Indicator LED| Green: camera is powered up and in standby mode, not recording
Flashing Red: camera is recording video
Flashing Yellow: camera is recording audio only
Status Indicator LED| RED: Charging Status
Flat GREEN when device is fully charged
Charging Base Port| Connect to charging dock to charge the camera

LCD Interface:

Recording Indicator| Red blinking record status icon indicates camera is recording,
---|---
Recorded Time| Recorded time of current clip
Battery Level| Current battery charge level
Device and Officer ID| Assigned camera and Officer IDs
Remaining Recording Time| Estimated recording hours remaining
Available Memory| Internal SD Card capacity: Free space/Total capacity

Main Menu Optional Detail

To enter the setting menu:

1. Press Menu ( ) button and then enter a password.

2. Enter the password by using the following commands:
   Press Scroll Up ( ) button to change the character to the previous letter or number.
   Press Menu ( ) button to change the character to the next letter or number.
   Press OK ( ) button to move to the next character
   PS: The default password is 000000.

3. After selecting the last character, press OK ( ) button to enter the setting menu.

To navigate the settings menu:

• Press Menu ( ) button to select next setting or option.
• Press Scroll Up ( ) button to select the previous setting or option.
• Press OK ( ) button to move to confirm your selection or enter the sub-menu.
• Press Power ( ) button to save setting and return to the previous menu.

Following is a list of the available settings and options. The bold items are the default options.

Setting| Description|

Options

---|---|---
Resolution| The image resolution for video| 2688×1512 30P 2560×1440 30P
2304×1296 30P 1920×1080 30P
1280×720 30P 864×480 30P
Coding Format| The coding format of video files| H.264, H.265
Quality| The quality of the image for video and photo files.| S. Fine, Fine, Normal
Pre-record| When on, a certain time (depends on the video resolution) will be combined into the recorded video before record button is pressed to start recording.
When off, video start until the Record button is pressed to start recording.| Off, On
Post Record| The amount of the time the camera waits to stop recording video after you press the Record button.| Off, 5 secs, 1 min, 10 mins, 20 mins, 35 mins
Dewarp| When on, video distortion correction will be corrected, with more power consumption.| Off, On
CarDV Mode| When on, camera will power up automatically and start video recording when it is charged. Camera will power off as it normally does when it is disconnected from the power source.| Off, On
Loop Recording| When on, camera will overwrite the oldest video file with the most current video file once its memory is full. This setting can be selected only when car DVR mode is on.| Off, On
Split Time| While recording video, the camera will automatically split its recording into files of this length.| 1 min, 3Mins, 5 Mins, 10 Mins, 15 Mins, 20 Mins, 30 Mins, 45Mins
Megapixels| The image resolution for photos| 5M (3008×1692 16:9) 12M (4608×2592 16:9)
20M (5984×3366 16:9) 25M (6656×3744 16:9)
30M (7296×4104 16:9) 40M (8448×4752 16:9)
Burst| The number of images captured when you take a photo.| Off, 2, 3, 5, 6, 8, 10, 15, 20
Record Cam| When choose Ext., it will only record the external mini cam. When choose both, it will record both the main cam and mini cam.| Single., Dual
Self Timer| The amount of time the camera waits to take a photo after you press Snapshot button.| off, 5 sec, 10 sec，20 sec, 30 sec, 1 minute
Slideshow| When on, viewing photo file will start a slideshow where each photo will be shown for around 5 seconds.| Off, on
Infrared| When set to manual, you will need to hold Snapshot button to turn IR LEDs on/off. When set to Auto, these lights will activate automatically based on the light sensor’s reading.| Manual, Auto
Motion Detect| When on, camera will start recording when front movement is detected by the lens.| Off, On
Recording Warning| When on, you will hear a voice confirmation when you start recording. When off, voice confirmation is disabled.| Off, On
Video mute| When on, recorded video files will not record sound.| Off, On
GPS| When GPS is on, position of video will be recorded and can be reviewed by GPS player.| Off, On
Time Zone| Adopt local time in real time zone| -12 to +12, default +0
Language| The language of the text in camera interface| English
Screen Saver| The amount of the time the camera can be idle before deactivating the display to conserve power.| Off, 30 sec, 1 min, 3 Mins, 5 Mins
LCD Brightness| Screen lighting to view| High, Medium,Low
Auto Power off| The amount of the time the camera can be idle before powering off.| Off, 30 sec, 1 min, 3 Mins, 5 Mins
Power saving| When on, will enter power saving mode| On, Off
LED Light| When on, indicator LED will tell the status of the camera; When off, camera is entering covert mode| On, Off
White Led| White Led light to offer light source| On, Off
Key Tone| When on, camera will play a tone each time you press a button. When off, tone is disabled.| On, Off
Motor| When on, there will be no vibration prompts during startup, shutdown, video recording, and recording.| On, Off
Volume| The volume of camera speaker. This affects the loudness of video playback, audio playback, the key tone, record warning, and any other sounds played by camera. This doesn’t affect the volume of the recorded video or audio files themselves.| 0-12
Time Setup| Adjust time to real location| yyyy/mm/dd   :
ID setting| User is able to set Device SN and Person SN| Alphanumeric characters
Password| If password is on, user needs to enter password to get access to setting and connection to PC| On, Off
Change User Password| Password can be set or changed| Alphanumeric characters
Default setting| Use this to return camera to its original settings. This does not erase the memory.| O (Yes), X (No)
FW Name| Firmware version|

Operation

4.1 Power on/off
hold Power button for 3 seconds to start up and enter standby mode; at any mode with holding Power button for 3 seconds, camera will shut down.
PS: at standby / video recording / audio recording mode, short press power button , screen saver can be on/off.
4.2 Audio recording
In standby mode, press audio Recording Button for audio recording. Camera will beep, and vibrate once and LED indicator on the top turns yellow and flashes. Press again audio Recording Button to stop audio recording (camera vibrates twice) and save the file. In audio recording mode, short press FN button to remark the file as an important file, the yellow star icon will appear at the right side on screen.
4.3 Photo shooting
At standby mode, press photo button to take photos.
4.4 Video recording
In standby mode, press video Recording Button to start video recording. Camera will beep, and vibrate once and LED indicator on the top turns red and flashes. Press again video Recording Button to stop video recording (camera vibrates twice) and save the file. In video recording mode, short press FN button to remark the file as an important file, the yellow star icon will appear at the right side on screen.
4.5 One-button video recording
At power-off mode, hold video Recording Button for three seconds for powering on the camera and start video recording immediately.
4.6 PIV (picture in video)
In video recording mode, press photo button   to capture photo.
4.7 Zoom
In standby or video recording mode, hold Scroll Up button and scroll down button to zoom in and out the image.
4.8 IR night vision
Under dark circumstances, infrared LED will help to record clear image or video.
In standby mode, PRESS Menu button to navigate. Find option
【Infrared】, PRESS OK butto n to enter sub-menu: Manual & Auto, press OK button to select.
1) Auto infrared mode:
In low light situations (1 Lux), 2 IR LEDS will be turned on automatically, camera switches on infrared filter lens, video image turn black and white. Otherwise, when circumstance brightness grew up, IR LED turns off, and image becomes colorful again.
2)Manual infrared mode:
When night vision is needed, hold FN button to switch to Infrared mode, IR LEDS will be turned on, black and white image. hold FN button again to turn off IR LEDS, image becomes colorful.
4.9 White LED
In standby or video recording mode, hold photo button to turn on/off white LED.
4.10 Playback
In standby mode, press OK button to enter playback mode. There are Video, Photo, and Audio options, FN button to select, and press OK button to confirm the selection, hold on OK button can delete file.

1. In video file playback mode, PRESS OK button to pause/resume playback; PRESS scroll-Up button to rewind, PRESS Scroll-down button to fast forward, then PRESS OK button to play normally.
   You can fast forward or rewind 2x, 4x, 8x, 16x, 32x, 64x.

2. In photo file playback mode, hold and button to zoom in and out the image. Adjustable is X1.0～X10.0. In the zoom in and out image, short press and button to move the image to right or left side.

4.11 Reset
In any case the camera is frozen, use a pin to reset and restart the camera.
Reset button is inside USB port.
4.12 Device ID/ User ID
In standby mode, PRESS Menu button to enter settings. Find [ID setting], PRESS OK button to select, then the Device & Person SN interface will show up, 5 characters for device ID and 6 characters for person ID.
PRESS scroll-Up button or Scroll-down button to choose a character, then PRESS OK button to select.
4.13 Time Setting
In standby mode, PRESS Menu button to enter settings. Find Time bar, for example, 2008/02/02 07:40. PRESS OK button and enter the password, then users can change the date and time.
Press scroll-Up button or Scroll-down button to choose a character, then PRESS OK button to select.
4.14 Video/Picture/Audio files can be deleted by holding on OK button or on your PC/laptop.
After being connected to PC, password interface shows up, please enter the password(default password is 000000)Press the (OK) button 6 times, the camera will be recognized by the computer as Extra drive. User can go to camera folder and delete those files not needed.
4.15 Charging
When camera batter is low, the battery icon will flash in the display, and you will hear a alert tone. When this happens, charge the camera. While camera is charging, indicator lights RED and flat GREEN after camera is fully charged. It will take approximately 4 hours to fully charge the camera.
Charging methods:

1. Use a USB cable to connect camera’s USB port to USB port on your computer (powered on) or USB power adapter (connect to a power outlet)
2.  Attach camera to the docking bay. Use a USB cable to connect the docking bay to USB port on your computer (powered on) or USB power adapter (connect to a power outlet)
   NOTES: Use the original wall charger (connect to a power outlet)

4.16 GPS tag
When GPS turns on, camera will record specific location information along with body camera footage, and the tags are stored in the video metadata, pinpointing the location when the footage is reviewed.
There will be GPS coordinate (longitude and latitude) showing up in the upper right corner of LCD screen when GPS signal is received.

You can download the GPS player here :
http://www.miuflybodycamera.com（On the FAQ&Support page）
4.17 VOICE CONTROL YOUR CAMERA
In standby mode, you can directly start video recording, audio recording, and photo taking functions through voice control. Say “Miufly” and the camera will vibrate to indicate that the voice control function has been activated. Then say the command to start recording. The voice control commands are as follows. Say “Miufly , take video” to start video recording. Say “Miufly , take audio” to start audio recording.
Say “Miufly , take picture” to take photo. voice control distance : the control distance can up to 13 ft in a quiet indoor environment. In a noisy outdoor environment, the voice control distance is about 6 ft.
Note :

1. The success rate of voice control will be affected when the ambient noise is higher than 70 decibels. It is recommended to use the button control in a noisy environment.
2. In rainy and snowy weather, the microphone hole of the camera may be blocked by rain and snow, so that the camera cannot hear voice commands. It is recommended to use buttons to control.
3. In order to prevent others from interrupting the recording through voice control, we have not enabled the function of voice control to stop recording. If you need the function of voice control to stop recording, please contact us.

Troubleshooting

5.1 Cannot enter Menu of Body Camera
A. Stop Recording prior to entering Body Camera’s menu by pressing Record button.
B. Body Camera supports a six-character alphanumerical password format.
Prior to entering menu of Body Camera, ensure that correct password is entered.
5.2 IR are not turning on
A. IR turn on automatically only if they’re set to Auto in the Infrared menu.
Otherwise the Infrared will remain disabled.
5.3 Indicator LEDS are not lit
A. If the camera is powered up and Status LEDS are not lit go to Body
Camera’s menu and select LED Light menu option. Ensure that it is set to ON.
5.4 Body Camera only records for short periods of time
A. In event of Body Camera recording for brief moments then shutting off, please ensure that menu option Auto Power OFF is set to OFF.
5.5 How do I delete videos on the body camera?
A. The recorded videos, pictures and sound recording can be deleted by holding on the OK button or on the computer via USB cable.
Note: Do not modify the file name directly on the camera memory, it will cause the file to be lost or the system to crash.

If you have any questions, please contact us

Email:wendy@miuflybodycamera.com

References

• MIUFLY – MIUFLY BODY CAMERA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>