CARSON 500409006 Specter Brushless 6S 2.4GHz RTR Buggy Instruction Manual

June 4, 2024
Carson


Instruction Manual

CARSON Specter Two Brushless 50 040 9000

Dear Customer
We congratulate you for buying this CARSON RC model car, which is designed using state-of-the-art technology.
According to our policy of steady development and product improvement, we reserve the right to make changes in specifications concerning equipment, material, and design at
any time without notice.
Specifications or designs of the actual product may vary from those shown in this manual or on the box.
The manual forms part of this product. Should you ignore the operating and safety instructions, the warranty will be void. Keep this guide for future reference.

Limited Warranty

This product is warranted by CARSON against manufacturing defects in materials and workmanship under normal use for 24 months from the date of purchase from authorized franchisees and dealers. In the event of a product defect during the warranty period, return the product along with your receipt as proof of purchase to any CARSON store. CARSON will, at its option, unless otherwise provided by law:
(a) Correct the defect by repairing the product without charging for parts and labour
(b) Replace the product with one of the same or similar design;
or
(c) Refund the purchase price.
All replacement parts and products, and products on which a refund is made, become the property of CARSON. New or reconditioned parts and products may be used in the
performance of warranty services. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.

The Warranty does not cover:

  • Damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
    maintenance, alteration, lightning, or another incidence of an excess voltage or current;

  • Damage caused by losing control of your car;

  • Any repairs other than those provided by a CARSON Authorized Service Facility;

  • Consumables such as fuses or batteries;

  • Cosmetic damage;

  • Transportation, shipping, or insurance costs; or

  • Costs of product removal, installation, set-up service adjustment, or reinstallation

This warranty gives you specific legal rights, and you may also have other rights which may vary according to the country of purchase.

Declaration of conformity
Dickie-Tamiya GmbH & Co. KG hereby declares that this model kit with radio, motor, battery, and charger is in accordance with the basic requirements of the following European directives: 98/37 EG and 89/336/EWG and other relevant regulations of guideline 1999/5/EG (R&TTE). The original declaration of conformity can be obtained from the following address:
Dickie-Tamiya GmbH & Co. KG • Werkstraße 1 • D-90765 Fürth • Germany

**** The explanation of the symbol on the product, packaging, or instructions: Electronic devices are valuable products and should not be disposed of with household waste when they reach the end of their running time! Help us to protect the environment and respect our resources by handing this appliance over at the relevant recycling points.

Before driving your new model carefully read these instructions!

Included Items

Transmitter (only for RTR version)
Model

Safety precautions

Radio controlled models are not toys, operating them has to be learned step by step.

  • Children less than 14 years of age should drive the model only together with a supervising adult.
    Driving a radio-controlled car is a fascinating hobby that has to be practiced with the necessary caution and respect.
    A radio-controlled model car can cause damage and injuries in case of uncontrolled driving conditions and the user is liable for this.

  • Make sure that you have sufficient insurance coverage in practicing your hobby.
    Only a well maintained model will function in a correct manner.

  • Only use approved spare parts and never fit any unsuitable items.
    It is the user’s responsibility to ensure that the model is functioning correctly and that all nuts, bolts, and screws are properly tightened.

Never start driving before you have made sure of the following points:

  • Batteries for transmitter and receiver are well charged and of the correct voltage.
  • Always check the radio operation before starting the car.
  • Make sure that all Servos respond correctly to the signals of the transmitter.
  • All operable parts are in good condition and you have tested their operation.
  • You have made sure that all screws are tightened.
  • There is no other RC or similar transmitter nearby which could cause interference.
    Any further radio signal on the same frequency can cause the loss of control for your model.

Always switch on the transmitter first to avoid any uncontrolled reaction of the receiver to a foreign radio impulse.

  • Fully extend the transmitter antenna and make sure that nobody in your environment controls a model with the same frequency (number on the crystal) and that there is no
    discernable interference.

To end the operation switch off the receiver first, then the transmitter.

  • Keep your car away from high voltage cables or radio masts. Never use the model when lightning is present.

  • Atmospheric disturbances can affect the signals of your remote-controlling transmitter.

  • Do not use the model in wet areas. The electrical connection of the model is not waterproof. Therefore do not drive while raining, snowing, in puddles, or on wet grass.
    Always avoid running radio control models in restricted, confined, or populated areas.

  • Keep away from roads, highways, people, and animals! Choose a sufficiently open & large area; it should be free of obstacles.
    Do not drive, if you are overtired or your reactivity is impaired in another way.

  • Watch your model constantly and do not become distracted.
    The body shell should be correctly attached to the vehicle before driving.

  • Allow cooling time for the engine components before removing the body shell.
    These parts become extremely hot during operation and could cause serious injury.
    Pay attention to charge announcement of your transmitter.

  • Ensure that the batteries for the radio and receiver are fully charged and of the correct voltage. When the batteries are running low you might lose control of your model.
    Never use fully loaded batteries and batteries that have already run low, or batteries of a different capacity at the same time.

  • Never load batteries that are not rechargeable

If not using the model for a longer time, the rechargeable battery for driving has to be removed absolutely.

Finally
Please read the instructions before operating your model. Each time you have finished driving the model, always check the correct operation of the components. A single loose screw can result in a dangerous situation for your model. Maintain your model regularly and replace damaged or worn-out parts with genuine spare parts.

We wish you great fun with your CARSON model car!

Additional Items Needed for Starting the Model:

This is a selection and recommendation of the accessory articles from the firm of CARSON Model Sport.
To operate the RC car you require:

  • 1x 7.2 V drive battery or 7,4 V/ 11,1 V LiPo battery
  • 8x mignon batteries or rechargeable batteries for the transmitter
  • 1x plug-in charger or tabletop charger for the drive battery

| For the transmitter: Nº 50 060 9002 x2 8 mignon batteries 1600 mAh or
---|---
| Drive battery: racing pack 7.4 V e.g. Nº 50 060 8088 Powerpack 7.4 V/ 3600 mAh
| Drive battery: racing pack 7.4 V e.g. Nº 50 060 8089  Power pack7.4 V/ 4000 mAh
| Nº 50 060 9000 x2 8 mignon batteries 2300 mAh
| Drive battery: racing pack 11.1 V e.g. Nº 50 060 8091 Powerpack 11.1 V/ 3200 mAh
| Drive battery: racing pack 7.4 V e.g. Nº 50 060 8090  Power pack7.4 V/ 4600 mAh
| Charger unit: e.g. Nº 50 060 6040 Expert Charger Sport
| Charger unit: e.g. Nº 50 060 6041 Expert Charger Pro
| Charger unit: e.g. Nº 50 060 6042 Expert Charger Master

Tools Needed for the Assembly

a. Chassis

b. Removing Body

  • Remove hook pin and
  • Take body off

c. Installation of Antenna

  • Thread the antenna cord through the antenna pipe and
  • Put the antenna pipe into the antenna foot on the chassis

d. Loading Battery
Beware:

Only use the specially provided charger units to charge the batteries.
Otherwise, your drive battery could be damaged. We recommend the CARSON Expert charger Nº 50 060 6040, 50 060 6041, and 50 060 6042.
The charging time will vary according to the charger unit and battery type.

e. Insert Battery

  • Legen Sie den Akku ein.
  • Put the battery holder on it and
  • Fix it with the hook pins.

f. Turn the Power Switch on

  • Pull the transmitter antenna out completely.
    The range of the remote control is reduced if the antenna is not pulled out completely.

CAUTION!
Always turn the transmitter’s power switch ON first!

  1. Connect the rechargeable battery for driving.
  2. Switch on the receiver.
  3. Put the body on and fix it with the body split pins.

g. How to Control Your Model

  • Raise the tyres off the ground.
  • Turn the steering wheel to the right and left as far as it will go. The wheels are to follow the steering direction.
  • If the wheels operate in the opposite direction, operate the servo Reverse switch (ST in position REV).

  • For regulating the driving speed operate the gas/brake
    – lever to the rear (driving forward, to give speed)
    – and/or forward (braking, reverse movement)

h. How to Change Frequencies
Transmitter

A rapid change of frequencies is possible simply by unplugging an interchangeable plug in crystal on the back of the transmitter and then plugging in another one of a different frequency. Crystals for both the transmitter and receiver must be matched with each other. Make sure that the crystal is fully inserted in the transmitter and receiver, not partially.

Receiver
Plug in an interchangeable crystal into the receiver for a rapid change of frequencies.

Troubleshooting

Problem Cause Correction
Model doesn’t move Transmitter or chassis power switch is not ,.ON” Switch

power on
Polarity or battery type is wrong| Check polarity and type
Batteries have run down| Change batteries or charge them
Loss of control| Batteries have run down| Change batteries or charge them
Antenna is missing or not attached properly| Attach antenna and extend transmitter antenna to full length
R/C model using same band (frequency) is nearby| Run model in different area or change crystal
Doesn’t run straight| Steering trim is not adjusted correctly| Make adjustment
Front and rear wheel nuts are too lose| Tighten wheel nuts
Doesn’t stop| Throttle trim is not adjusted correctly| Make adjustment
Doesn’t reverse| Throttle trim is not adjusted correctly| Make adjustment
Wrong action| Control properly
Running too slowly| Batteries have run down| Change batteries or charge them
Motor has lost power| Change to spare motor
Rear wheel nuts are too loose| Tighten wheel nuts
Dust or foreign objects are inside gears| Turn the power switch ..OFP and clean out gears

Assembly

  1. **Assembly slipper clutch

**

  1. Gear box assembly

Liquid screw lock
Grease
Silicon Oil

  1. Front transmission

If there are an excess play between the gears, please use the provided (14.5 x 16 x 0.2) shim and shim accordingly.

  1. Rear transmission

**Tuning Tipp
Kit: Oil
Tuning: Silicon Oil

908048 Silicon Oil 50 ml 300
908049 Silicon Oil 50 ml 400
908050 Silicon Oil 50 ml 500
908051 Silicon Oil 50 ml 600

**

  1. Assembly central drive

  2. Assembly spoiler mount

  3. Assembly body mount

  4. Assembly steering arm

  5. Front suspension assembly

  6. Rear suspension assembly

  7. Assembly onto the chassis

  8. Shocks

  9. Assembly shocks

  10. Rear spoiler

  11. Assembly battery holder

  12. Assembly steering servo

  13. Steering linkage

  14. Mounting of the complete tires

**Screws

**

50 020 5431 Set 1
Srews for front suspension

50 020 5432 Set 2
Screws for rear suspension
50 020 5433 Set 3
Screws for radio and chassisplate

50 020 5520 Set 4
Screws for centerdiff

Spare Parts

Tuning parts

For Germany:
Service-Hotline:
Mo – Do 8.00 – 17.00 Uhr
Fr 8.00 – 14.30 Uhr
01805–73 33 00
12 ct/min
CARSON-Model Sport
Abt. Service
Mittlere Motsch 9
96515 Sonneberg

CARSON-Model Sport
Werkstraße 1 • D-90765 Fürth / Germany
www.carson-modelsport.de

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals