Unii Silicone Wedding Ring User Guide

Unii Silicone Wedding Ring

Product Information

Specifications

• Product Name: UNII Complete Sizing Guide
• Applicable for: Unii rings

FAQ

• Q: What should I do if I need help?
  • A: Our team is always happy to assist you. Don’t hesitate to contact us anytime at [email protected].
• Q: When is the best time to measure my fingers?
  • A: Measure your fingers later in the day when they’re warm. Avoid measuring on a very hot day or after consuming alcohol and salty foods.
• Q: What should I do if I have big knuckles with thinner fingers?
  • A: Measure both your knuckles and fingers and choose a ring size in between.
• Q: Should I measure my dominant hand or non-dominant hand?
  • A: Your dominant hand may be 1/2 size larger than your other hand, so measure the hand you intend to wear the ring on.
• Q: Can I use a measuring tape to measure my finger?
  • A: No, it is recommended not to use a measuring tape as it may result in the wrong fit.

Product Usage Instructions

Method 1: International Conversion Chart

If you are an international buyer, follow these steps:

1. Go to page 2 of the guide.
2. Check the CONVERSION CHART to convert your UK/Australian ring size to US.

Method 2: Ring Sizer

If you already own a ring that fits comfortably, follow these steps:

1. Go to page 3 of the guide.
2. Print the page at 100% scale.
3. Place a ruler below the printed page and check if the line measures exactly 50mm/2 inches.
4. Find a ring that fits you or your loved one comfortably.
5. Place the inner part of the ring on top of each circle on the guide until you find the perfect match.
6. Make sure that the circle makes contact with the inside of your ring.
7. Note that each ring size covers a full size due to the flexibility of the silicone material. For example, if you are a size 7 or 7.5 in the circles, go for our ring size 7-7.5.

Method 3: Ring Sizing Tool

If you do not know the ring size needed or want to double-check, follow these steps:

1. Go to page 4 of the guide.
2. Print the page at 100% scale.
3. Place a ruler below the printed page and check if the line measures exactly 50mm/2 inches.
4. Cut the tool provided on the page.
5. Place a strip of tape where indicated on the tool.
6. Apply the tape to the inside of your ring finger, where you  want the ring to sit.
7. Wrap the paper snuggly around your finger until you have a secure, comfortable fit.
8. Make sure it is not too loose or too tight.
9. The pointed end of the paper indicates your ring size.

Method 4: Size Chart

If you cannot print the Sizing Guide, follow these steps:

1. Follow the instructions provided on the SIZE CHART carefully.

Introduction

IMPORTANT

• Make sure to print this PDF at 100% scale for accurate measurements.
• Use the ruler on to check the scale.

For best accuracy, use 2 of the methods below

• International buyers:
  • Go to page 2 and check our CONVERSION CHART to convert your UK/Australian ring size to US.
• You own a ring that fits comfortably (or you can sneak your partner’s for a surprise gift) :
  • Go to page 3 and place your ring on our RING SIZER to find out what size fits it best.
• You do not know the ring size needed, or want to double-check :
  • Go to page 4 and use our SIZING TOOL for easy and accurate measurement of the finger.
• You cannot print this Sizing Guide :
  • Go to page 5 and follow the instructions of our SIZE CHART carefully.

Conversion chart

Unii international ring size Conversion chart

Unii ring sizer

1. Make sure to print this page at 100% scale.
   • Place a ruler below . If the line measures exactly 50mm/2inches, you’re good to go!
2. Find a ring that fits you/your loved one comfortably.
   • (Make sure that ring is worn on the finger you are shopping for)
   • Place the inner part of the ring on top of each circle until you find the perfect match.
   • It’s important that you can see the circle making contact with the inside of your ring.
3. Each of our ring size covers a full size due to the flexibility of the silicone material (7-7.5, 8-8,5, etc…).
   • So if you are a size 7 or 7.5 in the circles below, go for our ring size 7-7.5 for example.

Unii ring sizing tool

1. Make sure to print this page at 100% scale.
   • Place a ruler below . If the line measures exactly 50mm/2inches, you’re good to go!
2. Cut the tool below.
   • Place a strip of tape where indicated. Apply it to the inside of your ring finger, where you want the ring to sit.
   • Wrap the paper snuggly around your finger until you have a secure, comfortable fit.
   • Make sure it is not too loose or too tight.

The pointed end of the paper indicates your ring size.

SOME TIPS & TRICKS

• Measure your fingers later in the day when they’re warm.
• Avoid measuring on a very hot day or after consuming alcohol and salty foods.
• If you have big knuckles with thinner fingers, measure both and choose a ring size in between.
• Your dominant hand may be 1/2 size larger than your other hand, so measure the hand you intend to wear the ring on.

Unii Size chart

Unii Size chart – No printer needed

• Do you find it difficult to take measurements on your own?

  •   * Simplify the process by bringing in an extra pair of hands.

• Don’t use a measuring tape or you may end up with the wrong fit.

WHAT’S MY RING SIZE?

1. Cut a piece of string  or thin strip of paper at least 3 inches long (no measuring tape).
2. Wrap it snugly at the base of your ring finger.
3. Using a pen or pencil, mark where the ends overlap.
4. Lay it flat and measure the length between lines. That’s your circumference.

NEED HELP?

• Our team is always happy to assist you. Don’t hesitate to contact us anytime.
• [email protected]

Copyright©2023 Unii – All Rights Reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>