ADMETTRE STL-2206 Stainless Steel Ultrasonic Smart Humidifier User Manual

ADMETTRE STL-2206 Stainless Steel Ultrasonic Smart Humidifier

Stainless Steel Ultrasonic Smart Humidifier
Model: STL-2206

Questions or Concerns?
Please contact us with AdmettreTec@outlook.com

Package Contents

Diagram

1. Mist Nozzle
2. Mist Cover
3. LED Screen
4. Touch Button
5. Mist Tube
6. Water Tank
7. Mahout Effect Ring
8. Drain Hole
9. Atomizer
10. Air Outlet
11. DC24V Input Port
12. Air Inlet

Filling Water Guide

1. There are two ways for Filling & Refilling water o
2. The first correct way is as the Figure 1. Lift the cover at the top and slowly filling water. And then put back the cover.
3. The second way is as the Figure 2.Take the top away, and filling & refilling water to the tank directly.
4. The Figure 3 is a wrong way which filling water through the Mist nozzle.

Functions

Power ON/OFF and Mist Levels Button

| ( Power ON and default mist level – > middle level mist –>highest level mist –> Power Off )

1. The first short press on the button is POWER ON, and the machine works in lowest mist level, which is the default mist mode.
2. Then, press again, the machine works in middle level mist mode.
3. If you press again after the middle level mist, the machine will work in the highest mist level.
4. If you continue to press after the 3st step, the machine will POWER OFF. And the LED will close immediately. However the inside Fan will turn off after 15 seconds which blow away the rest fog in the product.

---|---

Timer Function

| ( 04H – > 08H –>12H –>OOH)

1. The default Timer is not enable.
2. When the machine is working on one of mist level, you can set the timer. The timer will set on the 04H –> 08H –>12H –> OOH mode, which press again and again.
3. If you press the button the first, the timer will display 04H auto leaping and flashing. And after the timer auto leaping and flashing 5 times , the timer will start work. Then, the machine will be turn off after working 4 hours.
4. And if you press on the button while is 08H/12H, the same as the 3st step.
5. And if you select the OOH mode which also as the 3st step, the Timer will turn off.

The Night Light Function|

1. The default Night Light is turn on when the machine is working on one of mist level. While the machine turn off, the Night Light will also turn off.
2. If you short press on the button, the tank light will turn on/off.
3. When the LED and tank light is light up, If you press on the button last 2 seconds, the LED and tank light will both turn off. And then you short press on the button , the LED and tank light will light up.

---|---
Control Humidifier Automatically| There are two humidity we should be clear. The one is the environment humidity around the humidifier, and another is your desired humidity which will be stored in the product chips.
The result of Control Humidifier Automatically is:

1. A. When the environment humidity around the humidifier is higher than your desired humidity, the humidifier automatically turn off.
2. B. When the environment humidity around the humidifier is lower than your desired humidity, the humidifier automatically turn on.

How to set your desired humidity to the product chips?

1. The default function is not enable. And there is a chips which store the humidity your desired .
2. When the machine is working on one of mist level, you can set your desired humidity .
3. You can set your desired humidity from 40% to 80%, and the humidity will increase 5% after you press on one time. For example, if your desired humidity is 60%, you should press on the button 5 times. When you press on button first, the chips storing your desired humidity is 40%. And the humidity will increase to 60% through another 4 times press. After these press, you should wait for 2 seconds, and then your desired humidity 60% will be stored in the chips.

| 4. Then if we have set your desired humidity 60%. The product LED will display the environment humidity around the humidifier after 2 seconds.

How to work?
5. If you have finished the 3st and 4st step. The product will turn on and off automatically by comparing your desired humidity with the environment humidity around the humidifier.

How to Clear the chips’ humidity?
6. You should press the button to humidity 80%,and then press the button more one time. It is just as a recycle.

---|---
Water shortage protection| When the tank is shortage of water. the machine will stop working. And the buzzer rings a long sound to remind. Then the digital screen will display the shortage water icon.

Cleaning

|

1. Please clean the humidifier as the operation regularly, and turn off the power before cleaning.

---|---
| 2. cleaning the water tank and the cover on the top. You can clean it with soap and water. Please remember to wipe dry.
| 3 .cleaning the LED display. Please use the dry towels which prevent the machine from water.
| 4. cleaning the Mist Tube. You can use wet towels.

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)

• This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
• To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
• Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
• Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

IMPORTANT SAFETY INSTRUCTIONS

1. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
2. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
3. unplug the appliance during filling and cleaning.

YOUR WARRANTY CARD

Here is your warranty card

• Customer name:____
• Purchase date: __ _
• Order number: __ _
• Customer E-mail: _____ _

Where did you buy? (Amazon, Walmart, Offline store)
Follow below steps to request your warranty service

1. Fill this warranty card
2. Send us the photo of the warranty card

After-sales team Email: AdmettreTec@outlook.com

• Note: We take the quality of our products and your experience very seriously, if you have any questions, please feel free to contact us, our contact information is provided here. And we will Extended 1year free warranty for you.
• Email address: AdmettreTec@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>