Maiwang J1 Wireless Lavalier Microphone User Manual

J1 Wireless Lavalier Microphone
User Manual

Introduction

Thanks for choosing our product.
This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in online live broadcast, video Vlog shooting, program interview, recording, video teaching and other occasions.
The wireless Microphone consists of two parts, one Is Microphone transmitter , the other one is receiver.
(See as below picture)

ID Diagram

1. Windproof net
2. Microphone indicator
3. Microphone charging port
4. Microphone clip
5. Switch key
6. port to connect phone
7. Receiver indicator
8. Type-C port of receiver

How to use

Step 1: Connect the receiver to phone with port.

Note: oppo / vivo /iqoo /realm brand mobile phones can be used normally only when they go to the settings (search “OTG” – turn on OTG power supply)
Step 2: Press switch key of microphone, the indicator light turns green, and then power is turned on.

Step 3: The indicator light of receiver keeps always on, then open the phone camera, live App or other Apps , and then to use the microphone to receive sound.

Special Note:
For the use of 8 port : there is no battery in receiver , and no need to recharge during live. If the phone is low power during Live, it can be recharged directly through 10 port.

About UI

Microphone Transmitter

pause
Low battery alarm| Power on state| The red and green lights come on every 10 seconds
Charging| Charging with cable| The red light goes out when it is fully charged

Receiver

REVERB MODE: Press the START BUTTON 3 times continuously to enter reverb mode
Product support and listening function
This product comes with Al noise reduction, which will enter the noise reduction mode when it is started

Packing List

Content of packing

1. Microphone transmitter
2. receiver
3. charging cable
4. User manual

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Made in china

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>