air health S1 Skye Air Purifier User Manual

air health S1 Skye Air Purifier

Please Read and Keep for Future Reference

Scan QR
Download the air health IAQ” app

Thank you for choosing to buy an Air Health air cleaner. We BELIEVE in safe spaces. We are DEDICATED to making the best air cleaners on earth to enable you to live your healthiest life. We STRIVE to apply the best technology and research into delivering you clean air. The latest version of this user manual can be found on airhealth.com

Best Practices

Run Skye 24/7
For the highest effectiveness, Skye should run all the time.

Give Skye Space
Skye will work in any room, but for it to clean the most air, it needs space around it, away from walls and furniture to help maximize its airflow. Skye is designed for large rooms such as living rooms, large bedrooms, and open floor plans.

Treat Skye Well
Skye requires a new filter about every six months and a new UV lamp every year to perform at its best. Sign up to automatically receive your replacement filters and lamps at airhealth.com/skye

Meet Your New Skye

Unit

• A Control Diall
• B User Interface Screen
• C Clean Air Exit|
• D Power Button
• E VOC & Particle Sensor
• F Power Connection Port
• G Face of Unit
• H UVC Lamp
• 1 PRO-Cell Filter
  • Pre-filter
  • Carbon
  • НЕРА
  • PCO

ALWAYS DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE SUCH AS REPLACING THE FILTER AND/OR LAMP.

Remove Packaging

Install Lamp and Filter

Plug In and Power On

Start Purifying Your Air

Controls & Interface

Home Screen

Air Quality Indicator

0-500 scale (0 is great air, 500 is hazardous), the number will change colors to indicate different levels of air quality.

Settings
Turn all the way left until the  (cog) icon is selected (white) and click to enter settings.

Filter Life
The color will change to alert when the filter needs to be replaced.

Fan Level
On the home page, turning the dial changes the fan level.

Lamp Life
The color will change to alert when the lamp needs to be replaced.

Smart Mode

On this setting, you set the minimum fan speed and Skye will automatically increase the fan speed if it measures poor air quality. The fan will never decrease below this speed.

Manual Mode

• On this setting, you set the fan speed and Skye will not change speed.

Settings

Air Quality Indicator

The sensor and air purifier are not medical devices and the information they provide is not intended to diagnose, treat, cure, or prevent any disease or condition. Consult your doctor if you are unsure what levels of particulate matter are safe for you and visit www.airnow.gov for more information on particulate matter and all aspects of air pollution.

• ALWAYS DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE SUCH AS REPLACING THE FILTER AND/OR LAMP.

Alerts

Lamp Life is Low
This means your lamp’s life is very low and it is time to replace it. Click “x” to ignore or “reset” after you change the lamp.

Filter Life is Low
This means your filter life is very low and it is time to replace. Click “x” to ignore or “reset” after you change the filter.

Check Lamp
This means the lamp is not fully plugged in. Unplug Skye and open the base to check that the lamp is properly plugged in.

E2: Error Code Please reset the device by powering off the device, unplug the power cord, and wait 10 seconds. Plug the device. If the warning symbol persists, please contact customer service.

Lamp Malfunction
This means the lamp has malfunctioned. Confirm the lamp is installed correctly. If this persists, the lamp may need to be replaced.

Factory Reset
Press and hold the power button on the back of Skye to prompt this factory reset screen. Click “x” to decline or “check” to reset the device to its default settings.

Air Health App

Download the “Air Health IAQ” App
Download the “Air Health IAQ” app from the App Store or Google Play. Open the app, register your new device, and follow the on-screen instructions to set up a new account.

Note: Connecting Skye to WiFi will enable filter and lamp status indicators on the device and in the app. This will help you track when your Skye needs a new filter or lamp.

Care & Maintenance

Replacing the Filter

Help & Support

Thank you for welcoming Air Health Skye into your home. We promise to make the best air cleaners in the world so that you can live your healthiest life. Download the “Air Health IAQ” app to access FAQs and support. If you have any questions or feedback, please reach out.

• Visit our website at www.airhealth.com
• Email us at contact@airhealth.com
• Call us at 1.844.791.3466

Warranty Information

Air Health (“Company”) warrants that your Skye unit (“the product”) will perform to the specifications stated and shall be free from defects in material and workmanship under normal use for the limited period indicated on the Air Health website, from the date of shipment, subject to the provisions outlined on the Air Health website. www.airhealth.com/warranty Your serial number can be found on your Skye’s rating plate which is on the base of the appliance. Visit www.airhealth.com/support for online help, support videos, general tips, and useful information about Skye and Air Health’s other air treatment solutions.

Safety Precautions & Warnings

WARNING – READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY. PLEASE SAVE FOR REFERENCE.
Do not attempt to defeat safety features. Unplug or disconnect the appliance from the power supply before replacing filters or UV bulbs, or when the appliance is not in use.

• WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. Do not operate any purifier with a damaged cord or plug, or if the wall socket is loose. Do not run cord under carpeting, throw rugs, runners, or similar coverings. Do not run cords under furniture or appliances. Arrange the cord away from the traffic area so that it will not be tripped over.
• WARNING: Skin or eye damage may result from directly viewing the light produced by the bulb in this apparatus. Always power down and disconnect power before performing any maintenance such as replacing or servicing the filter and/or lamp. Only use approved replacement filters and lamps, manufactured by Air Health.
• Remove all packaging, including the filter bag, before use.
• Products that are damaged must not be operated. Never operate the air purifier if the plug or cord is damaged or appears damaged. Only qualified service personnel should ever replace or attempt to replace a damaged power cord or plug. If the appliance is damaged or malfunctions, turn it off, disconnect it from the power supply and contact Air Health.
• This product must only be connected to a wall socket outlet matching the supply plug type and rating stated on the rating plate.
• Do not alter the plug in any way.
• Locate the air purifier near the outlet wall socket and do not use extension cords.
• Do not place the cord near a heated surface.
• Always turn off the air purifier before unplugging the air purifier from the outlet.
• Do not attempt to service the air purifier in any way other than to replace or clean the air filter and lamp.
• Only use approved Air Health replacement filters and lamps. Using any non-approved filters or lamps voids the warranty. Replace the UV bulb with the models specified by Air Health on the Air Health website.
• Always unplug the power cord from the electrical outlet when the air purifier is not in use or when changing the filter and lamp.
• Never run the air purifier unless it is fully assembled. Do not operate without the filters and/or lamp installed.

Safety Precautions & Warnings (Continued) 

• Never use the power cord to pick up, carry, drag, pull, or lift the air purifier. Do not pull the cord against or around sharp corners and edges.
• Always remove the plug from its power outlet by holding onto the plug itself and pulling gently, do not pull from the cord itself.
• Only use the purifier with the power cable provided.
• Only clean this machine with a damp cloth, do not use any liquid cleaning agents (ex. solvents, bleach, etc.), or water.
• Only use in an upright position. Do not place anything on top of the air purifier or obstruct the air intake or outlet vents. Do not drop items into the air purifier.
• Use care when operating the air purifier by keeping all foreign objects, fingers, body parts, hair, loose clothing, jewelry, etc., away from openings. Do not insert fingers or other items into the air intake or outlet vents.
• Do not sit on, stand on, climb onto or hang from the appliance
• Never touch the air purifier or its plug when your hands are wet.
• If moving the air purifier, always lift and carry your Skye by the handles. Do not carry by housing or base.
• Do not use outdoors.
• Do not use the device in a humid environment such as a bathroom. Improper usage may cause fire, electric shock, or malfunction.
• The air purifier should not be used in a flammable and combustible environment or environment with corrosive air.
• Use only as described in this manual. Any modifications void the warranty and can result in harm.
• Ensure the appliance is always placed on a firm level surface before operation. To help ensure the stable placement of the appliance and limit the risk of tipping, only place it on stable, flat floor surfaces and make sure the cord is fully clipped into the cord holder.
• If the device is demonstrating unwanted or unexpected behavior, unplug the device and contact Air Health Customer Support.

Disclaimer

Your Skye’s sensor is intended to be comparable to other commercially available consumer air sensors. At sufficient concentrations, it is sensitive to all physical particles, like dust, smoke, components of vehicle exhaust, soot, and many other airborne substances, as well as volatile organic compounds (VOCs) which are gases that are emitted from certain solids or liquids. VOCs include a variety of chemicals, some of which may have short- and long-term adverse health effects. Skye’s air quality sensors monitor multiple VOCs and report Total Volatile Organic Compounds (TVOC) which is used to calculate the IAQ. The levels of particles and VOCs it reports may not precisely conform to other methods of measuring particulate matter pollution. The measurements are intended to be a close estimation of the indoor air quality in the room in which Skye is currently operating. asthma, heart disease, or any other heart and lung conditions; children; and the elderly should always follow any action plans for asthma attacks, heart problems, or any other health issue regardless of the air quality levels reported by the Skye sensor. The sensor and air purifier are not medical devices and the information they provide is not intended to diagnose, treat, cure, or prevent any disease or condition. Consult your doctor if you are unsure what levels of particulate matter are safe for you and visit www.airnow.gov for more information on particulate matter and all aspects of air pollution. As with any product, your device uses new plastics and materials in its manufacture. We do all we can to minimize off-gassing from these materials, including shipping each device with carbon filters to absorb smells. Despite this, there may be a noticeable smell during the first 24-48 hours of use, which is safe and expected. If these odors are produced by voes, the particulate matter sensor in your Skye may detect their presence and automatically adjust the fan speed to remove them. Nevertheless, this particular type of off-gassing is harmless and temporary. After the initial settling period, scents should significantly subside. At that point, your filter has reached full effectiveness. For people who are: immunocompromised; have compromised heart or lung function; have a history of

FCC Statement

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

FCC RF Radiation Exposure Statement:
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and all persons.

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY. PLEASE SAVE FOR REFERENCE.

Air Health Support
Visit airhealth.com/support for online help, support videos, general tips, and useful information about Skye and Air Health’s other air treatment solutions.

• airhealth.com
• contact@airhealth.com
• 1.844.791.3466

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>