voominhtec Clip On Solar Lights Outdoor Instruction Manual
- June 17, 2024
- voominhtec
Table of Contents
Instructions for the solar Light
Assembly Instructions
- For the first time use or if the light has not been used for a long time,charge the light by placing it in direct sunlight for 1-2 days.At winter and cloudy day,the lights may not illuminate well due to the soft sunlight.
- Before charging,press the switch button to tum ON the lights
- With the screws provided,attach the clip light to fence or wall.Recommended height:1.8-2.2 meters.
① Solar panel:To collect sunlight and charge the battery
② PIR sensor:For motion sensor function
③ Switch:ON/OF
How does these lights work?
- Press once – Mode1:Strong light sensor mode & Dim light mode
- Press twice – Mode 2:Strong light sensor mode
- Press third – Mode 3:Keep Dim light mode
Mode 1: It stays on dim mode at night and change to strong light mode for
15 seconds when detecting motion.
Mode 2: It will turn on strong light about 15 seconds when it detects
motion and turn off automatically.
Mode 3: It tums on at night and stay dimly all night without motion
sensor.
How to install solar lights ?
Replacing Rechargeable Battery?
The Li-ion Battery 2000mAh was included in the solar lights,and you do not
need to install.
If you want to replace the battery after some time using, please follow the
below instructions.
- Press the manual switch to the“OFF” position.
- Open the battery compartment lid and remove the old battery then replace it with a new Li-ion Battery rechargeable battery.
If you have any questions about the product, please contact us,voominhtec_bxj@163.com
MADE IN CHINA
Documents / Resources
|
voominhtec Clip On Solar Lights
Outdoor
[pdf] Instruction Manual
Clip On Solar Lights Outdoor, Clip, On Solar Lights Outdoor, Solar Lights
Outdoor, Lights Outdoor, Outdoor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>