CACGO Smart BraceletK62 Smart Bracelet User Manual

CACGO Smart BraceletK62 Smart Bracelet

Specifications

• Compatible System: Android 4.4 and above, iOS 8.0 and above
• APP: FitCloudPro

Product Usage Instructions

Charging
Please make a full charge before using the smart bracelet.

APP Installation
To use the smart bracelet, you need to install the FitCloudPro app. Follow the steps below:

1. Long press the home key to turn on the smart bracelet.
2. Scan the QR code below or download FitCloudPro from the App Store or Google Play Store.
3. Install the FitCloudPro app on your mobile device.

Bluetooth Connection
To connect the smart bracelet to your mobile device via Bluetooth, follow these steps:

1. Turn on the Bluetooth on your mobile phone.
2. Open the FitCloudPro app and tap “Add a device” to connect.
3. On the smart bracelet, go to the phone menu.
4. Check the watch menu for the MAC address’s last four numbers (e.g., 6326).
5. On your mobile phone, go to Bluetooth settings and search for the same Bluetooth name with the last four numbers (e.g., 6326).
6. Finish the Bluetooth connection following the on-screen instructions.

Smart Bracelet Functions

• Time Interface

  • Power On
    To power on the smart bracelet, long press the OPEN key for 3 seconds.

  • Power Off
    To power off the smart bracelet, press the OPEN side button on the time interface for 3 seconds, then click the power icon to turn it off.

  • Switch Watch Face
    On the main watch face, press the screen to switch between four interface options. The fourth dial can be manually replaced with user-defined pictures or photos on the FitCloudPro app.

• Functions Menu

  • Activity Records
    Records steps taken throughout the day.

  • Sleep Monitor
    Sleep monitoring period: 8:00 PM to 10:00 AM. Make sure to wear the bracelet device during sleep for accurate monitoring.

  • Exercise
    Allows for tracking and recording exercise activities.

  • Heart Rate Monitor
    Monitors heart rate.

  • Blood Pressure Detection
    Detects blood pressure.

  • Blood Oxygen Detection
    Detects blood oxygen levels.

  • Weather
    Slide up the screen to check the weekly weather information.

  • Player
    Enter Bluetooth music mode. Click the middle icon to pause or continue playback. Tap the left icon to play the previous song and the right icon to play the next song.

  • Notifications Push
    Turn on notifications for social apps like Facebook, Twitter, Skype, etc., on the FitCloudPro app. Note: For Android phones, enable FitCloudPro app notifications in the Accessibility settings.

  • Pop-up Menu
    Slide down the screen from the main watch dial to access the pop-up menu with the following options:

  • Phone

  • About

  • Menu View

  • Vibration or Mute Mode

  • Brightness Adjustment

  • Setting

Functions on FitCloudPro App

• Data Sync
  All measured data from the smart bracelet will be synced to the FitCloudPro app on your mobile phone. This includes step count, sleep monitor, heart rate, blood pressure, blood oxygen, and other data.

• Smart Bracelet Connection Interface
  Users can manually replace user-defined pictures or photos on the smart bracelet.

• Notifications
  Turn on notifications for social apps like WeChat, Facebook, WhatsApp, Twitter, etc.

• Alarms
  Set alarms with three options.

• Shutter
  Control the mobile phone camera shutter remotely.

• Others
  Includes features like finding the smart bracelet, setting time formats, setting the time of no disturbing, sedentary reminder, full-day heart-rate monitor, quick view screen, weather display, drink water reminder, and physiological cycle reminder.

FAQ (Frequently Asked Questions)

• How do I charge the smart bracelet?
  Please make a full charge before using the smart bracelet. Connect the provided charging cable to a USB power source and attach the other end to the charging port on the smart bracelet.

• How do I install the FitCloudPro app?
  You can scan the QR code provided in the user manual or download FitCloudPro from the App Store or Google Play Store.

• How do I connect the smart bracelet to my mobile device via Bluetooth?
  Turn on the Bluetooth on your mobile phone, open the FitCloudPro app, and tap “Add a device” to connect. Follow the on-screen instructions to complete the Bluetooth connection.

• How do I switch watch faces?
  On the main watch face, press the screen to switch between four interface options. The fourth dial can be manually replaced with user-defined pictures or photos on the FitCloudPro app.

• How do I enable notifications for social apps?
  Turn on notifications for social apps like Facebook, Twitter, Skype, etc., on the FitCloudPro app. For Android phones, enable FitCloudPro app notifications in the Accessibility settings.

Download APP

1. Long press the home key to turn it on.
2. Scan the below QR code to install the FitCloudPro APP, Or download“FitCloudPro” from the App Store, or Google Player then install it.
   Compatible System : Android4.4 and above， iOS 8.0 and above

BT Calling Version connecting

• Step1: Turn on mobile phone Bluetooth
• Step 2: Open the “FitCloudPro” APP and tap “Add a device” to connect.
• Step 3: Turn on the phone menu on the watch.
• Step4: Check the watch menu“about” MAC address last four numbers like “6326”, then go to mobile phone “setting-Bluetooth” to search for the same bluetooth name with the last 4 numbers “6326” to finish the BT connection as below operation.

Smart bracelet Functions

Time Interface

1. Power on: Long press the OPEN key for 3 seconds.
2. Power off: On the time interface， press the “OPEN” side button for 3 seconds, then click the” √“ icon to turn off
3. Switch watch face: Long press the screen based on the main watch face,4 interface options, and the 4th dial can manually replace user-defined pictures or photos on the APP

Functions menu

1. Activity records (Step records)

2. Sleep monitor
   Sleep monitor period: 8:00 PM to 10:00 AM Pls make sure to wear the bracelet device

3. Exercise****

4. Heart Rate Monitor****

5. Blood Pressure Detection

6. Blood Oxygen Detection****

7. Weather（Slide-up screen can check this week’s weather information)****

8. Player
   (Enter BT music, click the middle icon to pause or continue， tap the left icon to play the last song， tap the right icon to play the next song）

9. Notifications push
   

   • Turn on the FitCloudPro app” Notifications” social app like
   • Facebook, Twitter, Skype etc,
   • Pay attention to Android mobile phone setup: FitCloudPro app/Notification/Accessibility to turn on“FitCloudPro”

Pop-up menu

(Slide down the screen from the main watch dial)

1. Phone
2. About
3. Menu view
4. Vibration or mute mode
5. Brightness adjustment
6. Setting

Functions on FitCloudPro App

Data sync
All measured data from the smart bracelet will be synced on the mobile phone FitCloudPro app eg: steps, sleep monitor, heart rate, blood pressure, blood oxygen and other data as below Pic.

smart bracelet connection interface

1. Watch Faces (users can manually replace user-defined pictures or photos)

2. Notifications
   (Turn on social apps message push like WeChat, Facebook, Whats’App, Twitter etc)

3. Alarms
   (3 options)

4. Shutter

5. Others
   (Find my smart bracelet, Time formats, Setting time of no disturbing, Sedentary reminder, Full-day heart monitor, Quick View screen, Weather, Drink Water reminder, Physiological cycle reminder）

   • Power on “Find my bracelet” mode, the bracelet will vibrate when the Bluetooth is connected successfully between mobile phone and smart bracelet.

   • Time format （ 2 options of 12&24hours system）

   • Time format （ 2 options of 12&24hours system）

   • Setting mode of no disturbing

   • Sedentary reminder (Valid period 10:00 AM-10:00 PM)

   • Full-day heart-rate monitor ( Turn on it can detect your whole day’s heart rate）

   • Quick view screen: wake up screen (turn on it and choose a valid period)

   • Drink Water Reminder

   • Weather
     (Turn on the weather, choose the city you want or automatic location, the band will show the located city’s weather )

   • Physiological cycle reminder
     (Notes： Please kindly note that the above functions are working based on activated and saved the related setup）

Warm notes

1. Connect Bluetooth：
2. Please power on your phone Bluetooth and turn on the smart bracelet Bluetooth before connecting;
3. Please ensure your smart bracelet didn’t connect with another phone before connecting；5.1.3 Please keep close to your smart bracelet when you are connecting.
4. Please turn on mobile phone notifications and allow permissions to run in the background if your Mobile has installed “ Mobile Manager” or other similar Apps, otherwise, you will not receive the messages.
5. Battery Recharge: Power adaptor: 5V 0.5~1A

Disclaimer
Warning: This product is not a medical device. The smart band and its applications should not be used in diagnosis, treatment or as a preventive treatment for diseases and sickness. Please consult medical professionals before changing your exercise habits or sleep habits to avoid serious injuries. The manufacturer reserves the right to modify and improve any function description in this user guide and continuously update the new content without further notice. This user guide is for reference only, the smart band for selling is subject to the final product.

FCC NOTE

This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. ct.

The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>