Brace Align KNB247 KOAlign II OA Unloader Knee Brace Instructions
- June 16, 2024
- Brace Align
Table of Contents
Brace Align KNB247 KOAlign II OA Unloader Knee Brace
Product Information
Specifications
- Product Name: KOAlign II Adjustable OA ROM Knee Brace
- SKU: KNB247
Product Usage Instructions
-
Step 1: Detach and Adjust Straps
Detach all buckles and set each strap to its loosest setting for first-time application. -
Step 2: Strap Placement
Ensure that strap 1 is positioned above the calf. Adjust the length of strap 1 for a secure fit. Proper placement of strap 1 is important to prevent sliding. -
Step 3: Fasten and Adjust Straps
Fasten straps 2, 3, and 4 and adjust their lengths for a secure fit. -
Step 4: Pain Relief Adjustment
Using the provided hex tool, insert it into the slot above the hinge. Turn the tool counterclockwise for medial (inner) pain relief and clockwise for lateral (outer) pain relief. Test the comfort level by walking. Additional adjustments can be made until maximum pain relief is achieved. -
Step 5: Range of Motion Stops (Optional)
If you require flexion/extension control, follow these steps:- Use the screwdriver to loosen the screws on the hinge.
- Insert the desired stop into the hinge.
- Tighten the screw back into place.
Care Instructions
BraceAlign should be cared for as follows:
- Regularly wipe the brace with a clean, damp cloth to remove dirt and sweat.
- Avoid using harsh chemicals or solvents that may damage the brace.
- Allow the brace to air dry before storing it.
Frequently Asked Questions
-
Q: How do I adjust the strap lengths?
A: To adjust the strap lengths, detach all buckles and set each strap to its loosest setting. Then, fasten the straps and adjust their lengths for a secure fit. -
Q: How do I adjust the pain relief settings?
A: Use the provided hex tool to turn counterclockwise for medial (inner) pain relief and clockwise for lateral (outer) pain relief. Test the comfort level by walking and make additional adjustments until maximum pain relief is achieved. -
Q: What are the range of motion stops for?
A: The range of motion stops are optional and are used for flexion/extension control. They can be inserted into the hinge to limit the range of motion of the knee. -
Q: How do I care for BraceAlign?
A: Regularly wipe the brace with a clean, damp cloth. Avoid using harsh chemicals or solvents. Allow the brace to air dry before storing it. -
Q: Where can I find more help or information?
A: Visit our website or scan the provided QR code for more information or assistance with fitting and usage.
Prefer watching videos?
We’ve got you covered!
Visit our YouTube @BraceDirect or scan the QR code
Instructions For Use
- Step 1. Detach all buckles and set each strap to its loosest setting for first time application.
- Step 2. While seated with the knee at a 90º angle, place a condyle pad on the outside center of the knee directly on the skin or a knee sleeve.
- Step 3. Ensure strap 1 is above the calf and adjust strap length for a secure fit. Strap 1 placement is key to preventing sliding.
- Step 4. Fasten straps 2, 3, and 4 and adjust strap length for a secure fit.
- Step 5. Using the hex tool, insert it into the slot above the hinge and turn counterclockwise for medial (inner) pain and clockwise for lateral (outer) pain.
- Test by walking. Additional adjustments can be made until the maximum pain relief is achieved.
- Step 6. Range of motion stops – use only if you need flexion / extension control. Use the screwdriver to loosen the screws. Insert the desired stop into the hinge. Tighten the screw back into place.
Care Instructions
- Spray with a 50% Alcohol/Water Mixture
- Rinse and Air Dry.
- Do NOT dry clean, iron, or bleach.
Need Help
Still need help?
Perfect Fit Guarantee!
- Visit our website or scan the QR code to find out more.
- BraceDirect.com • 6860 Big Ridge Rd • Hixson, TN 37343 • 800-257-5870.
