QAZQA Pua HL Design Hanging Lamp Instruction Manual

QAZQA Pua HL Design Hanging Lamp

Product Information

Specifications

• Model : Pua HL
• Input Voltage: 220-240V~
• Frequency : 50Hz
• Socket Type: E27
• Maximum Wattage : 40W

Product Usage Instructions

Safety Precautions

Before using the product, please read and follow these safety precautions:

• Ensure the power supply is compatible with the product specifications.
• Do not exceed the maximum wattage (40W) indicated for the product.
• Make sure the product is installed and used in a well-ventilated area.
• Avoid touching the bulb or socket when the product is in use as they may become hot.
• Keep the product away from water or other liquids to prevent electrical shock or damage.

**Installation

**

To install the product, follow these steps:

1. Ensure the power supply is turned off before starting the installation.
2. Screw the Pua HL bulb into the E27 socket firmly but gently.
3. Place the product in the desired location, ensuring it is securely mounted or hung.
4. Turn on the power supply and test the product to ensure it is functioning correctly.

Maintenance

To maintain the product’s performance and prolong its lifespan, please adhere to the following guidelines:

• Regularly clean the product with a soft, dry cloth to remove dust or dirt.
• Do not use any harsh chemicals or abrasive materials to clean the product.
• Check the product’s electrical connections periodically to ensure they are secure.
• Replace the bulb with a new one when it reaches its maximum lifespan or if it becomes damaged.

Troubleshooting

If you encounter any issues with the product, refer to the following troubleshooting steps:

1. Check if the power supply is connected properly and turned on.
2. Ensure the bulb is securely screwed into the socket.
3. Verify that the bulb is not burned out by testing it in another compatible fixture.
4. If the problem persists, contact our customer support for further assistance.

FAQ

• Q: What is the maximum wattage for the Pua HL bulb?
• A: The maximum wattage for the Pua HL bulb is 40W.
• Q: Where can I find the product’s specifications?
• A: The product’s specifications can be found in the user manual or on the manufacturer’s website.
• Q: How do I clean the product?
• A: To clean the product, use a soft, dry cloth to gently wipe away any dust or dirt. Avoid using harsh chemicals or abrasive materials that may damage the product.
• Q: What should I do if the bulb burns out?
• A: If the bulb burns out, you can replace it with a new one. Make sure to use a bulb with the same specifications (E27 socket, maximum 40W).

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.

2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.

3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.

4. Exterior lighting must not be installed during rain.

5. Take account of the minimal separation distance from other objects and the room required around the fitting.

6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.

7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.

8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components

9. Take account of all available technical information.

10. Meaning of symbols:
    ****This icon indicates the level of water-proof and dust-proof
    Protection Class I: the fitting must be earthed
    Protection Class Il: the fitting is doubled insulated and does not require earthing
    Protection Class III: the fitting is low-voltage
    Minimum distance from lighted objects (meters)
    The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
    The armature is designed to work only with the indicated voltage. Different items require different working voltages.
    The luminaire can be used in combination with a dimmer
    The luminaire can be dimmed by a wall switch
    The reference light angle and light space of the luminaire
    This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste

11. Take note of the symbols when connecting wires:
    L| Li ve co n duc tor
    ---|---
    | Ea r t h

co n d u c t o r

N| Ne utr a l

con du c t or

FittinQ B.V. Smaragdweg 52, 5527 LB Hapert, The Netherlands www.qazqa.nl

FittinQ LTD 55 Baker Street, London, WIU 7EU United Kingdom

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>