7PMBEANE HLP282R-1A Rustic Farmhouse Chandelier Instruction Manual

7PMBEANE HLP282R-1A Rustic Farmhouse Chandelier

Specifications:

• Model No.: HLP282R-1A
• Light Bulb: E26 bulb, up to 60W
• Dimmable: Compatible with dimmable bulbs and dimming switches (not included)
• Installation Kit Contents:
  • Canopy Screw with Nut – Quantity: 2
  • Wire nut – Quantity: 3
  • Pair of Gloves – Quantity: 1
  • Cap Nut – Quantity: 2
  • Wood Screw (optional) – Quantity: 2
  • Machine Screw & Washer for Outlet Box (spares) – Quantity: 2

Product Usage Instructions:

Safety Rules:

WARNING: Ensure electricity to the wires you are working on is shut off. Turning off the power using the light switch is not sufficient. Follow proper safety precautions.

Light Bulbs Required:
This chandelier uses an E26 bulb, up to 60W. It is fully dimmable with compatible dimmable bulbs and switches (not included).

Installation Preparation:
Tools You Need:

• Ladder
• Pliers
• Wire Strippers
• Screwdrivers
• Power Drill (optional)
• Drill Bit (optional)

Installation Steps:

Step 1 (Assemble the Light):

1. Pass the main wire through the canopy.
2. Install the lift ring on the lamp body and canopy.
3. Connect the wires as shown on page 5.
4. Install the E26 bulb.

Step 2 (Hang and Wire):

1. Turn off power at the circuit box to avoid electric shock.
2. Attach Mounting Plate to the junction box using mounting screws.
3. Connect fixture wires to house wires with Wire nut and wrap the connection with electrical tape.
4. Attach canopy to the affixed mounting plate using cap nut.

Clean And Care:
To clean, wipe the fixture with a soft cloth. Avoid using chemical cleaners that can discolor the finish. Do not use abrasive  materials for cleaning.

Ordering Parts:
Keep this manual for future reference. Replacement parts can be ordered from the place of purchase using exact wording from diagrams.

Frequently Asked Questions (FAQ):

• Q: What should I do if the chandelier is not working after installation?
  A: Make sure all connections are secure and check that the power source is functioning properly. If issues persist, contact customer support for assistance.

• Q: Can I use LED bulbs with this chandelier?
  A: This chandelier is compatible with E26 bulbs up to 60W. LED bulbs within this specification can be used.

Manual Book

Chandelier
Model No.: HLP282R-1A

Scan for Installation Video

Contact Information

Please contact us with the following information:

1. Screenshot of your order page, including product picture, name, and order ID number.
2. Problem details with pictures / short video if possible.

Email: [email protected]

Installation Kit

Note:
Some extra hardware may be included. The quantity listed above is the number required for installation.

Safety Rules

WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS TURNED OFF. TURNING THE POWER OFF USING THE LIGHT SWITCH IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.
NOTE: The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions or situations that may occur. It must be understood that common sense, caution, and care, are factors which cannot be built into any product. These factors must be supplied by the person(s) installing this unit.

READ & SAVE THESE INSTRUCTIONS

CAUTION: Before assembling the lighting fixture, please read the following chapters. If you feel you do not have enough electrical wiring experience, either refer to a do-it–yourself wiring handbook or have your lighting fixture installed by a qualified, licensed electrician. Remove the fixture and the mounting packages from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
Be sure to read these installation instructions and review the diagrams thoroughly before installation.

LIGHT BULBS REQUIRED

This lamp uses a E26 bulb, compatible with bulb up to 60W. Fully dimmable when used with dimmable bulbs and compatible dimming switches (not included).

Installation Preparation

Tools You Need

If mounting to a support structure, you will also need the optional tools.

Installation Step 1 (Assemble the Light)

1. Pass the main wire ① through the canopy ②.
2. Install the lift ring ⑤ on the lamp body ⑥ and canopy ②.
3. Connect the wires as shown on page 5.
4. Install the E26 bulb ⑦.

Installation Step 2 (Hang and Wire)

Note: Please test the fixture before installation to ensure it’s working properly.

1. Turn off power at circuit box to avoid possible electric shock.
2. Attach Mounting Plate to junction box using mounting screws.
3. Connect fixture wires to house wires with Wire nut, and wrap the connection with electrical tape.
4. Attach canopy to the affixed mounting plate using cap nut.

Trouble Shooting

1. Missing/Broken Parts
   • Make a list of the missing/broken parts according to the packing list, take photos for broken parts, then email us for free replacements.
2. Bulbs Do Not Light Up
   • Check your power and switch to make sure it’s power on.
   • Check the bulb to make sure it’s installed correctly.
   • Change a new bulb.
   • Check the wires to make sure they are connected correctly.
3. Bulbs Flicker/Noisy Operation
   • Check the bulb to make sure it’s installed correctly.
   • Change a new bulb.
   • Make sure your bulb is dimmable if you use a dimmer switch.
4. Could Not Install/Assemble
   • Take photos of the ceiling/fixture, contact seller for technical support.

Clean And Care

To clean, wipe the fixture with a soft cloth. Spraying from chemical cleaners can discolor the finish of the fixture. Do not use scouring pads, powders, steel wool, or abrasive paper to clean this fixture.

Ordering Parts

Keep this manual for future reference, and in case replacement parts are needed. Available parts can be ordered from the place of purchase. Use exact wording from diagrams when ordering parts.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>