MAG Series MAG PANO M100L PZ Mag Pano M100l Pz & Mag Pano M100l Pz White Gaming Case User Guide
- June 16, 2024
- MAG Series
Table of Contents
- Specifications
- Accessories
- Case Features
- Side and Front View
- I/O and Buttons
- Side Panel Removal
- Front Bezel Removal
- Top Panel Removal
- Motherboard Installation
- Graphics Card Installation
- SSD Installation
- PSU Installation
- Top Panel I/O Connection
- General Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MAG Series MAG PANO M100L PZ Mag Pano M100l Pz & Mag Pano M100l Pz White
Gaming Case User Guide
Specifications
Basic Information
Case Type | Mid Tower |
---|---|
Dimensions (DxWxH) | 440 x 235 x 405 mm |
**Supported Motherboard Sizes** | Micro-ATX, Mini-ITX Supports Micro- |
ATX back-connect motherboard
Cooling Fan Support
Top | 3 x 120mm or 2 x 140mm |
---|---|
Front | No |
Rear | 1 x 120mm or 1 x 140mm |
Side | 3 x 120mm |
Bottom | 1 x 120mm |
PSU Shroud | 2 x 120mm |
Expansion Slots
PCIe Slots | 5 slots |
---|
Drive Bays
2.5″ SSD | 1 |
---|---|
3.5” HDD | 1 |
Combo 3.5″/2.5″ | 2 x 2.5” or 1 x 2.5” + 1 x 3.5” |
I/O Ports and Buttons
USB Ports | 1 x USB 3.2 Gen1 Type-A1 x USB 3.2 Gen 2×2 Type-C |
---|---|
Audio Ports | 1 x Audio/Microphone combo jack |
Buttons | 1 x Power button1 x Reset Button (can be converted to an LED |
Switch Button)
Chassis Clearances
Maximum CPU Cooler Height | 175 mm |
---|---|
Maximum GPU Length | 390 mm |
Top Radiator Support | 120 / 240 / 360 mm |
Rear Radiator Support | 120 / 140 mm |
PSU Support | 200mm |
Materials
Metal Specification | SPCC 0.7 mm |
---|---|
Front Bezel Material | 4mm tempered glass |
Left Side Panel | 4mm tempered glass |
Top Bezel | Internal plastic structure enclosed in metal |
Dust Filter | Top: Plastic filterBottom: Plastic, magnetic frame |
GPU holder | Aluminum |
Accessories
Item | Name / Q’ty | Used for |
---|
| Cable ties x5| Cable
management
| Screw M3 5mm x20| Motherboard / SSD
| Screw #6-32 5mm x8| 3.5” HDD
| Screw #6-32 6mm x6| Securing PSU / PCIe Card
| Stand-off #6-32 6.5mm x4| Motherboard Stud
| Screw #6-32 30mm x8| Securing fans on the PSU shroud
| Stand-off Mounting Tool x1| Securing stand-off
| Spare U Clip x2| Securing side panel
| GPU Holder x1| Reinforcing the graphics card
| Spirit level x1| Adjusting the horizontal of GP
| Hook-and-loop fastener x2|
Cable management
Case Features
Side and Front View
I/O and Buttons
Item | Description |
---|---|
1 | USB 3.2 Gen 2 2×2 Type-C port |
2 | USB 3.2 Gen 1 Type-A port |
3 | Audio/Microphone combo jack |
4 | Reset Button (can be converted to an LED Switch Button) |
5 | Power button |
Side Panel Removal
The side panel is held in place by snap-fit clips.
Front Bezel Removal
Before removing the front bezel, please remove the side panels on both sides
and gently pull out the front panel with your hand.
Top Panel Removal
Motherboard Installation
Graphics Card Installation
SSD Installation
PSU Installation
Top Panel I/O Connection
Please connect the 2-pin terminal of the reset button to the branch connector
of the JFP1 connector cable. Alternatively, it can be connected to a
separately purchased LED control board to serve as an LED switch button.
General Information
Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co., Ltd. All rights reserved.
The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice.
All text, images, illustrations, and other content in this manual are the property of MSI. No part of this manual may be reproduced, distributed, or used in any form without the written permission of MSI.
Revision History
- Version 1.0, 2024/01, First release.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>