PulseTech SP-12 24 Volt Solar Pulse Battery Charge Maintainer Instruction Manual
- June 17, 2024
- PulseTech
Table of Contents
PulseTech SP-12 24 Volt Solar Pulse Battery Charge Maintainer
Batteries Instruction
Recover, Don’t Replace Your Batteries
Extend the Life of Your Battery Up To Three Times Through years of product
development and independent scientific evaluation, it has been proven that if
used routinely, Pulse Technology can extend battery life cycles up to three
times. This reduces overall costs and environmental waste. Pulse Technology
uniquely positions PulseTech’s line-up of battery maintenance products and no
other known battery charging/maintenance system offers these specific
restorative maintenance characteristics.
Battery Sulfation
Battery sulfation is a naturally occurring “disease” within any lead acid
battery that kills 80% of batteries worldwide. Through the proper maintenance
application of PulseTech’s patented Pulse Technology, this problem can be
eliminated. It is the ultimate solution for removing and preventing the power-
robbing growth of sulphate crystals on lead-acid battery plates. Without the
application of Pulse Technology, over time, sulphates build up until your
battery’s efficiency is gradually diminished, preventing the battery from
accepting and releasing energy, and dramatically shortening your battery’s
life until it can no longer function.
The Science Behind Patented Pulse Technology
Pulse Technology is delivered to the battery through a circuit that is
independent of the charging circuit. This patented, high-frequency pulse
waveform is of a specific amplitude and frequency that is precisely controlled
by microprocessors. It rises rapidly in less than one microsecond to its
maximum amplitude and gradually returns to zero. There is no abrupt stop and
no battery drain. This waveform occurs 25,000 times a second and has been
PROVEN through university and military studies to remove sulfation from the
battery plates and return the lead sulphate to the electrolyte solution
.
Visual Proof of Pulse Technology Results
The photos below are from an independent study comparing the use of Pulse Technology to conventional battery charging. The photos show actual battery plates after various charge and discharge cycles, which reveal the benefits of charging with Pulse Technology versus charging with a conventional charger.
This row of battery plate images shows plates from actual batteries charged with a competitor’s battery charger, the white sulphate crystal deposit build up is common in batteries either left un-maintained or charged with a common battery charger. This row of battery plate images shows plates from actual batteries charged using PulseTech’s patented Pulse Technology. Even after hundreds of cycles, the batteries charged using Pulse Technology have no sulphate accumulation, ensuring the batteries will still perform at peak capacity and live a long and useful life.