MAXITAL COMPONENTS MAXT230HD Digital Terrestrial Decoder User Manual
- May 15, 2024
- MAXITAL COMPONENTS
Table of Contents
MAXITAL COMPONENTS MAXT230HD Digital Terrestrial Decoder
Important safety instructions
- Beware of all warnings.
- Do not use this device near water. Clean only with a dry cloth.
- Do not block ventilation openings, install according to the instructions.
- Do not install near heat sources such as radiation, heat sources, stoves or other appliances (including
- amplifiers) that produce heat.
- Do not disable polarized plug safety measures. If the supplied plug does not fit into the socket, consult an electrician to replace the obsolete outlet.
- Protect the power cord from being stepped on or pinched, in particular in plugs, containers of competence and where they leave the appliance.
- Use only the included accessories specified by the manufacturer.
- Disconnect this device during lightning storms or when it is not used for long periods.
- Only refer to the service personnel qualified for maintenance.
- Maintenance is necessary when the appliance has been damaged in any way for example: damaged power cord or plug, spilled liquid or objects fallen over the appliance, exposure to rain or other liquids, the appliance is not working properly or has fallen to the ground.
- The main plug is used as a disconnect device and must remain easily usable.
- Ventilation should not be hindered by covering ventilation openings with objects, such as newspapers, tablecloths, curtains, etc.
- No source of free flame, such as lit candles, should be placed on the device.
- Attention must be paid to the environmental aspects of battery disposal.
WARNING
To reduce the risk of fire or electric shock, do not expose this device to
rain or moisture. Batteries should not be exposed to excessive heat such as
sun, fire or the like.
- The symbol indicates dangerous voltages within this unit that pose a risk of electric shock.
- The symbol indicates important instructions for use and maintenance in the literature that accompanies this unit.
- This symbol indicates that the product incorporates a double insulation between dangerous network voltage and user-accessible parts. Use only original spare parts.
Attention
A malfunction may occur and must be restored by the user when the device is in
electrostatic circumstances
Main features
- Fully comply with DVB-T2 e H.264, AVC, H.265/HEVC, MPEG4, MPEG2 standard
- HDMI output (up to 1080i/p)
- EPG display present/next TV program support
- Supports at 7 MHz and 8 MHz software setting
- PAL and NTSC Auto Switch
- Support VBI&OSD Teletext, subtitles, LCN
- 1 Scart output
- Multi-language support
- Autoscan /Manual
- Up to 4000 channels
- Parental Control
- 4-digit LED display
- USB support for software update, optional Media Player & RF modulator function.
Package content
Before installing the product, make sure you have the following.
- DVB-T2 Decoder x1
- Remote Control x1
- User’s Guide x1
- AAA Battery x2
Connections
For a basic connection from the decoder to the TV, use the connection described below using the SCART adapter. For the highest quality connection use a direct HDMI connection, see below.
Installation
After all connections have been made correctly, turn on the TV and make sure
that the receiver is connected to the power supply. Press the power button to
turn on the handset. If you are using the handset for the first time or are
restored to Factory Defaults, the main menu will appear on the TV screen.
- Select [OSD Language] and press RIGHT/LEFT to select a language
- Select [Country] and press RIGHT/LEFT to select your country of residence
- Select [Channel Search] and press RIGHT or OK to start the automatic channel search
- Once you’ve completed channel tuning, you’re ready to watch TV
Basic operation
Manage program settings
Key MENU [Program]. The menu offers options to adjust the program management
settings. Select an option and press OK or RIGHT to adjust that setting. Press
the EXIT button to exit the menu.
Changing the program
To change program preferences (block, skip, favourite, move, or delete), you
must go to the Edit Program Menu. This menu requires a password to sign in.
Enter the default password ‘000000’.
Set favourite program
It allows you to create a shortlist of favourite programs that you can easily
access.
View favorite program
Press the FAV button and the favourite menu will appear.
Delete a TV or radio show
Select the program, and then press button 4 of the remote control. Press OK to
delete the program.
Skip TV or radio program
Select the program you want to ignore and press key 2 of the remote control.
To confirm and exit the menu, press ESC.
Move a TV or radio show
Select your favourite program, and then press key 2 of the remote control.
Press Up/Down to move the program. Press OK to confirm.
Lockout program
You can block programs that are selected for restricted viewing. Select your
favourite program, and then press button 3 of the remote control. The lock
symbol appears. The program is now marked as locked.
EPG (Electronic Programme Guide)
The EPG is a TV guide that shows programmed programs 24 hours in advance for
each tuned channel. Press the EPG button on the remote control to access the
guide.
Order
Sort channels by the following options: [LCN] – Sort channels in ascending
order; [Name] – Sort channels alphabetically; [Service ID] – Sort channels by
station; [ONID] – Sort channels by frequency
LCN (logical channel number)
Set LCN on or off.
Video setting
To access the menu, press MENU and select [Picture]. The menu provides options
for adjusting video settings. Press Up/Down to select an option and press
RIGHT/LEFT to adjust that setting. Press ESC to exit the menu.
Channel Search
- To access the menu, press MENU and select [Channel Search].
- The menu offers options to adjust search channel settings.
- Select an option and press RIGHT/LEFT to adjust the settings.
- Press ESC to exit the menu.
Auto Find
Automatically search and install all channels. This option overwrites all
preset channels.
Manual Search
Manually search new channels. This option adds new channels without changing
the list of current channels.
Setting the time
To access the menu, press MENU and select [Time]. The menu provides options
for adjusting time settings.
Press Up/Down to select an option and press RIGHT/LEFT to adjust the setting.
Press ESC to exit the menu
Option
To access the menu, press MENU and choose [Option]. The menu offers options to
adjust the menu language, subtitle language, and audio language. Select an
option and press RIGHT/LEFT to adjust the setting. Press ESC to exit the menu.
System setup
- To access the menu, press MENU and choose [System]. The menu provides options for adjusting system settings.
- Press THE UP/DOWN BUTTON to select an option and press LEFT/RIGHT to adjust the setting.
- Press ESC to exit the menu.
USB
To access the menu, press the MENU button and select [USB]. The menu offers
options for playing music and photo files, and can support MP3, WMA, JPEG, and
BMP files. The drive will only support the USB device with FAT file system and
FAT32. It will not support the NTFS file system.
Note
- We cannot guarantee compatibility (operation and/or power) with all USB storage devices and we take no responsibility for any data loss that may occur when connected to this drive.
- Some USB devices may not be recognized correctly.
- Even when they are in a supported format, some files may not play or appear depending on the content.
Front and back panel
Front panel Guide
- USB 2.0 Port: data input from USB storage devices.
- POWER BUTTON: used to turn on/off the main power supply.
- CH+/CH-: use to change channels without using the remote control.
- LED DISPLAY WINDOW: used to display channel number.
Rear panel Guide
- RF IN: This socket connects to your external Aerial.
- TV SCART: This socket connects to your TV.
- COAXIAL: digital Audio Coaxial output jack
- HD OUT: high-definition audio and video output used to connect to a HDMI device
- LAN: ethernet port
- Power cord cable
REMOTE CONTROL
Please read the instructions on the back of the remote control to program the
remote control for TV control.
Fte Maximal Italia srlu
via Edison 15, 42049 Calerno (RE), Italy
info@maxital.it |
www.maxital.it
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>