Ruwaqart B0CS39Y3D6 Digital Camera 4K UHD Vlogging Camera User Manual

Ruwaqart B0CS39Y3D6 Digital Camera 4K UHD Vlogging Camera

Specifications

• Image Sensor: COMS Sensor
• Image Resolution: 44M,30M,24M,20M,12M,8M,5M,3M
• Video Resolution: 4K/30FPS (3840×2160), 2.7K/30FPS(2688X1520), FHD-1920×1080 (60/30FPS), HD-1280×720 (120/60/30FPS)
• LCD Display: IPS 2.4 inch
• Auto Focus: Enabled
• External Memory: Micro SD card (Up to 128GB), Above Class 10
• Digital Zoom: 16X
• Exposure: EV-3~EV+3
• Dimension: 100 60 24MM
• White Balance: Auto/Daylight/Cloudy/Fluorescent/Incandescent
• Photo Flash: <1 meter; OFF/AUTO/ON
• Self-timer: OFF/3S/5S/10S/20S
• File Format: Video – MP4, Photo – JPEG
• Flash: Fill light
• Continuous Shooting: Available
• System Requirements: Intel Pentium 2.0GHz or higher/Microsoft Windows XP or higher operating system/2GB RAM/40GB above available disk memory/Standard USB interface/1GB GPU or higher/1920×1080 pixel or higher resolution
• Working Temperature: Not specified
• Battery: Not specified

Product Usage Instructions

Special Instructions
In photo mode or video mode: when shooting at close range (10cm-50cm or 3.93-19.68 inches) or when switching between far and near scenes, please half- press the photo button. When the prompt box on the screen changes from red to green, the AF (autofocus) function is enabled, allowing for sharp focus.

Parts and Controls

Front side view

1. Fill light
2. Lens
3. Display screen
4. Charging/working indicator light
5. Digital zoom zoom in
6. Digital zoom out
7. Up Button/light fill shortcut Button
8. Right Button/shortcut Button for timing photo
9. M Button
10. Down Button/Delete Button
11. Left Button/shortcut Button for continuous photo taking
12. Menu Button/Menu return Button
13. Playback Button

Top side view

1. Power button
2. Photo button

Bottom side view

1. Tripod interface
2. Battery/memory card slot

Left side view

• Type-C USB interface

Charging the battery

1. Turn off the power of the camera, open the battery cover, insert the battery in the direction shown in the figure below, and then close the battery cover.
2. You can use the supplied USB cable to charge your camera via an adapter (5V/1A~5V/2A).
   • The charging indicator will be turned on in red when the battery is charging.
   • The charging indicator will be turned off automatically when the battery is fully charged.
   • Normally, it takes around 2 hours to fully charge the battery.
   • When the battery is fully charged, the battery life is around 70 minutes for recording.

FAQ

• Q: What is the maximum external memory capacity supported?
  A: The camera supports Micro SD cards up to 128GB, above Class 10.

• Q: What file formats are supported for videos and photos?
  A: Videos are saved in MP4 format and photos are saved in JPEG format.

• Q: How long does it take to fully charge the battery?
  A: It takes around 2 hours to fully charge the battery.

• Q: What is the working temperature range of the camera?
  A: The working temperature range is not specified.

Special Instructions

In photo mode or video mode: when shooting at close range (10cm-50cm or 3.93-19.68 inches) or when switching between far and near scenes（Far scenes refers to a range from 50cm (19.68 inches) to infinity）, please half-press the “photo button.” When the prompt box on the screen changes from “red” to “green,” the AF (autofocus) function is enabled, allowing for sharp focus.

FHD-1920×1080 ( 60 / 30FPS ) , HD- 1280×720 ( 120 / 60 / 30FPS )
LCD Display| IPS 2.4 inch
Auto Focus| The focus clear range is 10cm to Infinity
External Memory| Micro SD card ( UP to 128GB ) , Above Class 10
Digital Zoom| 16X Digital Zoom
Exposure| EV-3~EV + 3
Dimension| 100 60 24MM
White Balance| Auto / Daylight / Cloudy / Fluorescent /Incandescent
Photo Flash| < 1 meter; ON / AUTO / OFF
Self-timer| OFF/ 3S/ 5S / 10S / 20S
File Format| JPEG ( Still image ) / MP4 ( Video )
---|---
Video Flash| < 1meter; ON / OFF
Continuous Shooting| 3P / S
System Requirements| Windows XP / VISTA / 7 / 10,Mac OS
Working Temperture| 0-40°C
Battery| Lithium battery

WARNING

To reduce the risk of fire or electric shock,

1. Do not expose the unit to rain or moisture.
2. Do not place objects filled with liquids, such as vases, on the apparatus.
3. Do not expose the batteries to excessive heat such as sunshine, fire or the like.
4. Do not ingest battery, chemical burn hazard.
5. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. 6.)If you think batteries might have been swallowed or placed inside any part of body, seek immediate medical attention.

CAUTION

If the battery is mishandled, the battery pack can burst, cause a fire or even chemical burns. Observe the following cautions.

• Do not disassemble.
• Do not crush and do not expose the battery pack to any shock or force such as hammering,dropping or stepping on it.
• Do not short circuit and do not allow metal objects to come onto contact with the battery terminals.
• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a car parked in the sun.
• Do not incinerate or dispose of in fire.
• Do not handle damaged or leaking lithium ion batteries.
• Keep the battery pack out of the reach of small children.
• Keep the surface of the battery pack dry.
• Replace the battery with the specified type only. Otherwise, burst, fire or injury may result.
• Dispose of used batteries according to the instruction.
• Use a nearby wall outlet(wall socket) when using the AC Adapter/Battery charger. If any malfunction occurs, disconnect the plug from the wall outlet (wall socket) immediately to disconnect from the
• power source. If you use the product with a charge lamp, note that the product is not disconnected from the power source even when the lamp turns off.
• Do not use the AC adapter/Battery charger placed in a narrow space, such as between a walland furniture.
• If static electricity or electromagnetism cause data transfer to discontinue midway (fair), restart the application or disconnect and connect the communication cable (USB, etc.) again.

About the camera

System requirement
Users can ransfer videos and photos to computers with the following configurations:
Intel Pentium 2.0GHz or higher/ Microsoft Windows XP or higher operating system 2GB RAM 40GB above available disk memory/ Standard USB interface / 1GB GPU or higher 1920×1080 pixel or higher resolution.

Parts and controls

1. Fill light
2. Lens
3. Display screen
4. Charging/working indicator light
5. Digital zoom zoom in
6. Digital zoom out
7. Up Button/light fill shortcut Button
8. Right Button/shortcut Button for timing photo
9. M Button
10. Down Button/Delete Button
11. Left Button/shortcut Button for continuous photo taking
12. Menu Button/Menu return Button
13. Playback Button

Top side view
Bottom side view

Left side view

Pause of recording
PHOTO| Take photo
Start/end recording
Half press to focus
Indicator light| Red charging indicator/Blue working indicator
“+”| Digital zoom zoom in
“-“| Digital zoom zoom out
Up| Upward
Turn on/off the fill light
Right| Rightward
Short press in photo mode to switch to timing photo
M| Confirm
Short press to switch between video mode and photo mode
Down| Downward
Delete photo/video
Left| Leftward
Short press in camera mode to switch to continuous camera
MENU| Open/exit menu settings and system settings
Playback| Open/Exit Media Playback
USB| USB cable charging
Connect the computer with USB cable

Charging the battery

1. Turn off the power of the camera, open the battery cover, insert the battery in the direction shown in the figure below, and then close the battery cover.
2. You can use supplied USB cable to charge your camera via a adapter (5V/1A~5V/2A) .
   • The charging indicator will be turned on in red when the battery is in charging.
   • The charging indicator will be turned off automatically when the battery is fully charged.
   • Normally it takes around 2 hours to full charging of the battery. When the battery is fully charged, the battery life is around 70 minutes for recording.

Power on/off the camera

• Press the power button, the camera will turn on automatically.
• To turn off the camera, press and hold the power button for 3 seconds. Note: When you turn on the camera for the first time, you need to press and hold the power button to turn it on.When there is no battery in the battery compartment, you need to press and hold the power button to turn on the camera after you put the battery in.

Set the camera

You can make custom settings of the camera.
After the camera is turned on, press the menu button to open the menu settings.

Japanese/Korean/Russian/German/ French/Italian/ Spanish/Portuguese/Thai
---|---
Date Time| Year/Month/Day Hour/Minute/Second
Format| (TF Card)Format/Cancel
Firmware Version| Product model and version number
Factory To Reset| Confirm/Cancel

Insert and format the memory card

A class 10 or higher speed memory card is recommended to normal use.

1. Open the battery cover, and insert the memory card until hear the “click” sound.
2. To remove the memory card, open the cover and push the memory card it will be popup automatically.

Format the memory card
It is recommended to format the memory card before the first use. Format the memory card, press the menu button to open the menu, then press the left or right button to switch to system settings. Press the Up or Down button until “Format,” then press the M button to get the sub menu. Select Format to format the memory card.

Note: If the memory card is not formatted, a prompt will pop up on the screen: “Unsupported file system, do you want to format?”, please format the memory card according to the above operation. Formatting the memory card will erase all data stored on it, and the data will be unrecoverable. Save important data to your PC before formatting.

Using the camera

After the camera is turned on, it defaults to video shooting mode. Press the M button to switch between photo mode and video mode, press the menu button to enter the menu to set other modes.

The camera supports setting the corresponding mode menu in different modes.
After selecting the desired mode, press the menu button to enter the menu and select the desired setting if desired.
Press the photo button to take a photo, and the photo will be automatically saved to the memory card.
In video mode, press the photo button to start recording, and press the photo button again to stop recording. During recording, you can also press the power button to pause/continue recording.

1. Photo button (video start/end button)
   Press to start recording, then press to end recording

2. Indicator light
   The working indicator light flashes when recording

3. Digital zoom button
   “+” button digital zoom zoom in/”-” button digital zoom zoom out.

Fill light
In video mode, pressing the up button can quickly turn on or off the fill light.
In photo mode, the fill light has three flash modes and pressing the up button can quickly switch between the three modes.

Note: When switched to forced flash mode, the fill light will always be on.

Playback
Press the playback button to enter media playback. Press Left/Right button to view videos and images stored in camera memory card.

Current/total number of images

1. You can use”+” “-” to zoom in and out when viewing photos

2. Press the down button to delete a photo/video.
   Note : Once deleted, it cannot be recovered.

3. Press the M button to play/pause a video.

Connect to computer

1. Connect the Type-C USB port of the camera and the USB port of the computer with supp lied USB cable.
2. The camera will turn on automatically and the screen will display the available options. Press the Up/Down button to select the desired option, then press the M button to confirm the setting.

Charging Mode
Select the charging mode, and the camera supports normal recording functions.
The camera will charge fully faster when powered off.

USB Mode
Select “USB mode,” and the computer will display the camera’s memory card drive. You can transfer files from the storage to the computer.

PC Camera
Select the “PC Camera” mode, and the camera can be used as a webcam for live streaming, etc.
Note: When the camera is used as a webcam, only the digital zoom button can be operated on the camera, and other functions cannot be used.

Camera cleaning and maintenance

1. If you do not use the camera for a long time, remove the camera battery and place it in a dust-free, dry environment with a temperature no higher than 30℃.
2. In order to extend the service life of the battery, please discharge it completely before storage.
3. Please fully discharge the battery at least once every 3 months after it has been fully charged.
4. If there is dust or dirt on the lens or screen, gently wipe it with a clean, soft lens cleaning cloth.
5. As this device is a precision instrument, please do not drop it or subject it to strong impacts or vibrations.

Troubleshooting:

If you encounter problems with the camera, please refer to this section.

1. The camera cannot be turned on after installing the battery

2. The battery power is insufficient, please replace the battery with a new one or charge the battery.

3. The battery is installed in reverse, please confirm that the battery is installed correctly.

4. The battery insulating paper has not been removed.

5. The battery is not charging

6. If the red light of the charging indicator flashes, the battery is not in place, or the contact is poor. Please reinstall the battery until the indicator light is on (the indicator light goes out when the battery is fully charged).

7. The charging indicator light is off, and the charger is not plugged in properly. Please check whether the charger is connected correctly.

8. The ambient temperature is lower than 10℃, which may lead to slow charging or failure to charge.

9. Camera crashes
   Quickly pressing each button of the camera may cause the camera to freeze. After it crashes, remove the battery and restart.
   Tip : When the camera is recording or taking pictures, do not quickly press the camera button. Under normal circumstances, the camera will display a waiting icon.

10. The memory card cannot be recognized:

11. Please check whether the memory card is a Micro SD card (class10) and not larger than 128GB.

12. Please check whether the memory card is inserted backward.

13. When using the memory card with the camera for the first time, it is recommended to format it first.

14. Additional notes

15. Do not insert any object into the slot except the memory card.

16. After turning the power on, the camera may display an unstable image for a few seconds, but this is not a fault.

17. Due to the optical properties of the lens, there may be color dispersion (magnification of chromatic aberration) at the edges of the image. This is not a camera fault.

18. It is normal for the memory card to get hot after a long period of use.

19. It is normal for the camera’s screen to heat up after a long period of use

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>