iearwat 1200W Portable Power Station User Manual

iearwat 1200W Portable Power Station

Product Specifications

• Model: 1PSUBCMF1PXFS4UBUJPO
• Power: 6TFS.BOVBM
• Weight: 8BSOJOH

Product Usage Instructions

Installation

• Ensure the product is placed on a stable surface.
• Connect the necessary cables following the provided diagram.

Powering On

• Press the power button located on the front panel to turn on the device.

Functionality

• Use the control buttons to navigate through different modes and settings.
• Refer to the user manual for detailed instructions on each function.

Frequently Asked Questions (FAQ)

Q: How do I troubleshoot if the product doesn’t power on?

• A: Check the power source and ensure all connections are secure.
• If the issue persists, contact customer support.

Q: Can I use this product with external speakers?

• A: Yes, you can connect external speakers to enhance the audio output of the device.
• Use the audio output ports for this purpose.
• Thank you very much for purchasing a 1200W power station. Be sure to read this manual carefully before using the product to use the product correctly.
• This manual is needed for product after-sales service.
• Please keep this manual together with the invoice and other purchase certificates.
• To ensure the safety of this product during transportation, this product is only charged about 30% when it is packaged.
• Please recharge when you get the product.
• The product can be charged directly by the wall socket, please do not use extension cords and cable taps.
• When the product is charging, do not plug other products into the same socket.

Warning

1. Please avoid using the product near high temperatures, high humidity, direct sun environment, and a fire place.
2. Do not disassemble or modify this product, it will cause malfunction and fire.
3. Please discard or recycle the product according to the methods prescribed by local laws.
4. Be careful not to drop the product from a high place and give the product a strong impact.
5. Keep or use the product in a place out of the reach of children.
6. Please use our company’s genuine accessories. The damage caused by the use of non-genuine accessories cannot be repaired free of charge.
7. Please leave a space of about 30cm away from the side suction and exhaust ports, so as not to affect the heat dissipation of the product.
8. When not using this product, please turn off the power and unplug the power cord. Please avoid storing the product in a place exposed to direct sunlight with high temperature and humidity.
9. For long-term storage, please consume power from full power to no power once every 3 months, and then recharge to about 50%.
10. Please do not use this product and its accessory cables and connecting equipment when there is a defect.
11. Please do not store the product for a long time in extremely high and low-temperature places such as in the car and the field warehouse to avoid shortening the battery life.

AC Output Parameter

Packing List

Product introduction

• This product is a 1248Wh large capacity 1200W high power, 2 hours of high-speed charging portable energy storage power supply, using high safety performance of LiFePo4 battery.
• It can be used as a backup power supply in case of emergency power cuts, disasters, camping, and vehicles, and can also provide power for various electric tools.
• 1200W high power, pure sine wave AC output, can be used for household appliances such as dryers, microwave ovens, refrigerators, and high-power induction cookers and it can also be used for other electronic devices such as personal computers.
• Through the 700W ultra-fast charging, this model can be fully charged within 2 hours, The AC input/output voltage frequency can be automatically or manually switched between 50Hz/60Hz.
• This product also supports a maximum 500W solar charge, allowing you to charge even when the power is cut or in outdoor situations.

1. Main power control
2. Light control
3. USB control
4. DC control
5. LCD
6. Air intake/outlet
7. AC on/off control(50Hz/60Hz switching control)
8. Anderson input port(for solar panel)
9. AC input port
10. Overload protection
11. Main Power Control

  * The Main Control for the whole system is turned on/off.
  *  **Operate method:** long press the button for 3s to turn on/off the system.
2.  **LED light control**
  *  **Operate method:** short press to turn on and change the light mode (SOS/Flash).
  *  **Notice:** you can turn off the light by long pressing the button(1-2s) in any mode.
3.  **USB button**
  *  **Operate method:** short press to turn on/off.
4.  **DC button**
  *  **Operate method:** short press to turn on/off.
5.  **LCD display**
  * Present the remaining power and use data.
6.  **Cooling system**
  * When the fans are working, please don’t block the channel.
7.  **AC button(AC output, total share 1200W)**
  *  **Operate method:** short press to turn on/off.
  *  **Notice:** 1\. Please confirm the output voltage or frequency before using.
  * Long press the button for 2s to enter the frequency changing mode, 50Hz and 60Hz will blink in the display, press again the button to choose the right frequency, wait till the frequency is not blinking, and then you will get the frequency you want.
  * Quick short press 10 times to switch the voltage.
8.  **Solar panel input**
  * Use the included Anderson→MC4 conversion cable to connect the solar panel.
  * Solar panels can have a maximum input of 500W and a maximum voltage of 50V.
  * If exceeding the maximum voltage leads to equipment damage, it is beyond the scope of the warranty.
9.  **AC Input**
  * Use a wall socket to get 700W fast charging, which can fully charge from 0 to 100% in 2 hours.
  * The product can be charged directly by the wall socket, please do not use extension cords and cable taps. When the product is charging, do not plug other products into the same socket.
  * Please do not plug several devices together in an extension socket at once, the current will be too high and bring damage to the cable and fire risk.
  * Do not use the same socket to connect other devices when charging this product.
  * When the same wiring in a general household exceeds 1500W, The safety circuit breaker will be activated.
10.  **Overload protector**

• To protect this product, an overload protector is added. Prevent damage to the product due to excessive AC input current caused by lightning and power grid fluctuations.
• When such a situation occurs, the overload protector will start to cut off the AC input to protect the product.
• Restore the AC input function of the product in the following sequence.

1. Turn off the power button and unplug all ports.
2. After confirming that all parts are normal, turn on the power button.
3. Press the overload protection button to switch on the AC line to restore AC input.

Display icon introduce

1. Charging/using time
2. Fan state
3. High/low-temperature protection
4. Power percentage
5. Total input power
6. Total output power
7. LED light
8. AC output
9. Type-c output
10. USB output
11. AC charging
12. Anderson charging
13. DC output
14. Cigar lighter output

Display Attention

• When this icon lights up. Please keep the Air intake/outlet unobstructed.
• When this icon lights up. Please note the device is now with high/low temperatures and will possibly stop working till the temperature is back to the normal standard.
• When this icon is blinking, represents that the AC input is faulty, please recheck(Power/Hz/cable).
• When the icon is blinking, represents the output is faulty, please recheck.

UPS mode

UPS function

• This product has the bypass mode, does not need to pass through the battery, and can directly output from the AC.
• In UPS mode, when the AC input power of the mains is cut off due to a power outage, the AC input power of the mains can be used in about automatic switch to product battery power within 10 ms to ensure AC output.

UPS Connections

• As shown in the figure below, connect the product between the socket on the wall and the electrical appliances, and the power of the product is in the ON state.
• When you turn on the power of the electrical appliances, it will directly use the AC power of the power grid.
• In this state, when the power grid is cut off, it will automatically switch to the product’s internal battery to supply power.
• In UPS mode in The United States and Japan, the maximum power output of AC is below 1100W, and the AC output exceeds 1100W. The AC output icon blinks indicate overload.
• In UPS mode of China, United Kingdom, Europe, and South Korea, AC output of the maximum power below 1200W, AC output over 1200W AC output icon flashes indicating overload.

Solar panel connection

• Our products can be connected to solar panels and can be charged through solar panels.
• Solar panel charging power, according to the weather and climate conditions.
• Solar panel voltage exceeding 50V will damage the equipment and may not be covered by warranty.

By solar panels

1. Connecting Pattern
   • The area of charging
2. Connecting Pattern
   • The area of charging

Car charging

• This product can be charged by the cigarette lighter in the car with an ACC cable (accessory: ACC hereinafter).
• Turn on the power of this product, connect the ACC charging cable to the cigarette lighter in the car and the Anderson interface on the side of the product, turn on the engine of the car, and the LCD of this product will show the input power.
• On-board charging should be carried out with the car engine turned on. If the engine is not turned on, the battery might run out.
• Car charging is usually low power of 90-120W, and the charging time will be long.
• If you need a quick charge, it is recommended to use the mains.

Specifications

Battery specification

Fault resolution

• If you have any questions, please feel free to contact us.
• Email address: support@aferiy.com.
• Sincerely.

Warranty Card

• Model: ———————————
• Name: ———————————–
• Address: ———————————-
• Tel: ————————————
• Mail: ————————————–
• Name of the store: ————————————-
• Buying date: —————————————
• Please fill in all the above items.
• This product provides a 24-month warranty service from the date of purchase
• If there is a quality problem within the range of normal use, we provide warranty service.
• After purchasing our company’s products, please keep this product together with invoices and other items. When maintenance services are needed, please provide information according to our company’s request.
• In the case where the warranty is damaged or altered, and no stamp of the sales store on the warranty, the warranty service may not be provided.
• Damage caused by use beyond the normal range of use is not covered by the warranty service.
• The content of the warranty scope shall be subject to the content recognized by the company.
• Even within the scope of the warranty, sometimes it will be exchanged for products with the same function. The shipping and repair fees for products outside the warranty range shall be paid by the customer.
• Sometimes the specifications and functions of the product will be updated without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>