LG 32LC7D Smart LED and LCD TV User Guide

LCD TV PLASMA TV
OWNER’S MANUAL

32LC7D Smart LED and LCD TV

LCD TV MODELS
32LC7D
32LC7DC
37LC7D
42LC7D
32LG10| PLASMA TV MODELS
42PC5D
42PC5DC
50PC5D
50PC5DC
---|---

User’s Guide Specification

1. Model Description****
   | Park SY
   07.06.29| KANG
   KWANG SUK
   07.06.29
   ---|---|---
   MODEL| 32/37/42LC7D-UK
   42/50PC5D-UL| BRAND| LG| Part No.| MFL34797033
   (0807- R EV04)
   SUFFIX| USA| Product Name| 32/37/42LC7D,
   42/50PC5D

2. Printing Specification
   1. Trim Size (Format) : 185mm x 260 mm
   2. Printing Colors
   • Cover : 1 COLOR (BLACK)
   • Inside : 1 COLOR (BLACK)
   3. Stock (Paper)
   • Cover : Coated paper , S/White 150 g/㎡
   • Inside : Uncoated paper , 백상지 60 g/㎡
   4. Printing Method : Off set
   5. Bindery : Saddle stitch
   6. Language : English (1)
   7. Number of pages : 32
   NOTES
   “This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level, Details should be followed Eco-SCM management standard[LG(56)-A-2524].
   Especially, Part should be followed and controlled the following specification.
   (1)Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.
   (2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.

3. Special Instructions
   (1) Origin Notification*** LGEMX : Printed in Mexico

• LGERS : Printed in Mexico
• LGEAZ : Printed in Brazil
• LGESP : Printed in Brazil
• LGESY : Printed in China| * LGENT : Printed in China
• LGENP : Printed in China
• LGEIL : Printed in India
• LGEDI : Printed in Indonesia
• LGEIN : Printed in Indonesia| * LGEMA : Printed in Poland
• LGEWA : Printed in U.K.
• LGEEG : Printed in Egypt
• LGERA : Printed in Russia
• LGEAK : Printed in Kazakhstan
• LGETH : Printed in Thailand
• LGEVN : Printed in Vietnam
  ---|---|---
  4. Changes**
  9| | | |
  ---|---|---|---|---
  8| | | |
  7| | | |
  6| | | |
  5| | | |
  4| Jul./01/08| Yang Hyo-Mi| S8-24394| Added the model name and corrected the safety instruchions
  3| Jan./09/07| Park sun young| S8-05245| Changed inch form.
  2| Nov./01/07| Park sun young| S7-97591| Changed antenna contents and Simplink function.
  1| Sep./14/07| Park sun young| S7-95015| Applied PQ test results.
  REV. NO.| MM/DD/YY| SIGNATURE| CHANGE NO.| CHANGE CONTENTS**

Pagination sheet
P/NO.MFL34797033
Total pages : 32 pages

Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this information to your dealer when you require service.
An extended owner’s manual that contains information on the advanced features of these LG TV sets is located on the CD-ROM provided in an electronic version.
To read these files, you will need to use personal computer (PC) equipped with a CD-ROM drive.
P/NO : MFL34797033 (0807-REV04)
Printed in Korea

ENERGY STAR is a set of power-saving guidelines issued by the U.S.
Environmental Protection Agency(EPA).
As an ENERGY STAR
Partner LGE U. S. A.,Inc.
has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

WARNING / CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the  grounding system of the building, as close to the point of the cable entry as practical.

WARNING / CAUTION
To prevent fire or shock hazards, do not expose this product to rain or moisture.
FCC NOTICE
Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CAUTION
Do not attempt to modify this product in any way without written authorization from LG Electronics.
Unauthorized modification could void the user’s authority to operate this product

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

1. Do not use this apparatus near water.

2. Clean only with dry cloth.

3. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat.

5. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades  and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for  replacement of the obsolete outlet.

6. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
   

7. Only use attachments/accessories specified by the manufacturer.
   

8. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
   

9. Unplug this apparatus during lighting storms or when unused for long periods of time.

10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

11. Never touch this apparatus or antenna during a thunder or lighting storm.

12. When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV.

13. Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.

14. CAUTION concerning the Power Cord: It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock.
    Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue  use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not make the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

15. WARNING – To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning.

16. Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).

17. GROUNDING
    Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded   C outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
    Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
    

18. DISCONNECTINE DEVICE FROM MAINS
    Mains plug is the disconnecting device. The plug must remain readily operable.

19. Keep the product away from direct sunlight.

20. ANTENNAS
    Outdoor antenna grounding
    If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.
    Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
    Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.
    Antenna grounding according to the National Electrical Code, ANSI/NFPA 70
    

21. Cleaning
    When cleaning, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur.
    Do not clean with chemicals such as alcohol, thinners or benzene.

22. Moving
    Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs.
    Do not press against or put stress on the front panel of the TV. Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials (e.g.) plastic while plugged in. Do not install in excessively dusty places.

23. Ventilation
    If you smell smoke or other odors coming from the TV or hear strange sounds, unplug the power cord contact an authorized service center.

On Disposal (Only Hg lamp used LCD TV)
The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.

HOW TO USE THE OWNER’S MANUAL ON THE CD-ROM
To view the Owner’s Manual on the CD-ROM, Adobe Acrobat Reader must be installed on your PC.
The “ACRORD” folder on the CD-ROM contains the installation programs for them.
If you want to install those programs, Open the “My Computer” → Open the “LG” → Open the “ACRORD” double-click your language.

TO VIEW THE OWNER’S MANUAL ON THE CD-ROM
The Owner’s Manual files are included in the supplied CD-ROM.
Load the supplied CD-ROM into the CD-ROM drive of your PC.
After a while, the web page of the CD-ROM will open automatically. (for Window only)

NOTE
► If the web page does not appear automatically, open the Owner’s Manual file directly.
Open the “My computer” → Open the “LG” → Open the “index.htm” file.

PREPARATION

ACCESSORIES
Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product.
User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product.
The accessories can be different from the figures shown here.
For further information, see the the Owner’s Manual files supplied CD-ROM.

| | | |
---|---|---|---|---
Owner’s Manual| CD Manual
(Refer to p.5)| Remote Control,
Batteries| Power Cord| 75ohm Round Cable
(This feature is not available for
all models)

Polishing Cloth

• Slightly wipe stained spot on the exterior only with the polishing cloth for the product exterior if there is stain or fingerprint on surface of the exterior.
• Do not wipe roughly when removing stain. Please be cautions of that excessive pressure may cause scratch or discoloration.

For Plasma TV models
This feature is not available for all models

|
---|---
2-Eye-bolts
(Refer to p.14)| 2-Wall brackets
(Refer to p.14)

Option Extras

D-sub 15 pin Cable

For LCD TV models

This feature is not available for all models

| | |
---|---|---|---
Cable
Management| 2- TV Bracket Bolts
(Refer to p.14)| 2- TV Brackets,
2- Wall Brackets
(Refer to p.14)| Twist Holder
Arrange the wires with the twist holder.

32LC7D/7DC,37LC7D, 32LG10 only

4-Bolts for stand assembly
(Refer to p.15)

FRONT PANEL INFORMATION

• Here shown may be somewhat different from your TV.
• NOTE: If your product has a protection tape attached, remove the tape.
  And then wipe the product with a cloth (If a polishing cloth is included with your product, use it).

Front Panel Controls
Plasma TV Model

LCD TV Model

BACK PANEL INFORMATION

• Here shown may be somewhat different from your TV.

Plasma TV Model

LCD TV Model

1. HDMI/DVI IN 1, HDMI IN 2
   Connect a HDMI (DVI) connection to either input.

2. COMPONENT IN
   Connect a component video/audio device to these jacks.

3. RGB (PC)
   Connect the output from a PC.

4. AUDIO (RGB/DVI)
   Connect the audio from a PC or DTV.

5. SERVICE
   Remote Control Port
   Connect a wired remote control.

6. ANTENNA/CABLE IN
   Connect over-the air signals to this jack.
   Connect cable signals to this jack.

7. DIGITAL AUDIO OUT
   Connect digital audio from various types of equipment.
   Note: In standby mode, these ports do not work.
   RS-232C IN (CONTROL & SERVICE) PORT
   For external control devices.

8. AUDIO OUT
   Connect analog audio to various types of equipment.

9. AV (Audio/Video) IN
   Connect audio/video output from an external device to these jacks.

10. S-VIDEO
    Connect S-Video out from an S-VIDEO device.

11. Power Cord Socket
    For operation with AC power.
    Caution: Never attempt to operate the TV on DC power.

REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.

Installing Batteries

• Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, – with -).
• Install two 1.5V AA batteries. Don’t mix old or used batteries with new ones.
• Close cover.

Remote control effective range

• Use a remote control up to 7 meters distance and 30 degree (left/right) within the receiving unit scope.
• Dispose of used batteries in a recycle bin to preserve environment.

BACK COVER FOR WIRE ARRANGEMENT

• Here shown may be somewhat different from your TV.

Plasma TV Model

1. Hold the CABLE MANAGEMENT with both hands and pull it backward as shown.
   

2. Connect the cables as necessary.
   To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section.

3. Install the CABLE MANAGEMENT as shown.
   

LCD TV Model

1. Connect the cables as necessary.
   To connect an additional equipment, see the
   EXTERNAL EQUIPMENT SETUP section.

2. Install the CABLE MANAGEMENT as shown.
   

3. Bundle the cables using the supplied TWISTER HOLDER.
   (This feature is not available for all models.)
   NOTE
   ► Do not hold the CABLE MANAGEMENT when moving the product.
   • If the product is dropped, you may be injured or the product may be broken.
   

How to remove the CABLE MANAGEMENT
► Hold the CABLE MANAGEMENT with both hands and pull it backward.
ATTACHING THE TV TO A WALL

• This feature is not available for all models.
• Here shown may be somewhat different from your TV.

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.

• Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
• If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
  Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.
  Ensure the eye-bolts or brackets are tightened securely.
  ■ Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4inches on all four sides from the wall.

CAUTION ► Ensure adequate ventilation by following the clearance recommendations.

STAND INSTALLATION (Only 32LC7D/7DC, 37LC7D, 32LG10)

1. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage.

2. Assemble the product stand with the product as shown. 

3. Securely install the 4 bolts provided.

VESA WALL MOUNTING
This product accepts a VESA-compliant mounting interface pad. (optional)
There 4 threaded holes are available for attaching the bracket.

NOTE
► Screw length needed depends on the wall mount used. For further information, refer to the VESA
Wall Mounting Instruction Guide.

ANTENNA OR CABLE CONNECTION

1. Antenna (Analog or Digital)
   Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections.
   For optimum picture quality, adjust antenna direction if needed.
   

2. Cable
   

• To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.
• If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
• If the antenna is not installed properly, contact your dealer for assistance.

NOTE ► The TV will let you know when the analog, cable, and digital channel scans are complete.

EXTERNAL EQUIPMENT SETUP

• To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
• This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model.

HD RECEIVER SETUP
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

When connecting Component cable

1. How to connect
   1. Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO 1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red).
   2. Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO 1 jacks on the set.
   

2. How to use
   ■ Turn on the digital set-top box.
   (Refer to the owner’s manual for the digital set-top box. operation)
   ■ Select COMPONENT 1 input source by using the IINNPPUUTT button on the remote control.
   ■ If connected to COMPONENT IN2 input, select COMPONENT 2 input source.

Signal| Component 1/2| HDMI1/DVI,
HDMI2
---|---|---
480i| Yes| No
480p| Yes| Yes
720p| Yes| Yes
10 8 0 i| Yes| Yes
10 8 0 p| Yes| Yes

Y, CB/PB, CR/PR

Resolution| Horizontal
Frequency(KHz)| Vertical
Frequency(Hz)
---|---|---
720x480i| 15.73
15.73| 59.94
60.00
720x480p| 31.47
31.50| 59.94
60.00
1280x720p| 44.96
45.00| 59.94
60.00
1920x1080i| 33.72
33.75| 59.94
60.00
1920x1080p| 26.97
27.00
33.71
33.75
67.432
67.50| 23.976
24.00
29.97
30.00
59.94
60.00

EXTERNAL EQUIPMENT SETUP

DVD SETUP
When connecting Component cable

1. How to connect
   1. Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO 1 jacks on the set.
   Match the jack colors
   (Y = green, PB = blue, and PR = red).
   Connect the audio outputs of the DVD to the COMPONENT IN AUDIO 1 jacks on the set.

2. How to use
   ■ Turn on the DVD player, insert a DVD.
   ■ Select COMPONENT 1 input source by using the IN PUT button on the remote control.
   ■ If connected to COMPONENT IN 2 input, select COMPONENT IN 2 input source.
   ■ Refer to the DVD player’s manual for operating instructions.
   

When connecting HDMI cable

1. How to connect
   Connect the HDMI output of the DVD to the HDMI/DVI IN 1 or HDMI IN 22 jack on the set.
   1 No separated audio connection is necessary.
   2 HDMI supports both audio and video.

2. How to use
   ■ Select HDMI1 or HDMI2 input source by using the IN PUT button on the remote control.
   ■ Refer to the DVD player’s manual for operating instructions.
   

VCR SETUP
When connecting with a RCA cable

1. How to connect
   Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red)

2. How to use
   ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
   ■ Select A V 11 input source by using the IN PUT button on the remote control.
   ■ If connected to AV IN2, select AV2 input source.
   

NOTE
► If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the set.

NOTE
► The picture quality is improved: compared to normal composite (RCA cable) input.

When connecting with an S-Video cable

1. How to connect
   1. Connect the S-VIDEO output of the VCR to the S -VIDEO input on the set.
   2. Connect the audio outputs of the VCR to the AUDIO input jacks on the set.

2. How to use
   ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
   ■ Select AV 11 input source by using the IN PUT button on the remote control.
   ■ If connected to AV IN2, select AV2 input source.

NOTE
► The picture quality is improved: compared to normal composite (RCA cable) input. 

CAUTION
► Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work.

PC SETUP
When connecting D-sub 15pin cable

1. How to connect
   1. Connect the RGB output of the PC to the RRGGBB (PC) jack on the set.
   2. Connect the PC audio output to the AUDIO (RGB/DVI) jack on the set.

2. How to use
   ■ Turn on the PC and the TV.
   ■ Select RGB–PC input source by using the IN PUT button on the remote control.

When connecting HDMI to DVI cable

1. How to connect
   1. Connect the DVI output of the PC to the HDMI/DVI IN 1 jack on the set.
   2. Connect the PC audio output to the AUDIO (RGB/DVI) jack on the set.

2. How to use
   ■ Turn on the PC and the TV.
   ■ Select HDMI 1 input source by using the INPUT button on the remote control.
   Supported Display Specifications RGB-PC, HDMI1/DVI-PC mode

When connecting HDMI to DVI cable

1. How to connect
   1. Connect the DVI output of the PC to the HDMI/DVI IN 1 jack on the set.
   2. Connect the PC audio output to the AUDIO (RGB/DVI)) jack on the set.

2. How to use
   ■ Turn on the PC and the TV.
   ■ Select HDMI1 input source by using the INPUT button on the remote control.

Supported Display Specifications
RGB-PC, HDMI1/DVI-PC mode

Resolution| Horizontal
Frequency(KHz)| Vertical
Frequency(Hz)
---|---|---
640×350| 31.469| 70.08
720×400| 31.469| 70.08
640×480| 31.469| 59.94
800×600| 37.879| 60.31
1024×768| 48.363| 60.00
1280×768| 47.776| 59.87
1360×768| 47.72| 59.799
1366×768| 47.13| 59.65

• RGB-PC mode only
• LCD TV only

NOTE
► Depending on graphic card and signal status, there can be some shaking to find best picture in a little time.

WATCHING TV

TURNING ON TV

1. First, connect power cord correctly.
   At this moment, the TV switches to standby mode.
   ■ In standby mode to turn TV on, press the , INPUT, CH (▲ or ▼) button on the TV or press the POWER, INPUT, TV IN PUT, CH (▲ or ▼), Number (0~9) button on the remote control.

2. Select the viewing source by using the TV IN PUT, INPUT button on the remote control.
   ■ This TV is programmed to remember which power state it was last set to, even if the power cord is out.

3. When finished using the TV, press the POWER button on the remote control.
   The TV reverts to standby mode.

NOTE
► If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

CHANNEL SELECTION

1. Press the CH (D or E) or NUMBER buttons to select a channel number.

VOLUME ADJUSTMENT
Adjust the volume to suit your personal preference.

1. Press the VOL (▲ or ▼) button to adjust the volume.
2. If you want to switch the sound off, press the MUTE button.
3. You can cancel the Mute function by pressing the MUTE or VOL (▲ or ▼) button.

CHANNEL SEARCH
Auto Scan (Auto Tuning)
Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.
Run Auto Tuning again after any Antenna/Cable connection changes.
A password is required to gain access to Auto Tuning menu if the Lock System is turned on.

1. Press the MENU button and then use DD or EE button to select the SETUP menu.
2. Press the ► button and then use ▲ or ▼ button to select Auto Tuning.
3. Press the ENTER button to begin the channel search.
   Allow Auto Tuning to complete the channel search cycle for ANTENNA and CABLE.

NOTE

ON-SCREEN MENUS SELECTION

Your TV’s OSD (On Screen Display) may differ slightly from what is shown in this manual.

1. Press the MENU button and then use ▲ or ▼ button to select the each menu.
2. Press the ► button and then use ▲▼ ◄► button to display the available menus.

SETUP

Auto Tuning| ■ All available TV channels are searched and stored automatically.
---|---
Manual Tuning| ■ User can do manual channel selection and add or delete individual channels.
Channel Edit| ■ You can add or delete in the channel list.

PICTURE

Picture Mode| ■ Select the preset value in the Picture Mode menu based on the program category: Dynamic, Standard, Mild, User1, User2.
---|---
Color Temperature| ■ Choose one of three automatic color adjustments : Cool, Medium, Warm, User
XD| ■ It is LG Electronic’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm.
■ Select Auto or Manual (XD Contrast, XD Color, XD Noise).
Advanced| ■ Cinema 3:2 Mode (On, Off)
Set up the TV for the best picture appearance for viewing movies.
■ Black Level (Low, High)
Adjusting the contrast and the brightness of the screen using the black level of the screen.
Aspect Ratio| ■ Select the desired picture format. : Set by program, 4:3, 16:9, Zoom1, Zoom2, Just Scan.
Picture Reset| ■ Use to quickly reset all the Picture menu options to their original factory preset values.
Screen| ■ Adjust the screen Resolution, Position, Size, Phase, Reset.

AUDIO

Sound Mode| ■ Sound Mode lets you enjoy the best sound without any special adjustment. : Standard, Music, Movie, Sports and User
---|---
Auto Volume| ■ Scans for changes in sound levels during commercials, then adjusts the sound to match the specified audio level.
Balance| ■ Adjust the left/right sound of speaker.
TV Speaker| ■ Turn the TV speaker On or off.

TIME

Clock| ■ Auto: The time is set automatically from a digital channel signal.
Select your viewing area time zone.
Select Auto, Off, On depending on whether or not your viewing area observes Daylight Saving time.
■ Manual: Set the clock manually.
---|---
Off Time| ■ Select On or Off.
On Time| ■ Select On or Off.
Sleep Time| ■ Select the amount of time before your TV turns off automatically: Off, 10, 20, 30, 60, 90, 120, 180, 240.
Auto Sleep| ■ TV will be automatically turned off, in case of no signal for 10 minutes.

OPTION

Language| ■ Select your desired language for on screen menus : English, Spanish, French.
---|---
Input Label| ■ Set a label to each input source.
SimpLink| ■ Control and play other AV devices connected to the TV through HDMI cable without additional cables and settings.
key Lock| ■ This feature can be used to prevent unauthorized viewing by locking out the front panel controls.
Caption| ■ Mode: When selecting Off, Submenus for Analog, DTV, and Digital Option become disabled.
■ Analog: CC1~ CC4 , Text1~ Text4.
■ Digital: Service1~ Service6
■ Digital Option: Customize the DTV/CADTV captions that appear on your screen.
ISM Method| ■ Use it to minimize any fixed image on the screen. : Normal, Orbiter, Inversion, White Wash.
Low Power| ■ Reduces the plasma display power consumption.
Set ID| ■ Choose the desired TV ID number.

LOCK

programs, according to the ratings limit set.
TV Rating-General| ■ Based on the ratings, blocks certain TV programs that you and your family do not want to view.
TV Rating-English| ■ Selecting canadian english language rating system.
TV Rating-French| ■ Selecting canadian french language rating system.
Downloadable
Rating| ■ This function may become available in the future and will be available only for digital channel signal.
Input Block| ■ Enables you to select a source to block from the external source devices you have hooked up.

APPENDIX

TROUBLESHOOTING

The operation does not work normally.

The remote control
doesn’t work| ■ Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV.
■ Ensure that the batteries are installed with correct polarity (+ to +, – to -).
■ Ensure that the correct remote operating mode is set: TV, VCR etc.
■ Install new batteries.
---|---
Power is suddenly
turned off| ■ Is the sleep timer set?
■ Check the power control settings. Power interrupted.
■ No broadcast on station tuned with Auto off activated.

The video function does not work.

No picture &No sound| ■ Check whether the product is turned on.
■ Try another channel. The problem may be with the broadcast.
■ Is the power cord inserted into wall power outlet?
■ Check your antenna direction and/or location.
■ Test the wall power outlet, plug another product’s power cord into the outlet where the product’s power cord was plugged in.
---|---
■ C25:D30Check antenna (Change the direction of the antenna).| ■ This is normal, the image is muted during the product startup process. Please
contact your service center, if the picture has not appeared after five minutes.
No or poor color or poor picture| ■ Adjust Color in menu option.
■ Keep a sufficient distance between the product and the VCR.
■ Try another channel. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking| ■ Check for local interference such as an electrical appliance or power tool.
Poor reception on some channels| ■ Station or cable product experiencing problems, tune to another station.
■ Station signal is weak, reorient antenna to receive weaker station.
■ Check for sources of possible interference.
Lines or streaks in pictures| ■ Check antenna (Change the direction of the antenna).

The audio function does not work.

Picture OK & No sound| ■ Press the VOL or VOLUME button.
■ Sound muted? Press MUTE button.
■ Try another channel. The problem may be with the broadcast.
■ Are the audio cables installed properly?
---|---
No output from one
of the speakers| ■ Adjust Balance in menu option.
Unusual sound from inside the product| ■ A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the
product.

There is a problem in PC mode. (Only PC mode applied)

The signal is out of range| ■ Adjust resolution, horizontal frequency, or vertical frequency.
■ Check the input source.
---|---
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position| ■ Work the Auto configure or adjust clock, phase, or H/V position. (Option)
Screen color is unstable
or single color| ■ Check the signal cable.
■ Reinstall the PC video card.

MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

Cleaning the Cabinet

• To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
• Please be sure not to use a wet cloth.

Extended Absence
CAUTION
► If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges.

PRODUCT SPECIFICATIONS

MODELS| 42PCSD (42PC5D-UL)
42PCSDC (42PC5DC-UL)| 50PCSD (50PC5D-UL)
50PCSDC (50PC5DC-UL)
---|---|---
Dimensions
(Width x Height x Depth)| Including stand| 41.3 x 30.2 x 12.2 inches
1048.0 x 766.0 x 310.0 mm| 48.9 x 34.9 x 14.6 inches
1242.0 x 8876 x 370.0 mm
Excluding stand| 41.3 x 28.1 x 3.3 inches I 48.9 x 32.6 x 3.5 inches
1048.0 x 713.0 x 83.5 mm 1242.0 x 82Z2 x 88.0 mm
Weight| including stand
excluding stand| 61.7 pounds / 28.0 kg
54.2 pounds / 24.6 kg| 86.6 pounds / 39.3 kg
76.3 pounds / 34.6 kg
Power requirement
Television System
Program Coverage
External Antenna Impedance| AC100-240V – 50/60Hz
NTSC-M, ATSC, 64 & 256 QAM
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
75 ohm
Environment condition| Operating Temperature Operating Humidity| 32 – 104T (0 – 40’C)
Less than 80%
Storage Temperature Storage Humidity| -4 – 140’F (-20 – 60t)
Less than 85%
MODELS| 32LC7D (32LC7D-UK)
32LC7DC (32LC7DC-UK)
32LG10 (32LC7D-UK)| 37LC7D
(37LC7D-UK)| 42LC7D
(42LC7D-UK)
---|---|---|---
Dimensions
(Width x Height x Depth)| Including stand| 31.8 x 23.9x 9.8 inches
806.6 x 606.5 x 249.0mm| 36.5 x 27.3 x 11.0 inches
927.0 x 692.8 x 280.5 mm| 40.7 x 29.5 x 11.3 inches
1033.4 x 750.0 x 287.6 mm
Excluding stand| 31.8 x 21.7 x 3.1 inches
806.6 x 552.3 x 79.0 mm| 36.5 x24.8 x 3.5 inches
927.0 x 630.0 x 88.0 mm| 40.7 x 27.0x 3.5 inches
1033.4 x 686.8 x 88.5 mm
Weight| including stand
excluding stand| 30.2 pounds / 13.7 kg
24.7 pounds / 11.2 kg| 44.1 pounds / 20.0 kg
35.3 pounds / 16.0 kg| 54.9 pounds / 24.9 kg
45.0 pounds / 20.4 kg
Power requirement
Television System
Program Coverage
External Antenna Impedance| AC100-240V ~ 50/60Hz
NTSC-M, ATSC, 64 & 256 QAM
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
75 ohm
Environment condition| Operating Temperature Operating Humidity| 32 ~ 104°F (0 ~ 40°C)
Less than 80%
Storage Temperature Storage Humidity| -4 – 140’F (-20 – 60t)
Less than 85%

■ The specifications shown above may be changed without prior notice for quality improvement.

OPEN SOURCE SOFTWARE NOTICE
The following GPL executables and LGPL/MPL libraries used in this product are subject to the GPL/LGPL/MPL License Agreements:

GPL EXECUTABLES:
■ Linux kernel 2.6.12
■ busybox

LGPL LIBRARIES:
■ uclibc

MPL LIBRARIES:
■ Nanox

LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: Opensource@lge.com
This offer is valid for a period of three(3) years from the date of the distribution of this product by LG Electronics.
You can obtain a copy of the GPL, LGPL and MPL licenses on the CD-ROM provided with this product.
■ This software is based in part on the work of the Independent JPEG Group.
■ This software includes the Zlib compression library, developed by Jean-loup Gailly and Mark Adler.
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler

LG Electronics Inc.
https://manual-hub.com/

References

• LgCommercial.com is for sale | HugeDomains
• LG Electronics & Home Appliances | Shop Now | LG USA
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>