Watts Regulator Co 2PEX Ball type Washing Machine Shutoff Valve Instruction Manual
- June 17, 2024
- Watts Regulator Co
Table of Contents
Watts Regulator Co 2PEX Ball type Washing Machine Shutoff Valve
Product Information
Specifications:
- Model: IS-2-M2
- Models Available: 2, 2T, 2PEX
- Type: Ball-type Washing Machine Shutoff Valve
- Adapter Options: 1/2 solder, 5/8 compression, male thread, PEX adapters
Product Usage Instructions
Installation Instructions:
- No. 2 features 1/2 solder or 5/8 compression adapters. No. 2T features 1/2 solder or male thread adapters. No. 2 PEX features 1/2 PEX adapters.
- Disassemble adapters and remove O-rings before soldering.
- Install a minimum of 3 inches above the top of the washing machine.
- Pipe connections are 23/8 inches in the centre.
Maintenance:
- Shut off the water supply and loosen the adapter screws to remove the valve.
- Remove O-rings and screws from adapters.
- Move lever to the on position and unscrew from spindle.
- Use a 3/8 Allen wrench to remove hose adapters and bottom PTFE discs.
- To replace spindle O-rings, use a 1/4 Allen wrench to remove the side plug.
- Reassemble by replacing all seals in reverse order and tighten adapters securely.
FAQ
- Q: How do I know which adapter option to choose?
- A: Depending on your plumbing setup, choose the appropriate adapter type provided in the installation instructions.
- Q: What should I do if there is leakage after installation?
- A: Ensure all seals are properly replaced and adapters are securely tightened to prevent leakage.
- Q : Can I use this valve for concealed piping?
- A : Yes, there are specific adapter options available for concealed piping, as mentioned in the installation instructions.
Installation Instructions
- No. 2 features 1/2″ solder or 5⁄8″ compression adapters. No. 2T features 1⁄2″ solder or male thread adapters. No. 2 PEX features 1⁄2″ PEX adapters.
- Disassemble adapters and remove O-rings before soldering.
- Install a minimum of 3″ (76mm) above the top of the washing machine All adapters can be orientated to top, bottom or side.
- Pipe connections are 23⁄8″ (60mm) in the centre.
Model M2 identification is shown on the body casting
Kit for No. 2-M2 consists of:
- 1-Side Plug O-ring
- 2-Adapter O-rings
- 4-PTFE Discs
- 2-Adapter Screw O-rings
- 2-Spindle O-rings
- 2-Hose Adapter O-rings
| ORDERING CODE NO. | KIT NO. | FOR | SIZE |
|---|---|---|---|
| 0862000 | 2-M2-RK | 2-M2, 2T-M2, 2M2PEX | 1⁄2″ |
Maintenance
- Shut off water supply and loosen the adapter screws to remove the valve.
- Remove O-rings and screws from adapters.
- Move the lever to the on position and unscrew from the spindle.
- Use a 3⁄8″ Allen wrench to remove hose adapters and remove bottom PTFE discs. This allows the removal of the balls from the spindle by shaking slightly.
- Insert a pencil through rear of the valve to pry the upper PTFE discs loose.
- To replace spindle O-rings, use a 1⁄4″ Allen wrench to remove the side plug.
- Reassemble by replacing all seals, and assembling in reverse order. Tighten adapters securely to avoid leakage.
Warranty
Limited Warranty: Watts Regulator Co. (the “Company”) warrants each
product to be free from defects in material and workmanship under normal usage
for a period of one year from the date of original shipment. In the event of
such defects within the warranty period, the Company will, at its option,
replace or recondition the product without charge.
THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY
GIVEN BY THE COMPANY WITH RESPECT TO THE PRODUCT. THE COMPANY MAKES NO OTHER
WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The remedy described in the first paragraph of this warranty shall constitute
the sole and exclusive remedy for breach of warranty, and the Company shall
not be responsible for any incidental, special or consequential damages,
including without limitation, lost profits or the cost of repairing or
replacing other property which is damaged if this product does not work
properly, other costs resulting from labour charges, delays, vandalism,
negligence, fouling caused by foreign material, damage from adverse water
conditions, chemical, or any other circumstances over which the Company has no
control. This warranty shall be invalidated by any abuse, misuse,
misapplication, improper installation or improper maintenance or alteration of
the product. Some States do not allow limitations on how long an implied
warranty lasts, and some States do not allow the exclusion or limitation of
incidental or consequential damages. Therefore the above limitations may not
apply to you. This Limited Warranty gives you specific legal rights, and you
may have other rights that vary from State to State. You should consult
applicable state laws to determine your rights. SO FAR AS IS CONSISTENT WITH
APPLICABLE STATE LAW, ANY IMPLIED WARRANTIES THAT MAY NOT BE DISCLAIMED,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF
ORIGINAL SHIPMENT.
contact
- USA: T: 978-689-6066
- Watts.com
- Canada: T: 888-208-8927
- Watts.ca
- Latin America: T: (52) 55-4122-0138
- Watts.com
© 2023 Watts
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>