Gobrico GBDSHH533H-6Pair Soft Close Under Mounted Drawer Slides Installation Guide
- June 17, 2024
- Gobrico
Table of Contents
Installation Instruction
Tools Required for Installation
Additional tools(if needed):
chisel, hammer, pencil, safety glasses.
Parts in the Box
Check Dimensions
| Slide Size | Applicable Drawer Length | Applicable Cabinet Depth |
|---|---|---|
| 18″ | 457±2mm | 490-510mm |
| 21″ | 533±2mm | 566-586mm |
Note: If there
are no holes or notches on the drawer, please drill them as shown above.
3. a. Measure length X&length Y, according to your cabinet and drawer
dimensions. Length X could be 0.
b. Mark Line L, which parallel to the bottom of drawer front panel, on the
cabinet back panel.
Note: If there are no holes on the cabinet, please drill them as shown
below.
Installation
-
Secure the Adjusting Locking Devices with 3 screws.
-
a.Disassemble the Rear Mounting Brackets from the Slides.
b. Fix the Rear Mounting Brackets on the back panel of cabinet.
-
a. Connect the Slides with the Rear Mounting Brackets. Please leave about 4mm between the Slides and the edge of cabinet frame.
b. Use two screws to secure the Slides on the frame.
-
a.Extend the Slides and put the drawer on it.
b.Close the drawer so that the Adjustable Locking Devices and Slides will stuck together. The hooks will stuck in the holes as well.
DS080001-XX-2023V1
Documents / Resources
|
Gobrico GBDSHH533H-6Pair Soft Close Under Mounted Drawer
Slides
[pdf] Installation Guide
DS080001-XX-2023V1, GBDSHH533H-6Pair Soft Close Under Mounted Drawer Slides,
GBDSHH533H-6Pair, Soft Close Under Mounted Drawer Slides, Close Under Mounted
Drawer Slides, Under Mounted Drawer Slides, Mounted Drawer Slides, Drawer
Slides, Slides
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>