LINHAI SLA2 LED Mobile Phone Blue Controller User Guide
- June 16, 2024
- LINHAI
Table of Contents
LED mobile phone Blue controller
SLA2 LED Mobile Phone Blue Controller
APP Download
Scan the QR code
iOS and Android systems can download the ” LotusLamp X ” APP by scanning the
QR code. Open the browser or other tools with “Scan QR code” function, scan
the ” LotusLamp X ” QR code as
below:http://www.easytrack.net.cn/download_pro/000PUBLIC
After the software is successfully downloaded, click APK to install. After the
installation, the following program icons will appear on the desktop:
Product overview
The controller supports more than 6.0 android version 4.3 and above.
Can realize remote control on/off light, adjust the brightness of the lamp,
color, temperature, music and alarm mode.
For 160,000 colors, dozens of light patterns.
The controller is designed for LED lamp, module, etc. After setting up and
setting up the Settings, you can use your phone (IOS 6.0 or above) to control.
The remote-controlled distance can reach the indoor 15-20 meters.
Technical parameters
Connection: bluetooth 4.0 or above
Applicable to mobile phone operating system: IOS version 6.0 or above, more
than the android version 4.3 and above (there are countless groups).
Support language: English, Chinese (other languages can be set according to
the function of mobile phone system)
Working temperature: – 20 to 60
Input: 4.0-6V
Output : SPI RGB
Remote distance: indoor 8-15m
Control mode: Bluetooth OR IR Remote Controller
Remote Control Function
| brightness/speed/se nsitivity | brightness/speed/sensi tivity | ON | Off |
|---|---|---|---|
| Rhythmic cycle | 3 color loops | 7 color switching | Automatic cycle |
| Model | Model | Mode3 | Mode4 |
| Mode5 | Mode6 | Mode7 | Modell |
| Timed shutdown 1H | Timed shutdown 2H | Timed shutdown 4H | Timed shutdown 8H |
| Musical rhythm 1/2 | Musical rhythm3/4 | Musical rhythm5/6 | Musical rhythm?/8 |
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
ISED Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device. The
digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.