acer UT241YAbmihuzx LCD Monitor User Guide

June 17, 2024
Acer

acer UT241YAbmihuzx LCD Monitor

Important safety instructions

Please read the following instructions carefully.

  1. To clean the LCD monitor screen:
    • Turn off the LCD monitor and unplug the power cord.
    • Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
  2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
  3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
  4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
  5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this range may result in permanent damage.
  6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
    • Monitor-to-PC signal cable is frayed or damaged.
    • Liquid spills onto the LCD monitor or the monitor is exposed to rain.
    • The LCD monitor or case is damaged.

Attaching the monitor to the base

  1. Remove the monitor from the packaging.
  2. Attach the footstand to the base. (for selected models).
  3. Turn clockwise to lock. Ensure that the base is locked onto the stand. (for selected models)
  4. Secure the base to the stand by turning the screw using the integrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

  1. Turn off your computer and unplug your computer’s power cord.
  2. Connect the signal cable to the HDMI (optional) input socket of the monitor and the HDMI (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector.
  3. connect the USB Cable(Optional) Connect the USB cable to the port for fast charge. Connect the USB cable to the port.
  4. USB Type C Cable (Optional, USB Type-C input models only) Connect one end of the USB Type C cable (optional) to your computer and connect the other end to your electric devices.
  5. Insert the monitor power cable into the power port at the back of the monitor.
  6. Plug the power cords of your computer and your monitor into a nearby electrical outlet.
  7. Connecting HDMI+USB-B to computer 1 and USB-C to computer 2 when Control up to 2 computers from a single set of keyboard and mouse connected to the monitor.

Note

  1. Audio output is only for the audio output model. Please check the user manual for more instructions.
  2. If your computer USB-C does not have DP-Alt, pls connect HDMI+USB-B to computer 1 and HDMI+USB-C to computer 2.acer-UT241Y-Abmiuuzx-LCD-Monitor-FIG-1

KVM switch
The built-in KVM switch allows you to control up to 2 computers from a single set of keyboard and mouse connected to the monitor.
AdaptiveSync/VRR (HDMI): It can allow an AdaptiveSync-supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter and low-latency display updates.

External controls

acer-UT241Y-Abmiuuzx-LCD-Monitor-FIG-2acer-
UT241Y-Abmiuuzx-LCD-Monitor-FIG-3

Touch Function

  • Acer monitor is purposed for video and visual display of information obtained from electronic devices.
  • Touch function only works under Win10 OS and you do not need to install any other software.
  • You can use either single-finger or multi-finger touch.
  • To activate touch functionality, you need to connect the display with the provided USB type-B cable to your computer.

Regulations and safety notices

FCC notices
This device has been tested and found to comply with the limits for a Class B digital device under Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the device and receiver.
  • Connect the device to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor complies with the essential requirements and other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, RoHS Directive 2011/65/EU and Directive 2009/125/EC about establishing a framework for the setting of ecodesign requirements for energy-related product.

Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.

Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.

Caution
Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by the Federal Communications Commission, to operate this product. To prevent damage to the monitor, do not lift the monitor by its base.

Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Notice: Canadian users
CAN ICES-003(B)/NMB-003(B) Disposal of waste equipment by users in private households in the European Union This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.

The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Acer monitor is purposed for video and visual display of information obtained from electronic devices.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals