ROSSNY 17322 Bamboo Plant Stand Installation Guide
- May 15, 2024
- ROSSNY
Table of Contents
Assemble Guid
BAMBOO PLANT STAND
Please read the instructions carefully before assembly
Mudeela Co., Ltd.
No.542, Xinniu Community, Longhua Dist., Shenzhen, China
support@mudeela.com
www.mudeela.com
Made in China
Product Information
Product Name: 5-Tier Bamboo Plant Stand
Assembled Size: 38″x18″x18″ (LxWxH)
Material: Bamboo
Intended Use: Indoor and sheltered outdoor area
Email: support@mudeela.com
Caution
- Use only the included wrench to tighten/loosen the screws. Do not use a power drive/driver.
- Make sure the positioning holes are aligned properly before tightening the screws. Do not over-tighten.
- When using this plant stand, place plants on starting from the bottom tier up to the top tier.
- To keep a good balance, place heavier items at the bottom of the stand and make sure weight is evenly distributed.
- Do not allow children to climb on the stand.
Packing List
Product Diagram
Note 1: When the assembly is finished, please check that every part is
securely connected before use. Do not overtighten.
Note 2: Better to put the plant stand against the wall for more
stability.
How to Assemble
Step 1: Assemble Poles
Use Screw D to connect two ends of the two poles( L + L) by swiveling. Make
one pairof “L+ L”
Use Screw D to connect two ends of the two poles( L + S) by swiveling. Make
three pairs of “L+ S ” Step 2: (Do not turn the stand after finishing this
step)
Step 3: (Do not turn the stand after finishing this step)
Step 4: (Do not turn the stand after finishing this step)
Step 5: (Do not turn the stand after finishing this step)
Step 6:
Documents / Resources
|
ROSSNY 17322 Bamboo Plant
Stand
[pdf] Installation Guide
17322 Bamboo Plant Stand, 17322, Bamboo Plant Stand, Plant Stand, Stand
---|---