Wheel Witness HD PRO Premier Super HD Dash Cam User Guide
- June 16, 2024
- Wheel Witness
Table of Contents
Wheel Witness HD PRO Premier Super HD Dash Cam
Product Information
The Wheel Witness HD PRO is a high-definition car camera designed to record video footage while driving. It is equipped with a built-in battery to ensure that recordings are completed even in the event of a power loss. The camera is configured to automatically start recording when power is received through the cigarette lighter plug and will shut off a few seconds after power is turned off. It also has a loop recording feature, where the oldest file will be overwritten with the newest once the SD card is full.
Specifications
- Resolution: High-definition
- Power Source: Cigarette lighter plug
- Battery: Built-in
- Storage: microSD card (not included)
- Loop Recording: Yes
Product Usage Instructions
Installation
-
Install a microSD card into the card slot. If you have trouble, use a penny to push it in.
-
Remove the protection tape from the Fixed Plate and install the
Plate on the Windshield Glass. We recommend cleaning the installation area with rubbing alcohol. -
Slide the Camera to the Fixed Plate and adjust the proper vertical and horizontal positions.
-
Connect the Power cord to the DC IN Camera power socket.
-
Connect the Power cord into the cigarette lighter socket in your car and start the vehicle.
Menu Operation
To access the menu, press the MENU button. Use the OK button to enter sub- menus and confirm selections. Use the left and right or up and down buttons to navigate and select items.
Setting Date & Time
To set the date and time, press the MENU button, select “Date & Time,” and then choose the year, month, day, hour, and minute. Press OK to enter the setting.
In Case of Emergency
The WheelWitness HD PRO has a built-in battery that ensures the camera finishes recording the file in case of an emergency or power loss. This helps prevent corruption of the SD card.
FAQ
Q: Where can I find detailed instructions for using the Wheel Witness HD PRO?
A: Detailed instructions can be found at http://www.wheelwitness.com/userguide.
Q: What should I do if I encounter any issues during installation?
A: If you have trouble installing the microSD card, you can use a penny to push it in. If you encounter any other issues during installation, please refer to the detailed instructions or contact customer support.
Thank you for purchasing the Wheel Witness HD PRO!
Please refer to this guide for “plug & play” operation!
Detailed instructions are available at:
http://www.wheelwitness.com/userguide
©2014 WheelWitness Inc.
INSTALLATION
-
Install microSD Card into the card slot.
(If you have trouble use a penny to push it in.) -
Remove protection tape from the Fixed Plate and install Plate on the Windshield Glass.
(We recommend you clean installation area with rubbing alcohol).
- Slide Camera to the Fixed Plate and adjust proper vertical and horizontal positions.
- Connect Power cord to the DC IN Camera power socket.
- Connect Power cord into the cigarette lighter socket in your car & start the vehicle.
PRODUCT IDENTIFICATION
- Menu Button
- OK / Manual Record Button
- Mode / Down Button
- EV / Up Button
- microSD Card Slot
- System Reset Button
- GPS Port (optional, available for sale separately)
- Red Light Indicator – Power / Charging
- Blue Light Indicator – Recording
- Green Light Indicator – GPS (optional)
- Microphone
- 170° Wide Angle Lens
- DC IN – Power Port
- HDMI Port
- USB Port
- Power Button
Menu Operation
Press “MENU” button active the Menu selection, “OK” button enter sub-menu and confirm selection left and right or up and down button to select the item.
Setting Date & Time
MENU Button [Date & Time] select Year, Month, Day, Hour, Minute Press [OK] to enter setting.
Automatic Record
The HD PRO is automatically configured to start recording anytime the power is
received through the cigarette lighter plug. The camera will shutoff a few
seconds after power is turned off. It is set to automatically loop the SD card
as well. The oldest file will be automatically overwritten with the newest
once the SD card is full.
(Default setting, can be changed in menu.)
In Case of Emergency:
The WheelWitness HD PRO is equipped with a built-‐in battery. In case of
emergency, and in the event of a power loss, this will ensure the camera
finishes recording the file and does not corrupt the SD card.
In the event of an accident, or some other case – the quickest and easiest way
to ensure you save the file is to power down the camera by disconnecting the
power cord. The camera will shut off after a few seconds. The SD card can then
be viewed with the supplier USB memory card adapter.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>