RCH Hardware CN-BR05 Canopy Round Ceiling Instruction Manual
- June 17, 2024
- RCH Hardware
Table of Contents
ASSEMBLING YOUR CANOPY
- Thread the fixture wire through each of the listed components in the order depicted. (Ensure the flat side of the crossbar [B] is facing up as shown)
- Screw the threaded pipe [C] into the crossbar [B] & into the hex nut [A].
- Using the 2 bolt screws [D], mount the crossbar to the electrical box.
- Once secure, screw the loop [E] all the way onto the threaded pipe [C].
- Place the canopy plate [F] over the loop and onto the ceiling.
- Fasten the screw collar [G] onto the loop, firmly holding the canopy plate against the ceiling.
- Attach your chain to the loop, and hang your fixture!
Please note: the canopy depicted may differ from what you ordered, but the assembly diagram is still applicable regardless of style.
FINAL ASSEMBLY:
Threading for A-C
varies by style:
1/8 IPS:| CN-BR05
CN-BR11H
---|---
1/4 IPS:| CN-BR21
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>