EVYON Fan-010 DC Inverter Fan User Manual

Fan-010 DC Inverter Fan
User Manual Fan-010

DC inverter fan
User Manual. For household use only. Not suitable for professional use.Do not use for any other purposes as it may cause accidents.This product is intended for use in the US only.
Please read and keep the user manual carefully before using this product for future reference.
This product cannot be used overseas.

Product Introduction

Caution
The pictures n the manual are for reference only Please refer to the actual product in the packaging box.
Component Names:

Installation nstructions

A. Please read the user manual carefully before use
B. Assembly Method of the Fan

1. Pedestal Installation
   Lift the pedestal cover and take out the plastic screw cap and lower support rod from the pedestal.
   Align the lower support rod with the slots on the pedestal cover and secure it by inserting the screw cap underneath and rotating t clockwise to tighten.

2. Support Rod Installation
   Take out the middle support rod from the base. Align the screw hole of the middle support rod with the opening of the lower support rod and rotate it clockwise to tighten.Take out the middle support rod from the base. Align the screw hole of the middle support rod with the opening of the lower support rod and rotate it clockwise to tighten.

3. Installation of the Main Unit and Support Rods
   Take out the main unit from the base. Align the snap pin on the bottom of the main unit with the corresponding slots on the upper support rod and push t in until the pin securely fit into the slots.

4. Installation of Pedestal Cover and Pedestal
   Align the OPEN position of the base cover box (already installed with support rods and main unit) with the anti-misalignment slot on the base. The base cover box will be magnetically fixed to the base and securely fastened.

User Manual
C. Remote Control Operation Instructions
Caution

• The remote control should be used within 5 meters in front of the product, with a deviation angle within a range of 30 degrees.
• Batteries contain various heavy metals, acids, and other substances that can be harmful to human health. Dispose of used batteries through proper recycling methods to minimize their impact on the environment and human well-being.
• The fan may start slowly, so rotate it left and right until it aligns at the desired angle before it begins to rotate. This is not a malfunction, so please be patient.

Product Specifications

Model| Operating Voltage| Rated Power| fan speed| Air Volume| Air Delivery Distance| Noise Level
---|---|---|---|---|---|---
Fan-010| SV/9V/ 12V| 12W| 4.6m/s| 17.5m3 /min| >10m| <40dB(A)

• Use a designated power bank with the same operating voltage, current, and power as specified. Regular power banks cannot be used.

D. Remote Control Operation Instructions
Precautions

• The fan head can be manually rotated forward by 10° and backward by 60° . Once rotated into position, do not apply excessive force downward to avoid damaging the machine.

When purchasing a power bank. consider the following factors

Model| Output| Power Cord| Status| Power bank capacity/mAh| Speed Setting| Rotational speed/rpm| Working duration/h
---|---|---|---|---|---|---|---
Fast Charging Power Bank (Support PD, QC protocol)| Output 12V, 1 A or higher| Four—core Fast Charging Cable| Can Oscillate| 20000| 20| 585| about 15h
Non—Fast Charging Power Bank (No fast charging protocol)| Output
(5V-9V), 2A or higher
Cable| Four—core Fast Charging
Two—core Cable| Cannot Oscillate| 20000| 20| 585| about 22h
Output 5V lA
,| The power on its charging battery level bank will automatically adjust power capacity and protection reaches “0”.
to lower current gears based until the

Note: Please use the original fast charging power cable. When using different models of power banks, first insert the fast charging cable end into the fan interface, and then pfug the other end into the power bank interface. There is a possibility that the fan may not oscillate if the power bank model and outrut voltage interface do not meet the fan’s oscillation requirements. This s not a malfunction. Please check i the power bank model and output voltage nterface meet the fan’s oscillation requirements.

Disassembly method

1. Press the Snap Pin and lift the fan head upward.
2. Rotate the upper support rod and middle support rod counterclockwise.
3. Rotate the plastic nut counterclockwise and remove the lower support rod.

Storage method

Note: Please place the accessories in the designated positions and angles to avoid getting stuck and being unable to close the cover.

Disassembly and cleaning

1. Unplug the power, remove the fan head module, and detach the screws at the bottom of the fan cover.
2. Rotate the fan cover counterclockwise to the limit position and remove it.
3. Rotate the plastic nut counterclockwise to detach and remove the fan blades for cleaning.
4. After cleaning, reassemble the components.

Safety Warnings

Safety Precautions

• Caution: Failure to heed this warning may result in minor injuries or property damage.

• Do not disassemble, repair, or modify the machine and transformerOtherwise, t may result in injuries, electric shock, or fire.

• Ensure that the transformer and plug are inserted fully.Regularly wipe off dust from the transformer, plug, and socket.

• Do not use outlets other than domestic ones (AC 11 OV), and avoid using methods that exceed the prohibited rating.

• Using non-domestic outlets or exceeding the rated capacity with extension cords or multiple outlets may cause abnormal heating and lead to a fire.

• Using an inverter power supply or similar devices may cause malfunctions.

• If the transformer, power cord, plug, or socket is damaged or loose, do not use it as dust accumulation, moisture, or poor insulation may lead to circuit breakage, electric shock, or fire. Please exchange it at the purchased retail store.

• If there is any odor, abnormality, malfunction, damage, or excessive heat from the main unit, transformer, power cord, plug, or socket, immediately stop using it to avoid injuries, electric shock, or fire.

• Consult the sales store for repair if the plug socket is damaged. Do not damage, modify, approach the heater, forcefully bend, twist, pull, or use spring on the transformer, power cord, plug, or socket as it may cause circuit breakage, electric shock, or fire.

• Do not place heavy objects or the base on the power cord or between power cords as it may cause circuit breakage, electric shock, or fire.

• Always stop the operation when cleaning. Disconnect the transformer from the outlet and unplug the plug from the plug socket to avoid injuries, circuit breakage, or electric shock.

• Do not use the supplied transformer for other products.Do not use transformers from other products for this product.

• Assembly must be done in a safe environment. Improper assembly may cause the product to tip over, components to detach, blade damatte. or splashing, resulting in njuries. Do not insert or remove the transformer or plug with wet hands as it may cause circuit breakage or electric shock,

• Do not wet the connectors or assemble/disassemble the equipment with wet hands as it may cause circuit breakage, electric shock, or fire.

• Do not assemble or disassemble the machine while t is plugged in. Incorrect operations may result in damage, injuries, or circuit breakage.

• When the transformer is not in use for an extended period, unplug it from the wall outlet to prevent electric leakage, electric shock, or fire due to decreased insulation performance.

• Keep the plastic bag used for packaging out of reach of children.Do not place it on your face or wrap t around your face. Accidental contact or entanglement with the face may cause suffocation.

• Do not use this product in environments with flammable gases or substances (such as gasoline, solvents, etc.) to avoid the risk of explosion or fire.

• Do not allow children or individuals who are not capable of operating the product to use t alone. Do not use or store it in places accessible to infants.Otherwise, it may cause njury or electric shock.

• Do not insert pins, wires, or other metallic objects or prohibited foreign objects into the plug, socket, connector, slot, or opening, as t may result in short circuits, electric shock, or fire.

• Do not immerse the main unit, transformer, or plug in water for cleaning or directly spray water on them, as it may cause breakage, electric shock, or fire.

• Do not use it in damp areas such as bathrooms or outdoor environments exposed to rain, as it may cause breakage, electric shock, or fire.

• Do not insert fingers, sticks, or other objects into the protective cover, moving parts, or gaps, as fingers may get trapped or come into contact with rotating parts, leading to injuries. Pay special attention to child safety.

• While operating, do not use the protective cover to change the direction of the airflow. Forcing the operation of the machine with the protective cover may cause the blades to collide with the cover, resulting in damage to the blades or

• scattering of the  blades, causing harm.

• Do not let the plug be licked, as it may cause injury or electric shock. Take extra precautions to prevent children and pets from accessing it.

• Do not violently collide with the main body, transformer, or plug. Otherwise, it may cause electric shock or fire.

• Do not pull the power cord to extend and unplug the transformer or plug, as it may result in breakage, electric shock, or fire. It is necessary to hold the transformer or plug firmly when unplugging.

• Avoid prolonged contact with the transformer as it may cause low-temperature burns. Do not use this product for commercial purposes, as it may exert excessive pressure on the product, leading to damage or malfunction.

• Do not use this product near curtains or other obstacles or in unstable locations. Installing it in an unstable place may cause it to tip over or fall, resulting in damage.

• Be careful of fingers getting caught between the main body or column during installation or removal.

• Do not blow air for a long time as it may cause health problems.

• Do not use your hand to hold the fan guard or main body to stop the left/right automatic rotation.After stopping the operation, tis prohibited to immediately clean the area around the motor shaft,

• Do not use spray cleaners as it may cause fading, degradation, and damage.

• Handle dry batteries with care, as mishandling may result in injury, explosion, or fire.

• Do not use outdoors, as t may cause malfunction, electric shock, or fire.

• When using this product in a room with cats or dogs, please be careful.Otherwise, it may damage the main body, transformer, power cord, and plug, leading to malfunction, electric shock, and fire.

• When installing the commercially available fan cover onto the guard, please fasten it securely. If it becomes loose, it may cause damage, malfunction, and injuries.

• During operation, keep hair and clothing (including cords) away from the guard.There is a risk of hair and clothing getting caught, which can result in damage, accidents, and injuries.

• When moving the fan, please take note of the following:The installation position may be damaged and could potentially cause malfunction, breakage, or fire.Do not rotate the fan while moving it. Before moving the product, stop its operation, unplug the AC adapter from the power outlet, and then unplug the plug. Do not pull the fan by gripping the power cord or drag it along.It is extremely dangerous to remove the protective guard while the fan is running. Sud, actions are strictly prohibited,

• Do not use bundled cables, as they may cause breakage, electric shock, or fire. Be sure to remove any cable ties.

• During installation, please be careful to avoid injury.

• Pay attention to the markings/signs.When assembling the main unit, firmly grasp it to ensure it remains stable.
  Assembling it while in a tilted position can cause damage to the threads or connectors.

• The included batteries are for testing purposes and may have low power. If the remote control is not functioning, please replace the batteries.

• Ensure the correct orientation of the + and – signs on the batteries and battery compartment, then insert the batteries correctly and close the battery cover.

• replace and purchase the battery with a size seven battery that is the same as the remote control battery on the market,

• Make sure to insert the batteries with the correct polarity(+ and-). Do not mix new and old batteries or different types of batteries.Do not use damaged (deformed or scratched) or foreign object-adhered batteries.If you come into contact with a leaking battery, thoroughly wash with water and consult a doctor.Do not touch the liquid with your hands.If the remote control will not be used for an extended period, remove the batteries.

• When disposing of used batteries, be sure to insulate each terminal with vinyl tape and follow local government guidelines for disposal.

• Point the remote control transmitter at the remote control receiver and press the buttons for operation.he operating range of the remote control is approximately 5 meters.

  • The remote control may not work in the following situations:
  • Places where there are obstacles between the remote control transmitter and receiver, excluding protective materials and blades.
  • Places where the remote control receiver is exposed to direct sunlight or strong illumination.
  • Places where frequency-controlled lighting fixtures are used.

• Do not drop, step on, tamper with the remote control transmitter, or allow liquids to come into contact with the remote control.

• When the power supply is interrupted, such as when unplugging the AC adapter from the outlet, the settings will be reset.

• Depending on the fan speed, it may produce resonance noise, but this is not a malfunction.

• When storing the adapter, do not forcefully bend the root of the cable or forcefully insert the cable. Please neatly store the cable. Improper storage may cause abnormal heating, breakage, or fire.

• When storing, place all components n their designated positions.

• Before storage, please thoroughly clean and dry the base and main components. Place them in their corresponding compartments in the storage bag. Avoid direct sunlight and moisture during storage (storing in a damp condition may cause mold, odor, or malfunction).

• Do not handle the storage bag roughly or place any items on top of it. Do not wash the storage bag n a washing machine or iron it. Use diluted neutral detergent with water or warm water for gentle washing. Wipe off any moisture and dry in a cool place.

• Do not disassemble or modify the machine. Do not heat or place it in a fire. Do not place or store it where infants can reach it, as it may cause accidents. If any parts are swallowed, seek medical attention immediately.

• Do not use in the following places, as it may cause deterioration, deformation, electric shock, or fire:Near heat sources (stove, furnace), direct sunlight, or high-temperature areas.Places such as kitchens or factories where oil and oil fumes are generated.Places with a lot of dust or metal powder.

Regarding Long-Term Use
Products that have been used for many years may experience deterioration of internal components due to heat, moisture, dust, etc., which can result in smoke or fire. If you experience any of the following symptoms while using this product, please turn off the switch, unplug the transformer (power plug) from the socket, and contact the seller.

• The fan blades do not rotate even when the switch is turned on.
• The rotation of the fan blades is abnormal or irregular.
• Unusual noise or vibration during rotation (friction sound, contact sound).
• Excessive heat or burnt smell from the motor.
• Bent or damaged power cord.
• Unstable rotation, sometimes spinning and sometimes not spinning when touching the power cord.

Items that may cause minor injuries or property damage

• When the machine is not in use or when leaving the vicinity of the machine, turn off the power and unplug the power cord to prevent circuit malfunctions and accidents.
• Before use, check if the voltage matches the product’s specifications.
• Before use, inspect the power cord and plug for any damage. If the power cord is damaged, it must be replaced by a professional from the manufacturer, their repair department, or a similar authorized service center.

Cleaning and Maintenance

Precautions

• Before cleaning this product, make sure to disconnect the power supply.
• Do not directly rinse the body of the fan with water.
• Do not use any abrasive tools or solvents that may damage the surface of the product. You can use cleaning detergent for cleaning and wipe it dry with a cloth.
• It is prohibited to disassemble the product for modification. It is recommended to regularly inspect and clean the product to extend its lifespan.
• Maintenance: Use a soft-bristle brush to remove dust and a dry soft cloth to wipe away dirt and dust. For stubborn dirt, soak a soft cloth in water or diluted neutral detergent, squeeze it, and then wipe. Finally, use a dry soft cloth to wipe dry.
• When maintaining the adapter, plug, and socket, use a dry soft cloth to wipe away dust and dirt. Make sure to use a dry cloth to wipe away dirt from the adapter, plug, and socket.
• If there is a large amount of dust accumulated on the main body (motor part), protective cover, or fan blades, it can cause abnormal noise, vibration, and overheating of the motor. Please remove the protective cover and fan blades promptly for cleaning.

fault analysis

※ Before seeking advice or requesting repairs, please check the following:

socket?
● Is the transformer (power plug) unplugged from the wall socket?
Make sure to plug it into the socket.
Fan blades not rotating, No airflow| ● Have you assembled the fan blades in the correct direction?
Abnormal noise and vibration| ● Is the protective cover and fan blades properly assembled?
Motor overheating| ● Is there accumulated dust on the fan blades, protective cover, or main body?
● Use a vacuum cleaner to remove dust and perform maintenance.

Product Return & Warranty
Upon delivery of the goods, you are entitled to a 30-day free return, as well as a 1-year replacement service.
Within 30 days of receiving the product, should you have any dissatisfaction or encounter any quality issues with the product, you are eligible to utilize free return at any time. Refunds will be returned to the original purchaser through the original payment method.
If any quality ssues with the product tself arise within 1 year of the purchase, please feel free to contact us.
Once we have approved your request, we will provide you with a replacement service. Each product has no other warranties other than the already provided warranties.
This warranty s non-transferable. Evyon is not responsible for any damages, losses or inconveniences by equipment’s failure, user’s negligence, user’s abuse, or mproper operation that does not follow the included user manual.
This warranty does not apply to the following situations:
Damage due to abuse, accident, alteration or vandalism.
Improper or inadequate maintenance.
Damage in return transit.
Unsupervised use by children under 18 years old.
Environmental note
This appliance has been made from high quality materials and parts whice can be reusde and are suitable for recyling Do not dispose of the appliance with normal household waste at the end of its service life consult your local authorities for disposal information and facilities avaiable.
Help protect the environment by recyling used appliances.

Thank you for choosing our product!
Due to continuous product improvements, the product you purchased may differ from the illustrations in the manual, without further notice. Please refer to the actual product.
Manufacturer: Evyon Technology (Chengdu) Co.,Ltd
Address: Building 1, Floor 3, Room 309, No. 1266 Nanhua Road, Chengdu Gaoxin District, Sichuan, China
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>