SMATE Mini Electric Razor for Men User Manual

SMATE Mini Electric Razor for Men

OVERVIEW

Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Attention

• Please make sure your charging cord and product are dry.
• When cleaning your shaver, please make sure the cap in the shaver bottom is well closed.
• Please don’t use alcohol, salt water, or gasoline to clean the shaver.
• The shaver should be operated and stored in a 5°C-35°C environment.
• Because the outer knife net is very thin, if used improperly it may cause damage. Before using a razor, please confirm whether the outer tool net is damaged.
• If the outer knife mesh has been damaged, do not use the shaver.
• To ensure the safety of transportation, the product you received is locked, please press and hold the power button for 3 Seconds to start the razor; It is recommended to press and hold the power button for 3 seconds when you do not use it for a long time or travel
• Do not use compressed gases, steel wool, abrasive cleaners, or corrosive liquids (e.g. Such as gasoline or acetone) to clean the product.
• Please discontinue use when the product is abnormal or malfunctioning.
• Do not apply excessive pressure to the lips or other parts of the face, and do not touch the outer blade directly with scars or damaged skin.
• This product and accessories are not toys, do not be placed within reach of children to avoid danger.
• Do not use the charging cable when it is damaged or cannot be securely connected to the charging device.
• During charging and use, the razor will have a slight heat, which is a normal phenomenon, Please feel free to use it.
• After use, store the razor in a dry place, away from direct sunlight, or in other places near the heat source.
• This product is not intended for use by persons with physical, sensory, or mental disabilities or lack of experience and knowledge.
• To supervise and guide the use of this product, and to assume responsibility for the safety of users. Please prevent children from viewing this product as a toy, which may cause danger.

How to Use

How to Charge

• Please use the charging cable included in the package to charge.
• Insert the charging cable into the charging device and keep your hands dry when operating.
• Please turn off the power of the shaver before charging.
• It is recommended to use an SV – 1A charging device for charging. The charging time is about 1 hour, and the shaver can work for more than 60 minutes after being fully charged.
• It is recommended to charge at 5 ° C to 35 ° C.
• After a full charge, the body indicator light is steady white, and the charging cable should be removed as soon as possible. Avoid connecting the external power supply for a long time to avoid shortening the battery life.
• Hold down the power button for 3 seconds to unlock the machine and turn it on or off.
• After unlocking the machine, the shaver enters the normal speed operation, press the power button to enter the acceleration gear, and press the power button again to shut down.
• When the machine is locked, press the power button, The indicator blinks red three times, indicating that the machine is locked.
• When the battery is less than 2096, the indicator light is steady red, indicating that the battery is insufficient and needs to be charged; When the battery is less than 10%, the indicator flashes red 5 times and then automatically shuts down.
• During the charging process, when the power is 0-99%, the indicator light flashes white.
• When fully charged, the indicator is steady white.

Cleaning

• For your health and to maintain the service life of the razor, clean the razor immediately after shaving: Do not charge the razor when cleaning it with water.
• Remove the tool head assembly by turning it counterclockwise.
• Use a cleaning brush to clean the dirt inside the tool head assembly, or rinse it under the faucet.
• Shake the excess water dry, keep the tool head assembly dry, then reinstall the body, cover the protective cover, and keep it safe.
• When cleaning the shaver head or the shaver head falls out accidentally, remove and install it in this way.

1. Remove the inner tool holder using tweezers.
2. Place the plastic parts of the tool head into the knife mesh one by one, do not press.
3. Turn the assembled tool head assembly clockwise and install it on the fuselage; You can boot to confirm whether the installation is normal.

Specification

• Item: Portable Shaver
• Model: Тб
• Rated Power: 5w
• Rated Voltage: 5V
• Charging Time: 1H
• Waterproof Level: IPX7

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>