max power MPD1241-XB Professional Speaker User Manual
- June 16, 2024
- MAX POWER
Table of Contents
max power MPD1241-XB Professional Speaker
Product Information
Specifications
- Model: MPD1241-XB
- FCC ID: 2BBFBMPD1241-XB
- Input: 110-240V AC, 50/60Hz
- Built-in rechargeable battery: 12V, 4.5AH
- Maximum power consumption: 40W
- Manufacturer: Universal Electronics Inc.
- Address: 5610 Parkersburg Dr., Houston, TX, United States, 77036
Product Usage Instructions
Power Supply
- The MPD1241-XB speaker can be powered by either an AC power source or its built-in rechargeable battery.
- To use the AC power source, connect the provided power adapter to the speaker’s input port and plug it into a standard electrical outlet.
- To use the built-in rechargeable battery, ensure that the battery is charged. Connect the power adapter to the input port and plug it into an electrical outlet.
- The battery will automatically start charging. Once fully charged, disconnect the power adapter to use the speaker on battery power.
Volume Control
- The MPD1241-XB speaker features a volume control knob located on the front panel.
- Rotate the knob clockwise to increase the volume and counterclockwise to decrease it. Adjust the volume to your desired level.
Audio Input
The speaker provides multiple audio input options:
- Auxiliary Input: Connect an audio device using a standard 3.5mm audio cable. Plug one end of the cable into the audio device’s headphone jack and the other end into the speaker’s auxiliary input port.
- Bluetooth: Enable Bluetooth on your device and search for available devices. Select “MPD1241-XB” from the list of available devices to pair and connect.
- USB Input: Insert a USB flash drive containing audio files into the USB port located on the speaker. Use the control buttons on the speaker to navigate and play the audio files.
Speaker Placement
- For optimal sound quality, place the MPD1241-XB speaker on a stable surface, such as a table or shelf.
- Ensure that there are no obstructions in front of the speaker that may block the sound.
- Adjust the position and angle of the speaker to direct the sound towards your desired listening area.
Maintenance
To keep your MPD1241-XB speaker in good condition, follow these maintenance guidelines:
- Keep the speaker away from water and other liquids.
- Clean the speaker’s exterior with a soft, dry cloth.
- Avoid exposing the speaker to extreme temperatures.
- Do not disassemble or attempt to repair the speaker yourself.
- Contact the manufacturer or authorized service center for any technical issues.
FAQ
Q: How long does it take to fully charge the built-in rechargeable battery
- A: The charging time for the battery is approximately 4-6 hours.
Q: Can I use the speaker while it is charging?
- A: Yes, you can use the speaker while it is charging. However, please note that the charging time may be longer in this case.
Q: Can I connect multiple devices to the speaker simultaneously?
- A: No, the MPD1241-XB speaker can only be connected to one device at a time. To switch between devices, disconnect the current device and connect the desired one following the audio input instructions.
Q: Can I use the speaker outdoors?
- A: Yes, the MPD1241-XB speaker can be used outdoors. However, it is recommended to keep it away from direct sunlight and protect it from rain or excessive moisture.
- PLEASE READ THIS USER MANUAL CAREFULLY BEFORE THE SYSTEM CONNECT
IMPORTANT SAFETY MEASURES
- Beanie has achieved lane indical about sane operating. resetsarety and operating instructions should be kept in a condition of consultation.
- Protection of electric power supply line: Be aware that the electric power supply line is not tramped, or pressed by heavy objects. Pay special attention to the plug of the power supply line and outlet on the machine.
- DO NOT lengthen the electric shock, DO NOT pull or drag the power supply line.
- Ventilation: This set must be put in a ventilated place. DO NOT put the disk on it or cloth to cover it. The distance away from the wall should not be less than 10 centimeters.
- DO NOT put this set on the bed, sofa, carpet, or other objects with similar surfaces in case of good ventilation.
- Casing Dismantling: DO NOT dismantle the casing. If one touches the inner components, he will probably get a serious electric shock.
- Unusual smell: When you discover an unusual smell and smoke, cut power supplies immediately and pull out the plug from the outlet on the wall. Contact the sales shop or nearest repair center.
- Attention: This set applies to AC 110V / 50Hz~60Hz power supply. Use a standard power supply.
- Please be sure for the correct power supply before using it.
PRODUCT FEATURES
- Wireless
- Plays songs stored in an external audio device.
- Guitar input
- Microphone inputs
- Wireless microphone included
- With remote control
- Built-in rechargeable battery
- Super dynamic sound speaker
- X-Bass is powerful
REMOTE CONTROL
CONNECTING
- This set applies to AC 110V, 50/60Hz
- AC power: the battery can be charged when connected to AC power.
- The red battery light is charging, it will change to green once the battery is completely charged.
- The internal battery will be charged even device switches off when plugged into AC power
- The speaker battery can be charged using a 12V external car battery as well(connect cable not included) by “DC 12V input”. Please make sure + and – are in the right connection.
- Adjust function keys to your personal audio preference.
BATTERY & CHARGING
- The units take approximately 8 hours to fully charge. It will automatically begin charging once the power cord is connected.
- If the battery power is low may cause sound distortion or stop playing, please charge the battery on time.
- To maximize the battery’s lifespan, please charge the battery immediately. When the unit is not used for prolonged periods, the battery will gradually lose its power. It is recommended to fully charge the battery at least every 30 days.
- To save battery, please power it off once stop using it.
HOW TO CONNECT TO BT:
- When you turn on the speaker, the display will read OPEN which means your speaker is ready to connect. Go to your smart device and search for your BT device.
- You will see the device name MPD1241-XB and please select that. Please select MPD1241-XB and you will be connected.
For the TWS CONNECTION -HOW TO PAIR TWO SPEAKERS
- First, bring two speakers next to each other, and turn on both speakers. Both the speaker’s display should read open. For the first speaker/primary speaker, please press and hold the TWS button for 3 seconds.
- The primary speaker will sound an alarm and the display will show “BTST” and the second speaker automatically connect to the primary speaker. The display of the secondary speaker will say BT.
- Now you may connect to BT from your smart device and listen to music from both your speakers.
PANEL FUNCTION INSTRUCTION
- POWER ON/OFF SWITCH, RESET
- X-BASS+/-: X-BASS ADJUST
- VOLUME MASTER VOLUME ADJUST
- CARD INPUT
- AUDIO INPUT
- DC 12V INPUT: DC 12V CHARGING INPUT
- DELAY+/- ADJUST THE TIME BETWEEN THE SOURCE AND SPEAKER
- ECHO+/- ECHO ADJUST
- GT.VOL+/- GUITAR VOICE ADJUST
- MIC. VOL MICROPHONE VOLUME ADJUST
- M.HI/M.MID/M. LO MICROPHONE ADJUST
- MIC. MICROPHONE INPUT JACK 1
- GT.IN GUITAR INPUT JACK
- M.PR/ MICROPHONE PRORITY ON/OFF SWITCH
- MODE: MODE SELECT
- REPEAT
- REC: RECORDING; INSERT CARD PRESS THIS BUTTON FOR RECORDING, PRESS AGAIN TO STOP AND PLAY THE RECORDING SOUND
- LED MODE: LED MODE SELECT
- PREV: PREVIOUS SONG
- SCAN/TWS: PLAY/PAUSE/TWS/FM STATION AUTOMATIC SEARCH
- NEXT: NEXT SONG
- POWER INPUT: 110-240V,50/60Hz
FCC
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used by the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Loading......