air tite H7T Halo Recessed Incandescent Trims Instruction Manual
- June 16, 2024
- air tite
Table of Contents
air tite H7T Halo Recessed Incandescent Trims
Product Information
Specifications
- Model Numbers : H7T, H7TNB, H7RT
- Compatible Bulbs : 75W PAR30, 75W PAR30L, 85W BR30, 100W R30, 100W A19
- Trim Options : Super TrimTM AIR-TITE Reflector, 30HAT White Trim with Haze Reflector, 30RGAT White Trim with Gold Reflector, 30CAT White Trim with Clear Specular Reflector
- Height : 5″ [127mm]
- Outside Diameter : 7-1/4″ [184mm]
Product Usage Instructions
Installation
- Ensure the power is turned off before installation.
- Select the appropriate trim option based on your preferences and requirements.
- Place the trim over the recessed lighting fixture and align it properly.
- Secure the trim in place using the provided screws or clips.
- If required by local code, install the accessory trim gasket GA-ATRIM to meet restricted airflow requirements. Order separately in a 6 pack: GA-ATTRIM-6PK.
Bulb Replacement
- Ensure the power is turned off before replacing the bulb.
- Remove the trim by unscrewing or unclipping it from the recessed lighting fixture.
- Remove the old bulb by twisting it counterclockwise.
- Insert the new compatible bulb into the socket and twist it clockwise to secure it in place.
- Reattach the trim to the recessed lighting fixture by screwing or clipping it back into place.
FAQ
-
Can I use higher wattage bulbs than specified?
No, it is not recommended to use bulbs with higher wattage than specified as it may cause overheating and damage to the fixture. -
Can I use LED bulbs with this product?
No, this product is designed for use with incandescent bulbs. LED bulbs may require a different type of fixture. -
Where can I find more information about the complete product offering?
You can visit the website www.cooperlighting.com for more information on the complete product offering.
Super Trim™ AIR-TITE Reflector
- Self-flanged socket supporting trim with torsion spring retention
- Accepts a wide range of lamps
- Makes installation AIR-TITE regardless of housing used
Halo AIR-TITE trims are designed to meet restricted airflow requirements. However local code may require a trim gasket regardless of trim design. Where required, use accessory trim gasket GA-ATRIM. Order separately in a 6 pack: GA-ATTRIM-6PK.
Height : 5˝ [127mm] Outside Diameter : 7-1/4˝ [184mm]
H7T|
75W PAR30, 75W PAR30L, 85W BR30, 100W R30,100W A19
---|---
H7TNB
| 50W PAR30, 65W BR30,
H7RT| 75W R30, 75W PAR30L,
| 150W A21
Super Trim™ Self Flanged Reflector
- Black Specular Reflector and Trim
- Self Flanged Socket Supporting Trim with Torsion spring retention
- Accepts a wide range of lamps
- Makes installation AIR-TITE regardless of housing used
Halo AIR-TITE trims are designed to meet restricted airflow requirements. However local code may require a trim gasket regardless of trim design. Where required, use accessory trim gasket GA-ATRIM. Order separately in a 6 pack: GA-ATTRIM-6PK.
Height : 5˝ [127mm] Outside Diameter : 7-1/4˝ [184mm]
H7T| 50W PAR30, 75W PAR30,|
---|---|---
100W R30, 85W BR30,|
150W R40, 120W BR40,|
|
H7TNB| 100W A19, 150W PAR38,
150W A21
|
| 50W PAR30, 65W BR30,|
H7RT| 75W R30, 75W PAR30L,|
| 150W A21|
Specular Reflector
- Full reflector for use with A-lamps
- Accessories available : TRM6 designer trim rings, OT403 oversize trim ring
- Can lip friction clip retention
Height : 6˝ [152mm] Outside Diameter : 7-1/4˝ [184mm]
H7T | 150W A21 |
---|
H7RT
H7TNB
Self Flanged White Reflector
- Full reflector for use with A-lamps.
- Can lip friction clip retention
- Accessories available : TRM6 designer trim rings, OT403 oversize trim ring
H7T | 150W A21 |
---|
H7RT
H7TNB
Visit www.cooperlighting.com for more information on the complete product offering. Product availability and specifications subject to change without notice.
Dayform White Cone
- Sloped sides shield interior view of housing
- Accessories available : TRM6 designer trim rings, OT403 oversize trim ring
Height : 3˝ [76mm] Outside Diameter : 7-1/4˝ [184mm]
| 65W BR30, 75W R30,
---|---
H7T| 75W PAR30, 120W BR40,
| 150W R40, 150W PAR38
| 65W BR30, 75W R30,
H7RT| 75W PAR30,
75W PAR30L, 120W
| BR40, 150W R40
Reflector Cone
- Accepts a wide variety of lamps
- Coil spring retention
- Accessories available : TRM6 designer trim rings, OT403 oversize trim ring
Height : 2-11/16˝ [68mm] Outside Diameter : 7-1/4˝ [184mm]
H930
R/PAR lamp aiming accessory for 310 and 426 trims. Allows 30° tilt and 358°
rotation.
H7T| 75W PAR30, 100W R30
H7TNB
H7RT| 50W PAR30, 100W R30
Self Flange White Reflector Cone
- Accepts R and PAR lamps
- Coil Spring retention
Height : 2-5/8˝ [67mm] Outside Diameter : 7-1/4˝ [184mm]
| 65W BR30, 75W R30,
---|---
H7T| 75W PAR30, 120W BR40,
| 150W R40, 150W PAR38
| 65W BR30, 75W R30,
H7RT|
- 75W PAR30,
- 75W PAR30L,
| 120W BR40, 150W R40
Super Trim™ AIR-TITE Baffle
- Metal Baffle
- Self-flanged socket supporting trim with torsion spring construction
- Accepts a wide range of lamps
- Makes installation AIR-TITE regardless of housing used
Halo AIR-TITE trims are designed to meet restricted airflow requirements. However local code may require a trim gasket regardless of trim design. Where required, use accessory trim gasket GA-ATRIM. Order separately in a 6 pack: GA-ATTRIM-6PK.
Height : 5˝ [127mm] Outside Diameter : 7-1/4˝ [184mm]
H7T|
- 100W R30, 150W PAR38,
- 75W PAR30,
- 75W PAR30L, 85W BR30,
- 100W A19
---|---
H7TNB
| 50W PAR30,
H7RT|
- 50W PAR30L, 100W R30,
- 85W BR30,
| 100W A19, 150W PAR38
Coilex® Baffle
- Black or White Phenolic Coilex Baffle with separate metal trim ring
- Accessories available : TRM6 designer trim rings, OT403 oversize trim ring
- Coil Spring retention
- 310WG and 310PG models with separate wider metal trim ring hides ceiling irregularities and cut-out errors
H7T|
- 65W BR30, 75W R30,
- 75W PAR30
---|---
H7RT|
-
65W BR30, 75W R30,
-
75W PAR30, 75W PAR30L
-
310W, P, SN, AC, TBZ
-
Height : 3˝ [76mm]
-
Outside Diameter : 7-1/4˝ [184mm]
-
310WG, PG
-
Height : 3˝ [76mm]
-
Outside Diameter : 8˝ [203mm]
H930
R/PAR lamp aiming accessory for 310 and 426 trims. Allows 30° tilt and 358°
rotation.
H7T | 75W PAR30, 100W R30 |
---|
H7TNB
H7RT| 50W PAR30, 100W R30
Coilex® Baffle
- Black or White Phenolic Coilex Baffle with separate metal trim ring
- 312 baffle features smaller lamp opening to conceal interior view of housing when used with PAR lamps
- Accessories available : TRM6 designer trim rings, OT403 oversize trim ring
- Coil Spring retention
Height : 2-1/4˝ [57mm] Outside Diameter : 7-1/4˝ [184mm]
H7T|
- 65W BR30, 75W R30,
- 75W PAR30
---|---
H7RT|
-
65W BR30, 75W R30,
-
75W PAR30, 75W PAR30L
-
Black or White Phenolic Coilex Baffle with separate trim ring
-
For PAR38 and R40 lamps
Height : 2-3/4˝ [70mm] Outside Diameter : 7-1/4˝ [184mm]
H7T|
- 150W PAR38,
- 120W BR40, 150W R40
---|---
H7RT| 120W BR40, 150W R40
Metal Baffle
- Metallic Finish Trim Rings and Baffles
- Coil Spring retention
Height : 3˝ [76mm] Outside Diameter : 7-1/4˝ [184mm]
H7T|
- 65W BR30,
- 75W PAR30,
- 75W R30
---|---
H7RT
Eyeball – 30° Tilt
- Provides optimum position for PAR30 lamps
- Torsion Spring retention
Aperture : 3-7/8˝ [98mm] Outside Diameter : 8˝ [203mm]
H7T | 75W PAR30 |
---|
H7RT
H7TNB
Adjustable Gimbal
- For use with PAR38 lamps
- Includes adapter for side prong lamp
- 50° tilt with side prong lamp
- 30° tilt with screw base lamp
- Torsion Spring retention
Outside Diameter : 8˝ [203mm]
H7T|
- 150W PAR38
- Side Prong Lamp recommended
---|---
H7RT
H7TNB
Adjustable Eyeball – 30° Tilt
- For use with R20 and PAR20 lamps
- Torsion spring retention
Aperture : 2-3/4˝ [70mm] Outside Diameter : 8˝ [203mm]
H7T|
- 50W R20
- 50W PAR20
---|---
H7RT
H7TNB
Eyeball – 30° Tilt
- Wide Choice of finishes for any decor
- 30° Tilt, 360° rotation
- Torsion spring retention
Height : 4-1/8˝ [105mm] Aperture : 3-15/16˝ [100mm] Outside Diameter : 8˝ [203mm]
Halo AIR-TITE trims are designed to meet restricted airflow requirements. However local code may require a trim gasket regardless of trim design. Where required, use accessory trim gasket GA-ATRIM. Order separately in a 6 pack: GA-ATTRIM-6PK.
H7T|
- 65W BR30, 75W R30 ,
- 75W PAR30,
- 75W PAR30L
---|---
H7RT
H7TNB
Double Bubble Adjustable – 60°Tilt
- Provides up to 60° of tilt
- Torsion spring retention
Outside Diameter : 8˝ [203mm]
H7T | 250W PAR38 |
---|
H7RT
Adjustable – 30° Tilt
- Regressed Gimbal with Baffle
- Torsion spring retention
Outside Diameter : 7-1/4˝ [184mm]
H7T | 75W PAR30 |
---|
H7TNB
H7RT| 50W PAR30
Adjustable with Splay – 25° Tilt
- Regressed Gimbal with Splay Trim
- Accessories available: TRM6 designer trim rings, OT403 oversize trim ring
- Friction clip on trim
Outside Diameter : 7-1/4˝ [184mm]
H7T | 75W PAR30 |
---|
H7TNB
H7RT
- Adjustable Gimbal with Splay Trim
- Accessories available : TRM6 designer trim rings, OT403 oversize trim ring
- Friction clip on trim
Outside Diameter : 7-1/4˝ [184mm]
H7T | 90W PAR38 |
---|
H7TNB
H7RT| 150W PAR38
Coilex® Baffle Eyeball – 30° Tilt
30° Tilt, 358° rotation
Outside Diameter : 8˝ [203mm]
H7T|
- 65W BR30,
- 75W R30
---|---
H7RT
H7TNB
Regressed Eyeball with Splay – 25° Tilt
- 25° Tilt, 358° rotation
- Accessories available: TRM6 designer trim rings, OT403 oversize trim ring
Outside Diameter : 7-1/4˝ [184mm]
H7T | 75W PAR30 |
---|
H7RT
H7TNB
Regressed Eyeball – 30° Tilt
- Regressed eyeball with baffle splay
- Accessories available : TRM6 designer trim rings, OT403 oversize trim ring
Height : 3-15/16˝ [100mm] Aperture : 4˝ [102mm] Outside Diameter : 7-1/4˝ [184mm]
H7T|
- 65W BR30,
- 75W PAR30L,
- 75W PAR30
---|---
H7TNB
H7RT|
- 65W BR30,
- 75W PAR30
Albalite Lens
- White Trim, Frosted Glass Albalite Lens
- PS version is wet location listed for use in showers
- Non-conductive, non-corrosive polymer trim ring
- Torsion spring retention
Outside Diameter : 8˝ [203mm]
H7T | 60W A19 |
---|
H7RT
Albalite Lens with Reflector
- White Trim with Frosted Glass Lens
- PS version is wet location listed for use in showers
- Non-conductive, non-corrosive gasketed polymer trim ring
- Torsion spring retention
Height : 4˝ [101mm] Outside Diameter : 8˝ [203mm]
Drop Opal Lens
- White Trim, Drop Opal glass lens
- PS version is wet location listed for use in showers
- Non-conductive, non-corrosive polymer trim ring
- Torsion spring retention
Drop Opal Lens with Reflector
- White Trim with Drop Opal glass lens
- PS version is wet location listed for use in showers
- Non-conductive, non-corrosive gasketed polymer trim ring
- Torsion spring retention
Fresnel Lens
- White Trim with glass Fresnel Lens
- PS version is wet location listed for use in showers
- Non-conductive, non-corrosive polymer trim ring
- Torsion spring retention
Fresnel Lens with Reflector
- White Trim with glass Fresnel lens
- PS version is wet location listed for use in showers
- Non-conductive, non-corrosive gasketed polymer trim ring
- Torsion spring retention
Diffuser
- All glass diffuser
- Provides some illumination on the ceiling plane
- Torsion spring retention
H7T | 60W A19 |
---|
H7RT
Dome Lens with Reflector
- Frosted Glass Dome
- Wet location listed for use in showers
- Non-conductive, non-corrosive gasketed polymer trim ring
- Torsion spring retention
Height : 2-1/8˝ [54mm] Outside Diameter : 7-3/4˝ [197mm]
H7T|
- 75W PAR30,
- 100W A19
---|---
H7TNB
H7RT| 50W PAR30, 60W A19
Regressed Diffuser
- Regressed glass diffuser
- Baffle splay
- Coil Spring retention
H7T | 60W A19 |
---|
H7RT
Open Trim with Socket Support
- Open trim for BR, R, and PAR Lamps
- Torsion spring retention
Aperture : 4˝ [102m] Outside Diameter : 7-1/4˝ [184mm]
H7T|
- 65W BR30, 75W PAR30,
- 75W PAR30L, 75W R30
---|---
H7TNB
Open Trim
- Open trim for BR, R, and PAR Lamps
- Coil spring retention
Outside Diameter : 7-1/4˝ [184mm]
H7T|
- 65W BR30, 75W R30,
- 75W PAR30
---|---
H7RT|
-
65W BR30, 75W R30,
-
75W PAR30, 75W PAR30L
-
Open trim for R Lamps
-
Coil spring retention
Outside Diameter : 8˝ [203mm]
H7T | 120W BR40, 150W R40 |
---|
H7RT
White Splay Trim
Coil spring retention
H7T|
- 65W BR30, 75W R30,
- 75W PAR30
---|---
H7RT|
- 65W BR30, 75W R30,
- 75W PAR30, 75W PAR30L
Coil spring retention
H7T | 120W BR40, 150W R40 |
---|
H7RT
Pinhole Trim
- 1-7/8” open pinhole
- Torsion spring retention
H7T | 50W R20 |
---|
Wall Wash
Coil spring retention
H7T | 60W A19 |
---|
H7RT
Wall Wash / Reflector Downlight
Designed to spread light on cabinets or wall close to ceiling and provide
downlighting on counters
H7T | 100W A19 |
---|
H7RT
Wall Wash with Coilex® Baffle and Scoop Reflector
- Designated to spread light close to ceiling
- Coil spring retention
H7T | 60W A19 |
---|
H7RT
Wall Wash with Baffle and Full Reflector
- Designed to spread light close to the ceiling to eliminate the “cave effect”
- Torsion spring retention
- AIR-TITE construction
H7T|
- 90W TB19, 100W A19,
- 100W BT15, 100W MB19
---|---
H7TNB
Low Voltage Adjustable Spot – 30° Tilt
- Low Voltage Trim
- Includes 120V transformer for retrofit to H7T and H7RT housings
- Torsion spring retention
H7T | 50W 12V MR16 |
---|
H7RT
Low Voltage Specular Reflector – 30° Tilt
- Low Voltage Trim
- Includes 120V transformer for retrofit to H7T and H7RT housings
- Torsion spring retention
H7T | 50W 12V MR16 |
---|
H7RT
H7TNB
Low Voltage Baffle – 30° Tilt
- Low Voltage Trim
- Includes 120V transformer for retrofit to H7T and H7RT housings
- Torsion spring retention
H7T | 50W 12V MR16 |
---|
H7RT
H7TNB
Low Voltage Eyeball with Baffle – 30° Tilt
- Low Voltage Trim
- Includes 120V transformer for retrofit to H7T and H7RT housings
- Torsion spring retention
H7T | 50W 12V MR16 |
---|
H7RT
Low Voltage Slot Aperture – 30° Tilt
- Low Voltage Trim
- Includes 120V transformer for retrofit to H7T and H7RT housings
- Torsion spring retention
H7T | 50W 12V MR16 |
---|
H7RT
Low Voltage Adjustable Accent – 30° Tilt
- Low Voltage Trim
- Includes 120V transformer for retrofit to H7T and H7RT housings
- Torsion spring retention
H7T | 50W PAR36 low voltage |
---|
H7RT
H7TNB
Low Voltage Pinhole Trim
- Low Voltage Trim
- Includes 120V transformer for retrofit to H7T and H7RT housings
- Torsion spring retention
H7T | 50W 12V MR16 |
---|
H7RT
Visit www.cooperlighting.com for more information on the complete product offering. Product availability and specifications subject to change without notice.