better bathroomsa BT01 Chrome Exposed Bottle Trap User Manual
- May 15, 2024
- better bathroomsa
Table of Contents
**USER MANUAL
Thank you for choosing Better Bathrooms.
**Please reed this manual before installing your product and keep for future
reference.
Product name_CHRBOTTRAP/CHSQBOTTRAP
BT01 Chrome Exposed Bottle Trap
Please note: Image is for illustrative purposes only and may differ slightly to the actual product.
- Single-person assembly
- We always recommend using professional tradespeople to install your product
Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We’re on a mission to bring you extraordinary bathroom products, for less.
From modern to traditional style ceramics, plus the gorgeous fixtures,
fittings and furniture to match. So, you can fall in love with your space
every single day.
As one of the UK’s largest independent bathroom stores, we’ve received
countless awards; including the National Business Awards UK, the Digital
Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.
We hope your new product exceeds your highest expectations. However, if you
experience any problems, please:
- log in to your account and contact our customer services team via your self-serve portal-betterbathrooms.com/CustomerAccount/Login.
- contact us via-betterbathrooms.com/content/contact-us.
Important information
- Please read these instructions thoroughly and retain for future reference
- Manufactured to EN274 traps for sanitary appliance
Parts
Disassemble all the parts according to the figure above.
Please note that Parts are for illustrative purposes only and may differ
slightly to the actual product
1. WASHER
2. BODY
3.WASHER| 4. Nut
5. PIPE
6. Cover
---|---
Installation
Step1: Put washer, nut and cover on the pipe, then connect pipe to the body.
Step2: Loosen the nut, and then pull the body to adjust up and down, so that the outlet of the body is in line with the drainage hole. Insert the pipe into the drainage hole, put the washer into the body, install it on the click clack basin waste, and then tighten the seal.
Step3: Apply sealant between drainage hole and pipe, tighten the nut. After the sealant solidifies, pour the water into the basin for drainage, test for water leakage, and finally install the decorative cover on the wall.
Step4: Installation is completed.
Maintenance
To maintain the surface finish of your product, wipe clean after every use,
using a clean damp cloth, a mild detergent mixture can be used. Do not use
abrasive cleaning agents or materials on the product surface.
If any harsh chemicals come into contact with the surface of the product
during bathroom cleaning, rinse off immediately, wipe clean and dry
Part of the BuyltDirect Group
For more information
Visit betterbathrooms.com
Email[email protected]
Call 03303903062
Write to Trident Business Park, Neptune Way,
Huddersfield, HD2 1UA